LINER LT6654 Sot-23 precision wide supply high output drive low noise reference Datasheet

LT6654
SOT-23 Precision Wide
Supply High Output Drive
Low Noise Reference
DESCRIPTION
FEATURES
n
n
n
n
n
n
n
n
n
n
n
n
n
Low Drift:
A-Grade: 10ppm/°C Max
B-Grade: 20ppm/°C Max
High Accuracy:
A-Grade: ±0.05% Max
B-Grade: ±0.10% Max
Low Noise: 1.6ppmP-P (0.1Hz to 10Hz)
Wide Supply Range to 36V
Low Thermal Hysteresis: LS8 15ppm (–40°C to 125°C)
Long Term Drift: (LS8) 15ppm/√kHr
Line Regulation (Up to 36V): 5ppm/V Max
Low Dropout Voltage: 100mV Max
Sinks and Sources ±10mA
Load Regulation at 10mA: 8ppm/mA Max
Fully Speciﬁed from –55°C to 125°C
Available Output Voltage Options: 1.25V, 2.048V, 2.5V,
3V, 3.3V, 4.096V, 5V
Low Proﬁle (1mm) ThinSOT™ Package and 5mm ×
5mm Surface Mount Hermetic Package
APPLICATIONS
n
n
n
n
n
n
Automotive Control and Monitoring
High Temperature Industrial
High Resolution Data Acquisition Systems
Instrumentation and Process Control
Precision Regulators
Medical Equipment
The LT®6654 is a family of small precision voltage references that offers high accuracy, low noise, low drift,
low dropout and low power. The LT6654 operates from
voltages up to 36V and is fully speciﬁed from –55°C to
125°C. A buffered output ensures ±10mA of output drive
with low output impedance and precise load regulation.
These features, in combination, make the LT6654 ideal
for portable equipment, industrial sensing and control,
and automotive applications.
The LT6654 was designed with advanced manufacturing techniques and curvature compensation to provide
10ppm/°C temperature drift and 0.05% initial accuracy.
Low thermal hysteresis ensures high accuracy and
1.6ppmP-P noise minimizes measurement uncertainty.
Since the LT6654 can also sink current, it can operate
as a low power negative voltage reference with the same
precision as a positive reference.
The LT6654 references are offered in 6-lead SOT-23
package and an 8-lead LS8 package. The LS8 is a 5mm
× 5mm surface mount hermetic package that provides
outstanding stability.
L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks and
ThinSOT is a trademark of Linear Technology Corporation. All other trademarks are the property
of their respective owners.
TYPICAL APPLICATION
Output Voltage Temperature Drift
Basic Connection
4
CIN
0.1μF
6
LT6654
1
2
VOUT
CL
1μF
6654 TA01a
VOUT ACCURACY (%)
(VOUT + 0.5V) < VIN < 36V
0.10
3 TYPICAL PARTS
LT6654-2.5
0.05
0.00
–0.05
–0.10
–60 –40 –20 0 20 40 60 80 100 120 140
TEMPERATURE (°C)
6654 TA01b
6654fc
1
LT6654
ABSOLUTE MAXIMUM RATINGS
(Note 1)
Input Voltage VIN to GND ........................... –0.3V to 38V
Output Voltage VOUT .........................–0.3V to VIN + 0.3V
Output Short-Circuit Duration ......................... Indeﬁnite
Speciﬁed Temperature Range
H-Grade ............................................. –40°C to 125°C
MP-Grade .......................................... –55°C to 125°C
Operating Temperature Range................ –55°C to 125°C
Storage Temperature Range (Note 2)..... –65°C to 150°C
Lead Temperature (Soldering, 10 sec.)
