ETC2 OC-32B-5027AT 3.2x2.5x1.2mm / smd / hcmos/ttl oscillator Datasheet

OC-32 Series
Lead-Free
RoHS Compliant
3.2X2.5X1.2mm / SMD / HCMOS/TTL Oscillator
PART NUMBERING GUIDE
C A L I B E R
Electronics Inc.
Environmental/Mechanical Specifications on page F5
OC-32A- 100 48 A T - 30.000MHz
Package
OC-32
= 3.3Vdc
OC-32A = 1.8Vdc
OC-32B = 2.5Vdc
Pin One Connection
T = Tri State Enable High
Output Symmetry
Blank = 40/60%, A = 45/55%
Operating Temperature Range
Blank = -10°C to 70°C, 27 = -20°C to 70°C, 48 = -40°C to 85°C
Inclusive Stability
100= +/-100ppm, 50= +/-50ppm, 30= +/-30ppm, 25= +/-25ppm,
20= +/-20ppm
ELECTRICAL SPECIFICATIONS
Revision: 2006-C
Frequency Range
1.544MHz to 80.000MHz / 32.768kHz (@ 3.3V)
Operating Temperature Range
-10°C to 70°C / -20°C to 70°C / -40°C to 85°C
Storage Temperature Range
-55°C to 125°C
A=1.8Vdc / B=2.5Vdc / BLANK=3.3Vdc ±10%
Supply Voltage
Input Current
1.544MHz to 32.000MHz and 32.768kHz
36,001MHz to 70.000MHz
70.001MHz to 125.000MHz
2mA Maximum
3mA Maximum
4mA Maximum
(3.3v, 2.5v, 1.8v)
(3.3v, 2.5v, 1.8v)
(3.3v, 2.5v, 1.8v)
Frequency Tolerance / Stability
Inclusive of Operating Temperature Range, Supply
Voltage and Load
±100ppm, ±50ppm, ±30ppm, ±25ppm, ±20ppm,
(±50ppm for 32.768kHz only)
Output Voltage Logic High (Voh)
w/HCMOS or TTL Load
90% of Vdd Min. / Ioh=-8mA
Output Voltage Logic Low (Vol)
wHCMOS or TTL Load
10% of Vdd Max. / Iol=8mA
Rise / Fall Time
10% to 90% of Waveform w/HCMOS Load; 0.4Vdc to 2.4V w/TTL Load / 6nSec Max.
Duty Cycle
@1.4Vdc w/TTL Load; @50% w/HCMOS Load
@1.4Vdc w/TTL Load or w/HCMOS Load
50 ±10% (Standard)
50±5% (Optional)
Load Drive Capability
15pF HCMOS Load
Pin 1 Tristate Function
Pin 1 = H or Open / Output Active at pin 3
Pin 1 = L / High Impedance at pin 3
Aging (@ 25°C)
±5ppm / year Maximum
Start Up Time
10mSeconds Maximum
Absolute Clock Jitter
±250pSeconds Maximum
One Sigma Clock Jitter
±50pSeconds Maximum
NOTE: A 0.01uF bypass capacitor should be placed between Vdd (Pin 4) and GND (Pin 2) to minimize power supply line noise.
MECHANICAL DIMENSIONS
Marking Guide
Recommended Solder Pattern
All Dimensions in mm.
Metal
2.5
± 0.15
0.95
0.9
±0.2
X4
4
(X4 plcs.)
1.20
2.20
±0.15
3.2
X4
± 0.15
2.2
3
Ceramic
1.75
1.2
Max
Pin 1: Tri-State
Pin 2: Case Ground
TEL 949-366-8700
FAX 949-366-8707
Line 1: A, B or Blank - Frequency
Line 2: CEI YM
1
2
A = Voltage designator
CEI = Caliber Electronics Inc.
YM = Date Code (Year / Month)
1.00±
0.15
Pin 3: Output
Pin 4: Supply Voltage (3.3v, 2.5v, 1.8v)
WEB http://www.caliberelectronics.com
Similar pages