CLV1225A-LF PHASE NOISE (1 Hz BW, typical) Rev B2 Voltage-Controlled Oscillator Surface Mount Module Applications • Digital Radios • Satellite Communications • Basestations £(f) (dBc/Hz) 14118 Stowe Drive, Suite B Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 1180 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -109 Harmonic Suppression (2nd) -25 Tuning Voltage 0.5 Max Units 1270 MHz dBc/Hz -16 dBc 4.5 Vdc MHz/V 37 Tuning Sensitivity (avg.) 6 dBm Input Capacitance 50 pF Pushing 1 MHz/V Pulling (14 dB Return Loss, Any Phase) 1 MHz 85 °C Max Units Power Output -1 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 2.5 MINI-14S-L Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 26 Vdc 31 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module CLV1225A-LF Rev B2 Tuning Curve, typ. 1330 FREQUENCY (MHz) 1310 1290 1270 1250 1210 85 °C 25 °C 1190 -40 °C 1230 1170 1150 1130 1110 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 8 7 6 5 4 3 0.030 MIN. CUTBACK FROM LIVE PADS 2 1 0 -1 -2 1131 1156 1177 1197 1217 1236 1256 1275 1295 1315 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B