(Note 9)................................................................. 300°C
PIN CONFIGURATION
TOP VIEW
VIN
TOP VIEW
GND* 1
6 VOUT
DNC
1
GND 2
5 DNC
GND*
2
DNC 3
4 VIN
GND
3
S6 PACKAGE
6-LEAD PLASTIC TSOT-23
TJMAX = 150°C, θJA = 192°C/W
DNC: CONNECTED INTERNALLY
DO NOT CONNECT EXTERNAL
CIRCUITRY TO THESE PINS
*CONNECT PIN TO DEVICE GND (PIN 2)
8
4
7
DNC
6
VOUT
5
VOUT
GND*
LS8 PACKAGE
8-PIN LEADLESS CHIP CARRIER (5mm × 5mm)
TJMAX = 150°C, θJA = 125°C/W
DNC: CONNECTED INTERNALLY
DO NOT CONNECT EXTERNAL
CIRCUITRY TO THESE PINS
*CONNECT PIN TO DEVICE GND (PIN 3)
6654fc
2
LT6654
ORDER INFORMATION
Lead Free Finish
TAPE AND REEL (MINI)
TAPE AND REEL
PART MARKING* PACKAGE DESCRIPTION
LT6654AHS6-1.25#TRMPBF
LT6654AHS6-1.25#TRPBF
LTFVD
6-Lead Plastic TSOT-23
LT6654BHS6-1.25#TRMPBF
LT6654BHS6-1.25#TRPBF
LTFVD
6-Lead Plastic TSOT-23
LT6654AMPS6-1.25#TRMPBF
LT6654AMPS6-1.25#TRPBF
LTFVD
6-Lead Plastic TSOT-23
LT6654BMPS6-1.25#TRMPBF
LT6654BMPS6-1.25#TRPBF
LTFVD
6-Lead Plastic TSOT-23
LT6654AHS6-2.048#TRMPBF
LT6654AHS6-2.048#TRPBF
LTFVF
6-Lead Plastic TSOT-23
LT6654BHS6-2.048#TRMPBF
LT6654BHS6-2.048#TRPBF
LTFVF
6-Lead Plastic TSOT-23
LT6654AMPS6-2.048#TRMPBF LT6654AMPS6-2.048#TRPBF LTFVF
6-Lead Plastic TSOT-23
LT6654BMPS6-2.048#TRMPBF LT6654BMPS6-2.048#TRPBF LTFVF
6-Lead Plastic TSOT-23
LT6654AHS6-2.5#TRMPBF
LT6654AHS6-2.5#TRPBF
LTFJY
6-Lead Plastic TSOT-23
LT6654BHS6-2.5#TRMPBF
LT6654BHS6-2.5#TRPBF
LTFJY
6-Lead Plastic TSOT-23
LT6654AMPS6-2.5#TRMPBF
LT6654AMPS6-2.5#TRPBF
LTFJY
6-Lead Plastic TSOT-23
LT6654BMPS6-2.5#TRMPBF
LT6654BMPS6-2.5#TRPBF
LTFJY
6-Lead Plastic TSOT-23
LT6654AHS6-3#TRMPBF
LT6654AHS6-3#TRPBF
LTFVG
6-Lead Plastic TSOT-23
LT6654BHS6-3#TRMPBF
LT6654BHS6-3#TRPBF
LTFVG
6-Lead Plastic TSOT-23
LT6654AMPS6-3#TRMPBF
LT6654AMPS6-3#TRPBF
LTFVG
6-Lead Plastic TSOT-23
LT6654BMPS6-3#TRMPBF
LT6654BMPS6-3#TRPBF
LTFVG
6-Lead Plastic TSOT-23
LT6654AHS6-3.3#TRMPBF
LT6654AHS6-3.3#TRPBF
LTFVH
6-Lead Plastic TSOT-23
LT6654BHS6-3.3#TRMPBF
LT6654BHS6-3.3#TRPBF
LTFVH
6-Lead Plastic TSOT-23
LT6654AMPS6-3.3#TRMPBF
LT6654AMPS6-3.3#TRPBF
LTFVH
6-Lead Plastic TSOT-23
LT6654BMPS6-3.3#TRMPBF
LT6654BMPS6-3.3#TRPBF
LTFVH
6-Lead Plastic TSOT-23
LT6654AHS6-4.096#TRMPBF
LT6654AHS6-4.096#TRPBF
LTFVJ
6-Lead Plastic TSOT-23
LT6654BHS6-4.096#TRMPBF
LT6654BHS6-4.096#TRPBF
LTFVJ
6-Lead Plastic TSOT-23
LT6654AMPS6-4.096#TRMPBF LT6654AMPS6-4.096#TRPBF LTFVJ
6-Lead Plastic TSOT-23
LT6654BMPS6-4.096#TRMPBF LT6654BMPS6-4.096#TRPBF LTFVJ
6-Lead Plastic TSOT-23
LT6654AHS6-5#TRMPBF
LT6654AHS6-5#TRPBF
LTFVK
6-Lead Plastic TSOT-23
LT6654BHS6-5#TRMPBF
LT6654BHS6-5#TRPBF
LTFVK
6-Lead Plastic TSOT-23
LT6654AMPS6-5#TRMPBF
LT6654AMPS6-5#TRPBF
LTFVK
6-Lead Plastic TSOT-23
LT6654BMPS6-5#TRMPBF
LT6654BMPS6-5#TRPBF
LTFVK
6-Lead Plastic TSOT-23
LEAD FREE FINISH
PART MARKING*
PACKAGE DESCRIPTION
665425
8-Lead Ceramic LCC (5mm × 5mm)
LT6654AHLS8-2.5#PBF †
665425
8-Lead Ceramic LCC (5mm × 5mm)
LT6654BHLS8-2.5#PBF †
TRM = 500 pieces. *Temperature grades are identiﬁed by a label on the shipping container.
