. RCD CL101S THICK FILM SIP NETWORKS CL SERIES - Low Profile C SERIES - High Power . Low cost, widest selection in the industry! Term.W is RoHS 4-pin through 14-pin standard (2 through compliant 260°C 20-pin sizes available on special order) RoHS &compatible CL Series low-profile available from stock (configuration1 & 2 in 6, 8, and 10-pin) Wide resis. range: 10Ω to 3MΩ std., 1Ω to 1000M avail. Bulk packaging is standard, tape or magazine tube avail. R/2R Ladder Networks (Config. 7) offer 1/2LSB accuracy from 4 to 10 bits >> > 1 >> > >> > >> > >> > >> > >> > >> > DIMENSIONS >> > >> > 1 RCD C101 diodes, increased power & voltage, tolerance & TC matching, longer pins, special marking, military burn-in, resis. values 1Ω to 1000M, etc. Configuration No. 2 . . . . . . . RCD CL101 OPTION V - +200°C temperature Range OPTION S - Super high density (.070” pin spacing) OPTION P - Pulse tolerant design OPTION N - Narrowline design (.070” thick) OPTION F - Flameproof coating OPTION C - Copper alloy terminals Also available in custom circuits with multiple values/capacitors/ STANDARD CONFIGURATIONS Configuration No. 1 RESISTORSCAPACITORSCOILSDELAY LINES ←New high density Sips, an RCD exclusive! → .095 [2.4] Max. Opt. N= .070±.008 [1.8±.2] >> > ← ←Length=0.1” X No. of pins max→ ↑ C=.315 [8] Max. CL=.195 [5] Max. Pin #1 . .> .> > R2> R2> . .> > > > R1> R1> 1 .> . .> R2> .> > R1> .> .> R2> .> > R1> .> .> > R2> . > R1> .> ↓ Configuration No. 4 .> R2> .> > R1> .> 1 . . . . . . > > > > > > > > > > > > > > > > > > .011 [.28] → ← .020 [.5] Dimensions: Inch [mm] Configuration No. 6 Configuration No. 5 1 > > > > > > > > > R R R vvv vvv vvv > > > > > > 1 > 2R >> 2R >> 2R >> 2R >> 2R 1 CL GND LSB % OF RATED POWER 330/470 330/680 3K/6.2K 6Bit/8-pin, 7Bit/9-pin, 8Bit/10-pin, 9Bit/11-pin, and 10Bit/12-pin. Available in Series C (low profile Series CL n/a). Linearity accuracy is 1/2LSB. Standard values are 5KΩ, 10KΩ, 25KΩ, 50KΩ, & 100KΩ ±2%. CL 08 2 - 102 - G B Type: CL=low profile (std), C=high power Number of Pins Configuration Number Options: V,S,P,N,F,C (leave blank if std) Resis.Code 1%: 3 signif. figures & multiplier, (e.g. 10R0=10Ω, 1000=100Ω, 1001=1K, 1004=1M) Resis.Code 2%-5%: 2 signif. figures & multiplier, (e.g. 100=10Ω, 101=100Ω, 102=1K, 103=10K, 104=100K, 105=1M) When comprised of 2 res.values (config.3&7) separate with /, e.g. 181/391=180Ω/390Ω Tolerance Code: G=2% (standard), F=1%, J=5% Packaging: B=bulk, A3=3 pin taping ammo pack, M=magazine tube Opt. TC: 50=50ppm,101=100ppm (leave blank if standard) Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable) .125W** .5W Opt.S=.070± .01 [1.78 ±.25] 1W 1.25W 1.5W 1.75W 2W 2.5W W (Option V) 120 100 80 60 40 20 0 DERATING (Series C and CL) 100 R/2R LADDER NETWORKS (Config.7): 4Bit/6-pin, 5Bit/7-pin, P/N DESIGNATION: .3W 120 STANDARD VALUES - Config. 3, Dual Terminator, R1/R2 : 220/270 220/330 330/390 .2W DERATING 10Ω to 3M in E-24 values (preferred values in bold type)10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, 91 160/260 162/260 180/390 ← .100 ± .01 [2.54 ± .25] * Reduce wattage ratings by 1/3 for Opt.S **Config. 7 n/a in CL Series MSB OUT STANDARD VALUES- Config. 1, 2, 4, 5, 6: 81/130 120/195 121/195 ↑ .102 [2.6] Min. ↓ SINGLE RESISTOR PACKAGE POWER RATING* POWER RATING* RCD Type Config. Config. Config. 4-Pin 6-Pin 7-Pin 8-Pin 9-Pin 10-Pin 12-Pin 1,3,4,5,6 2 3, 7 C .3W .5W .17W 1W 1.5W 1.75W 2W 2.25W 2.5W 3W Config. No. 7 R/2R vvv vvv vvv vvv vvv > > > → ← → % OF RATED POWER Configuration No. 3 25 50 75 100 125 AMBIENT TEMPERATURE (°C) 150 80 60 40 20 0 40 80 120 160 200 240 AMBIENT TEMPERATURE (°C) TYPICAL PERFORMANCE SPECIFICATIONS Tolerance Temperature Coefficient TCR Tracking Operating Temperature Max. Working Voltage Short Time Overload Resis. to Solder Heat Moisture Resistance Terminal Strength Thermal Shock Load Life (1000 hours) Temperature Cycling Shock and Vibration Lead Solderability Marking Terminals 2% Standard (1%, 5% avail.) ±100ppm typ (±250ppm <50Ω & >2.2M) 50PPM typical -55°C to +125°C (+200°C Opt.V) 200V Series C, 100V Series CL & Opt.S ±0.5% (2.5x rated V, 5S, nte 2xW) ±0.25% (350°C, 5S) ±1% ±0.25% ±0.5% ±1.0% ±0.5% ±0.25% Meets MIL-R-83401 Pin #1 ID, resis value, & tol as minimum Solder plated steel typ., copper alloy* avail. * RCD recommends use of copper alloy terminals (opt. C) in aqueous cleaning systems RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:[email protected] FA032B Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 38