Voice: 800.729.2099 Fax: 678.560.9304 ICE Components, Inc. [email protected] www.icecomponents.com LP07 Series SMT High Current Inductors Features Applications • • • • • AC/DC and DC/DC Converters • Servers/Workstations • Telecom Switches • Voltage Regulator Modules Low cost design Saturation current rating up to 85A Low DCR Suitable for pick and place applications Packaging: Reel Diameter: 13”, Reel Width: 24mm, Pieces/reel: 350 Recommended PCB layout Mechanical 6.5 max A S 2.5 4.6 LP07-XXX YYWW Schematic 13.0 max F 6.5 A= LP07-181: 15.3mm max LP07-451 ~ 801: 15.0mm max LP07-142 ~ 392: 14.5mm max unit: mm Electrical Specifications Part Number LP07-181 LP07-451 LP07-801 LP07-142 LP07-202 LP07-282 LP07-392 Inductance1 DCR DCR (µH,nom.) (m , typ) (m ,max) 0.18 0.45 0.80 1.40 2.00 2.80 3.90 0.32 0.69 1.20 1.90 2.60 3.90 4.50 Specifications subject to change without notice. 0.45 0.90 1.40 2.20 3.00 4.30 5.25 Isat5 (A) Idc6 (A) 85 53 36 28 24 20 16 45 40 31 26 21 17 16 1. Tested at 100kHz, 0.1Vrms. 2. Electrical specifications at 25°C. 3. Operating range: -40°C to +130°C. This is a combination of ambient plus temperature rise. 4. Meets UL 94V-0. 5. Isat is the DC current required to reduce to nominal inductance by 20% at an ambient temperature of 25°C. 6. Idc is the DC current required to produce a temperature rise of 40°C at an ambient temperature of 25°C. 7. Inductance tolerance is +/-20%. 8. For Lead Free components, please add “-LF” as suffix. (03/07) LP07-1