Consult LTC Marketing for parts speciﬁed with wider operating temperature ranges.
Consult LTC Marketing for information on lead based ﬁnish parts.
For more information on lead free part marking, go to: http://www.linear.com/leadfree/
For more information on tape and reel speciﬁcations, go to: http://www.linear.com/tapeandreel/
† This product is only offered in trays. For more information go to: http://www.linear.com/packaging/
SPECIFIED TEMPERATURE RANGE
–40°C to 125°C
–40°C to 125°C
–55°C to 125°C
–55°C to 125°C
–40°C to 125°C
–40°C to 125°C
–55°C to 125°C
–55°C to 125°C
–40°C to 125°C
–40°C to 125°C
–55°C to 125°C
–55°C to 125°C
–40°C to 125°C
–40°C to 125°C
–55°C to 125°C
–55°C to 125°C
–40°C to 125°C
–40°C to 125°C
–55°C to 125°C
–55°C to 125°C
–40°C to 125°C
–40°C to 125°C
–55°C to 125°C
–55°C to 125°C
–40°C to 125°C
–40°C to 125°C
–55°C to 125°C
–55°C to 125°C
SPECIFIED TEMPERATURE RANGE
–40°C to 125°C
–40°C to 125°C
6654fc
3
LT6654
AVAILABLE OPTIONS
OUTPUT VOLTAGE
1.25V
INITIAL ACCURACY
TEMPERATURE COEFFICIENT
0.05%
10ppm/°C
0.1%
20ppm/°C
0.05%
10ppm/°C
0.1%
20ppm/°C
2.048V
0.05%
10ppm/°C
0.1%
20ppm/°C
0.05%
10ppm/°C
0.1%
20ppm/°C
10ppm/°C
2.5V
0.05%
10ppm/°C
0.05%
20ppm/°C
0.1%
20ppm/°C
0.1%
10ppm/°C
0.05%
20ppm/°C
0.1%
3V
0.05%
10ppm/°C
0.1%
20ppm/°C
0.05%
10ppm/°C
0.1%
20ppm/°C
3.3V
0.05%
10ppm/°C
0.1%
20ppm/°C
0.05%
10ppm/°C
0.1%
20ppm/°C
4.096V
0.05%
10ppm/°C
0.1%
20ppm/°C
0.05%
10ppm/°C
0.1%
20ppm/°C
10ppm/°C
5V
0.05%
20ppm/°C
0.1%
10ppm/°C
0.05%
20ppm/°C
0.1%
** See the Order Information section for complete part number listing.
ORDER PART NUMBER**
LT6654AHS6-1.25
LT6654BHS6-1.25
LT6654AMPS6-1.25
LT6654BMPS6-1.25
LT6654AHS6-2.048
LT6654BHS6-2.048
LT6654AMPS6-2.048
LT6654BMPS6-2.048
LT6654AHS6-2.5
LT6654AHLS8-2.5
LT6654BHS6-2.5
LT6654BHLS8-2.5
LT6654AMPS6-2.5
LT6654BMPS6-2.5
LT6654AHS6-3
LT6654BHS6-3
LT6654AMPS6-3
LT6654BMPS6-3
LT6654AHS6-3.3
LT6654BHS6-3.3
LT6654AMPS6-3.3
LT6654BMPS6-3.3
LT6654AHS6-4.096
LT6654BHS6-4.096
LT6654AMPS6-4.096
LT6654BMPS6-4.096
LT6654AHS6-5
LT6654BHS6-5
LT6654AMPS6-5
LT6654BMPS6-5
SPECIFIED TEMPERATURE RANGE
–40°C to 125°C
–40°C to 125°C
–55°C to 125°C
–55°C to 125°C
–40°C to 125°C
–40°C to 125°C
–55°C to 125°C
–55°C to 125°C
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
–55°C to 125°C
–55°C to 125°C
–40°C to 125°C
–40°C to 125°C
–55°C to 125°C
–55°C to 125°C
–40°C to 125°C
–40°C to 125°C
–55°C to 125°C
–55°C to 125°C
–40°C to 125°C
–40°C to 125°C
–55°C to 125°C
–55°C to 125°C
–40°C to 125°C
–40°C to 125°C
–55°C to 125°C
–55°C to 125°C
6654fc
4
LT6654
ELECTRICAL CHARACTERISTICS
The l denotes the speciﬁcations which apply over the full operating
temperature range, otherwise speciﬁcations are at TA = 25°C, CL = 1μF and VIN = VOUT + 0.5V, unless otherwise noted.
For LT6654-1.25, VIN = 2.4V, unless otherwise noted.
PARAMETER
CONDITIONS
MIN
Output Voltage Accuracy
LT6654A
LT6654B
LT6654AH
LT6654BH
LT6654AMP
LT6654BMP
l
l
l
l
–0.05
–0.10
–0.215
–0.43
–0.23
–0.46
Output Voltage Temperature Coefﬁcient (Note 3)
LT6654A
LT6654B
l
l
Line Regulation
VOUT + 0.5V ≤ VIN ≤ 36V
LT6654-2.048, LT6654-2.5, LT6654-3,
LT6654-3.3, LT6654-4.096, LT6654-5
l
2.4V ≤ VIN ≤ 36V
LT6654-1.25
l
Load Regulation (Note 4)
IOUT(SOURCE) = 10mA
LT6654-2.048, LT6654-2.5, LT6654-3,
LT6654-3.3, LT6654-4.096, LT6654-5
LT6654-1.25
LT6654LS8
Load Regulation (Note 4)
IOUT(SINK) = 10mA
LT6654-2.048, LT6654-2.5, LT6654-3,
LT6654-3.3, LT6654-4.096, LT6654-5
LT6654-1.25
LT6654LS8
Dropout Voltage (Note 5)
Minimum Input Voltage
VIN – VOUT , ΔVOUT = 0.1%
IOUT = 0mA
LT6654-2.048, LT6654-2.5, LT6654-3,
LT6654-3.3, LT6654-4.096, LT6654-5
IOUT(SOURCE) = 10mA
IOUT(SINK) = –10mA
LT6654-1.25, ΔVOUT = 0.1%, IOUT = 0mA
LT6654-1.25, ΔVOUT = 0.1%, IOUT = ±10mA
Supply Current
No Load
l
l
l
l
l
l
l
TYP
l
UNITS
0.05
0.10
0.215
0.43
0.23
0.46
%
%
%
%
%
%
3
10
10
20
ppm/°C
ppm/°C
1.2
5
10
ppm/V
ppm/V
1.2
5
10
ppm/V
ppm/V
3
8
15
15
20
30
45
ppm/mA
ppm/mA
ppm/mA
ppm/mA
ppm/mA
ppm/mA
20
30
25
30
60
90
ppm/mA
ppm/mA
ppm/mA
ppm/mA
ppm/mA
ppm/mA
100
120
mV
mV
450
50
mV
mV
1.6
1.8
2.4
V
V
V
600
μA
μA
6
10
9
15
30
55
l
l
l
l
MAX
1.5
350
Output Short-Circuit Current
Short VOUT to GND
Short VOUT to VIN
40
30
mA
mA
Output Voltage Noise (Note 6)
0.1Hz ≤ f ≤ 10Hz
LT6654-1.25
LT6654-2.048
LT6654-2.5
LT6654-3
LT6654-3.3
LT6654-4.096
LT6654-5
10Hz ≤ f ≤ 1kHz
0.8
1.0
1.5
1.6
1.7
2.0
2.2
2.0
ppmP-P
ppmP-P
ppmP-P
ppmP-P
ppmP-P
ppmP-P
ppmP-P
ppmRMS
0.1% Settling, CLOAD = 1μF
150
μs
Turn-On Time
6654fc
5
LT6654
ELECTRICAL CHARACTERISTICS
The l denotes the speciﬁcations which apply over the full operating
temperature range, otherwise speciﬁcations are at TA = 25°C, CL = 1μF and VIN = VOUT + 0.5V, unless otherwise noted.
For LT6654-1.25, VIN = 2.4V, unless otherwise noted.
PARAMETER
CONDITIONS
Long-Term Drift of Output Voltage (Note 7)
LT6654S6
LT6654LS8
Hysteresis (Note 8)
S6
ΔT = 0°C to 70°C
ΔT = –40°C to 85°C
ΔT = –40°C to 125°C
ΔT = –55°C to 125°C
LS8
ΔT = 0°C to 70°C
ΔT = –40°C to 85°C
ΔT = –40°C to 125°C
ΔT = –55°C to 125°C
Note 1: Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to any Absolute
Maximum Rating condition for extended periods may affect device
reliability and lifetime.
Note 2: If the parts are stored outside of the speciﬁed temperature range,
the output may shift due to hysteresis.
Note 3: Temperature coefﬁcient is measured by dividing the maximum
change in output voltage by the speciﬁed temperature range.
Note 4: Load regulation is measured on a pulse basis from no load to the
speciﬁed load current. Output changes due to die temperature change
must be taken into account separately.
Note 5: Excludes load regulation errors.
Note 6: Peak-to-peak noise is measured with a 1-pole highpass ﬁlter at
0.1Hz and 2-pole lowpass ﬁlter at 10Hz. The unit is enclosed in a still-air
environment to eliminate thermocouple effects on the leads. The test
time is 10 seconds. RMS noise is measured on a spectrum analyzer in
a shielded environment where the intrinsic noise of the instrument is
removed to determine the actual noise of the device.
MIN
TYP
MAX
UNITS
60
15
ppm/√kHr
ppm/√kHr
15
30
40
50
ppm
ppm
ppm
ppm
3
11
15
20
ppm
ppm
ppm
ppm
Note 7: Long-term stability typically has a logarithmic characteristic
and therefore, changes after 1000 hours tend to be much smaller than
before that time. Total drift in the second thousand hours is normally less
than one third that of the ﬁrst thousand hours with a continuing trend
toward reduced drift with time. Long-term stability will also be affected by
differential stresses between the IC and the board material created during
board assembly.
Note 8: Hysteresis in output voltage is created by package stress that
differs depending on whether the IC was previously at a higher or
lower temperature. Output voltage is always measured at 25°C, but
the IC is cycled to the hot or cold temperature limit before successive
measurements. Hysteresis measures the maximum output change for the
averages of three hot or cold temperature cycles. For instruments that
are stored at well controlled temperatures (within 20 or 30 degrees of
operational temperature), it is usually not a dominant error source. Typical
hysteresis is the worst-case of 25°C to cold to 25°C or 25°C to hot to
25°C, preconditioned by one thermal cycle.
Note 9: The stated temperature is typical for soldering of the leads during
manual rework. For detailed IR reﬂow recommendations, refer to the
Applications Information section.
6654fc
6
LT6654
TYPICAL PERFORMANCE CHARACTERISTICS
The characteristic curves are similar across the
LT6654 family. Curves from the LT6654-1.25, LT6654-2.5 and the LT6654-5 represent the full range of typical performance of all
voltage options. Characteristic curves for other output voltages fall between these curves and can be estimated based on their output.
1.25V Output Voltage
Temperature Drift
1.2520
1.25V Output Impedance
vs Frequency
1.25V Turn-On Characteristics
100
THREE TYPICAL PARTS
1.2510
OUTPUT IMPEDANCE (Ω)
REFERENCE VOLTAGE (V)
1.2515
VIN
1V/DIV
1.2505
GND
1.2500
1.2495
VOUT
0.5V/DIV
1.2490
GND
1.2485
–60 –40 –20 0 20 40 60 80 100 120 140
TEMPERATURE (°C)
CLOAD = 1μF
CL = 1μF
1
CL = 10μF
0.1
0.01
0.1
6654 G02
20μs/DIV
10
1
1000
10
100
FREQUENCY (kHz)
6654 G03
6654 G01
1.25V Load Regulation (Sinking)
30
200
20
180
–40°C
10
0
–10
125°C
25°C
–20
–30
–40
125°C
160
140
120
100
25°C
80
60
40
–40°C
20
–50
0.1
–55°C
0
0.1
10
1
OUTPUT CURRENT (mA)
1.25V Output Noise 0.1Hz to 10Hz
OUTPUT NOISE (1μV/DIV)
–55°C
OUTPUT VOLTAGE CHANGE (ppm)
OUTPUT VOLTAGE CHANGE (ppm)
1.25V Load Regulation (Sourcing)
6654 G04
0
10
1
OUTPUT CURRENT (mA)
1
2
3
4 5 6 7
TIME (1s/DIV)
1.25V Minimum Input Voltage
(Sinking)
10
9
10
6654 G06
6654 G05
1.25V Minimum Input Voltage
(Sourcing)
8
1.2V Output Voltage Noise
Spectrum
10
400
350
25°C
–40°C
1
–55°C
125°C
NOISE VOLTAGE (nV√Hz)
125°C
OUTPUT CURRENT (mA)
OUTPUT CURRENT (mA)
25°C
–55°C
1
–40°C
300
250
200
150
IO = 0μA
100
IO = 5mA
50
0.1
0.1
1
1.2 1.4 1.6 1.8
2
2.2
MINIMUM INPUT VOLTAGE (V)
2.4
6654 G07
1
1.1
1.2 1.3 1.4 1.5 1.6 1.7
MINIMUM INPUT VOLTAGE (V)
1.8
6654 G08
0
0.01
0.1
1
10
FREQUENCY (kHz)
100
6654 G09
6654fc
7
LT6654
TYPICAL PERFORMANCE CHARACTERISTICS
The characteristic curves are similar across the
LT6654 family. Curves from the LT6654-1.25, LT6654-2.5 and the LT6654-5 represent the full range of typical performance of all
voltage options. Characteristic curves for other output voltages fall between these curves and can be estimated based on their output.
2.5V Output Voltage
Temperature Drift
2.5V Supply Current
vs Input Voltage
2.502
2.5V Line Regulation
600
THREE TYPICAL PARTS
2.5050
2.5040
–40°C
2.500
2.499
–55°C
400
2.5030
OUTPUT VOLTAGE (V)
2.501
INPUT CURRENT (μA)
OUTPUT VOLTAGE (V)
500
25°C
300
125°C
200
2.5020
2.5010
25°C
2.5000
2.4990
125°C
2.4980
–55°C
2.4970
100
–40°C
2.4960
2.498
–60
2.4950
0
–20
20
60
100
TEMPERATURE (°C)
140
0
5
10
15 20 25 30
INPUT VOLTAGE (V)
35
6654 G10
2.5V Load Regulation (Sourcing)
5
10
15 20 25 30
INPUT VOLTAGE (V)
40
35
6654 G12
2.5V Load Regulation (Sinking)
2.5V Output Noise 0.1Hz to 10Hz
180
–40°C
–10
125°C
25°C
–20
–30
160
140
120
100
125°C
80
25°C
60
40
–40°C
20
–40
0.1
1
OUTPUT CURRENT (mA)
OUTPUT NOISE (1μV/DIV)
–55°C
0
OUTPUT VOLTAGE CHANGE (ppm)
–55°C
0
0.1
10
10
1
OUTPUT CURRENT (mA)
6654 G14
6654 G13
2.5V Minimum VIN to VOUT
Differential (Sourcing)
2.5V Minimum VIN to VOUT
Differential (Sinking)
10
2.5V Output Voltage Noise
Spectrum
10
–55°C
6654 G15
TIME (1s/DIV)
400
25°C
350
OUTPUT CURRENT (mA)
–40°C
125°C
1
–55°C
NOISE VOLTAGE (nV√Hz)
OUTPUT VOLTAGE CHANGE (ppm)
0
6654 G11
10
OUTPUT CURRENT (mA)
40
–40°C
125°C
25°C
1
300
250
IO = 0μA
200
150
IO = 5mA
100
50
0.1
0
50
100 150 200 250 300 350 400
INPUT-OUTPUT VOLTAGE (mV)
6654 G16
0.1
50
–300 –250 –200 –150 –100 –50 0
INPUT-OUTPUT VOLTAGE (mV)
100
6654 G17
0
0.01
0.1
1
10
FREQUENCY (kHz)
100
6654 G18
6654fc
8
LT6654
TYPICAL PERFORMANCE CHARACTERISTICS
The characteristic curves are similar across the
LT6654 family. Curves from the LT6654-1.25, LT6654-2.5 and the LT6654-5 represent the full range of typical performance of all
voltage options. Characteristic curves for other output voltages fall between these curves and can be estimated based on their output.
2.5V Integrated Noise
10Hz to 10kHz
2.5V Power Supply Rejection
Ratio vs Frequency
–20
10
1
0.1
0.01
–30
–40
CL = 1μF
–50
–60
–70
CL = 10μF
–80
10
CL = 1μF
1
CL = 10μF
–90
–100
0.1
10
0.1
1
FREQUENCY (kHz)
100
OUTPUT IMPEDANCE (Ω)
POWER SUPPLY REJECTION RATIO (dB)
INTEGRATED NOISE (μVRMS)
100
2.5V Output Impedance
vs Frequency
1
6654 G19
0.1
1000
10
100
FREQUENCY (kHz)
1
6654 G20
2.5V Turn-On Characteristics
1000
10
100
FREQUENCY (kHz)
6654 G21
2.5V Load Transient Response
(Sourcing)
2.5V Line Transient Response
VIN
0.5V/DIV
3V/DC
IOUT
0mA
VIN
1V/DIV
5mA
GND
VOUT
2mV/DIV/AC
2.5V/DC
VOUT
1V/DIV
VOUT
20mV/DIV/AC
2.5V/DC
GND
20μs/DIV
6654 G22
CLOAD = 1μF
2.5V Hysteresis Plot for –40°C
and 125°C (TSOT-23)
36
NUMBER OF UNITS
150
MAX AVG HOT CYCLE MAX AVG COLD CYCLE
25°C TO 125°C TO 25°C 25°C TO –40°C TO 25°C
40
32
28
24
20
16
12
8
6
60
30
0
–30
–60
–90
0
–150 –125 –100 –75 –50 –25 0 25 50 75 100 125 150
DISTRIBUTION (ppm)
–150
25°C TO –40°C TO 25°C
AND 25°C TO 125°C TO 25°C
5
90
–120
6654 G24
50μs/DIV
2.5V Hysteresis Plot for –40°C
and 125°C (LS8)
TA = 35°C
120
4
6654 G25
CLOAD = 1μF
2.5V Long Term Drift (TSOT-23)
OUTPUT VOLTAGE CHANGE (ppm)
48
44
6654 G23
50μs/DIV
NUMBER OF UNITS
CLOAD = 1μF
4
3
2
1
0
400
800
1200
TIME (HOURS)
1600
2000
6654 G26
0
–40 –30 –20 –10 0
10 20
DISTRIBUTION (ppm)
30
40
6654 G37
6654fc
9
LT6654
TYPICAL PERFORMANCE CHARACTERISTICS
The characteristic curves are similar across the
LT6654 family. Curves from the LT6654-1.25, LT6654-2.5 and the LT6654-5 represent the full range of typical performance of all
voltage options. Characteristic curves for other output voltages fall between these curves and can be estimated based on their output.
2.5V Load Transient Response
(Sinking)
2.5V Long Term Drift (LS8)
5V Output Voltage Temperature
Drift
150
5.003
120
5.002
REFERENCE VOLTAGE (V)
IOUT
5mA
90
60
0mA
PPM
30
0
–30
VOUT
20mV/DIV/AC
2.5V/DC
–60
–90
5.001
5.000
4.999
4.998
4.997
4.996
4.995
–120
–150
THREE TYPICAL PARTS
4.994
0
500
1500
1000
TIME (HOURS)
2000
6654 G27
50μs/DIV
CLOAD = 1μF
4.993
–60 –40 –20 0 20 40 60 80 100 120 140
TEMPERATURE (°C)
6654 G38
6654 G28
5V Output Impedance
vs Frequency
5V Turn-On Characteristics
5V Load Regulation (Sourcing)
100
VIN
2V/DIV
GND
VOUT
2V/DIV
OUTPUT VOLTAGE CHANGE (ppm)
OUTPUT IMPEDANCE (Ω)
50
10
CL = 1μF
1
CL = 10μF
0.1
GND
CLOAD = 1μF
6654 G29
50μs/DIV
0.01
0.1
1
1000
10
100
FREQUENCY (kHz)
40
30
20
–55°C
–40°C
10
125°C
0
25°C
–10
–20
0.1
1
OUTPUT CURRENT (mA)
6654 G30
10
6654 G31
5V Load Regulation (Sinking)
5V Minimum VIN to VOUT
Differential (Sourcing)
5V Output Noise 0.1Hz to 10Hz
10
220
–55°C
180
160
140
120
100
80
60
–55°C
–40°C
125°C
25°C
OUTPUT CURRENT (mA)
OUTPUT NOISE (4μV/DIV)
OUTPUT VOLTAGE CHANGE (ppm)
200
25°C
–40°C
125°C
1
40
20
0
0.1
1
OUTPUT CURRENT (mA)
10
6654 G32
0
1
2
3
4 5 6 7
TIME (1s/DIV)
8
9
10
6654 G33
0.1
0
50
100 150 200 250 300 350 400
INPUT-OUTPUT VOLTAGE (mV)
6654 G34
6654fc
10
LT6654
TYPICAL PERFORMANCE CHARACTERISTICS
The characteristic curves are similar across the
LT6654 family. Curves from the LT6654-1.25, LT6654-2.5 and the LT6654-5 represent the full range of typical performance of all
voltage options. Characteristic curves for other output voltages fall between these curves and can be estimated based on their output.
5V Minimum VIN to VOUT
Differential (Sinking)
5V Output Voltage Noise
Spectrum
10
600
500
–55°C
NOISE VOLTAGE (nV√Hz)
OUTPUT CURRENT (mA)
550
25°C
125°C
–40°C
1
IO = 0μA
450
400
350
300
250
IO = 5mA
200
150
100
50
0.1
–300 –250 –200 –150 –100 –50 0
50
INPUT-OUTPUT VOLTAGE (mV)
0
0.01
100
0.1
1
10
FREQUENCY (kHz)
100
6654 G36
6654 G35
PIN FUNCTIONS
(LS8)
(TSOT)
DNC (Pins 1, 7): Do Not Connect. Keep leakage current
from this pin to VIN or GND to a minimum.
GND (Pin 1): Internal Function. This pin must be tied to
ground, near Pin 2.
GND (Pin 2): Tie To Pin 3 For Proper Load Regulation.
GND (Pin 2): Primary Device Ground.
GND (Pin 3): Primary Device Ground. This pin is the main
ground and should be connected in a star conﬁguration
for best results. In a star conﬁguration, this pin should
be connected to the ground plane and each additional
ground connection should be made with a single trace that
emanates from this ground connection. These additional
ground connections include Pin 2, Pin 4 of the LTC6654,
and the ground for the load and bypass capacitors.
DNC (Pin 3): Do Not Connect. Keep leakage current from
this pin to VIN or GND to a minimum.
GND (Pin 4): Internal Function. This pin must be tied to
GND, near pin 3.
VIN (Pin 4): Power Supply. Bypass VIN with a 0.1μF
capacitor to ground.
DNC (Pin 5): Do Not Connect. Keep leakage current from
this pin to VIN or GND to a minimum.
VOUT (Pin 6): Output Voltage. An output capacitor of 1μF
minimum is required for stable operation.
VOUT (Pin 5): VOUT Pin. An output capacitor of 1μF or
greater is required for stable operation.
VOUT (Pin 6): VOUT Pin. Tie to pin 5 for proper load regulation.
VIN (Pin 8): Power Supply. Bypass VIN with a 0.1μF, or
larger, capacitor to GND.
6654fc
11
LT6654
BLOCK DIAGRAMS
8
7
VIN
DNC
+
VOUT
BANDGAP
1
3
DNC
VOUT
–
GND
GND
6
4
GND
2
5
6654 BDa
LS8
4
3
VIN
DNC
+
VOUT
BANDGAP
5
2
DNC
6
–
GND
GND
1
6654 BD
SOT23
6654fc
12
LT6654
APPLICATIONS INFORMATION
Bypass and Load Capacitors
The LT6654 voltage references should have an input bypass capacitor of 0.1μF or larger, however the bypassing
on other components nearby is sufﬁcient. In high voltage
applications, VIN > 30V, an output short-circuit to ground
can create an input voltage transient that could exceed the
maximum input voltage rating. To prevent this worst-case
condition, an RC input line ﬁlter of 10μs (i.e. 10Ω and 1μF)
is recommended. These references also require an output
capacitor for stability. The optimum output capacitance for
most applications is 1μF, although larger values work as
well. This capacitor affects the turn-on and settling time
for the output to reach its ﬁnal value.
VIN
1V/DIV
GND
VOUT
1V/DIV
GND
CLOAD = 1μF
6654 F01
20μs/DIV
Figure 1. Turn-On Characteristics of LT6654-2.5
Figure 1 shows the turn-on time for the LT6654-2.5 with a
0.1μF input bypass and 1μF load capacitor. Figure 2 shows
the output response to a 0.5V transient on VIN with the
same capacitors.
VIN
0.5V/DIV
3V/DC
The test circuit of Figure 3 is used to measure the stability
with various load currents. With RL = 1k, the 1V step produces a current step of 1mA. Figure 4 shows the response
to a ± 0.5mA load. Figure 5 is the output response to a
sourcing step from 4mA to 5mA, and Figure 6 is the output
response of a sinking step from 4mA to 5mA.
VOUT
2mV/DIV/AC
2.5V/DC
6654 F02
50μs/DIV
CLOAD = 1μF
Figure 2. Output Response to 0.5V Ripple on VIN
VIN
3V
4
CIN
0.1μF
LT6654-2.5
1, 2
6
1k
CL
1μF
1V
VGEN
6654 F03
Figure 3. Load Current Response Time Test Circuit
6654fc
13
LT6654
APPLICATIONS INFORMATION
Positive or Negative Operation
IOUT
–0.5mA
In addition to the series connection, as shown on the front
page of this data sheet, the LT6654 can be operated as a
negative voltage reference.
0.5mA
VOUT
20mV/DIV/AC
2.5V/DC
CLOAD = 1μF
50μs/DIV
6654 F04
Figure 4. LT6654-2.5 Sourcing and Sinking 0.5mA
The circuit in Figure 7 shows an LT6654 conﬁgured for
negative operation. In this conﬁguration, a positive voltage is required at VIN (Pin 4) to bias the LT6654 internal
circuitry. This voltage must be current limited with R1 to
keep the output PNP transistor from turning on and driving the grounded output. C1 provides stability during load
transients. This connection maintains the same accuracy and
temperature coefﬁcient of the positive connected LT6654.
R1
4.7k
IOUT
4mA
3V
4
5mA
6
LT6654-2.5
0.1μF
1, 2
VOUT = –2.5V
VOUT
10mV/DIV/AC
2.5V/DC
V – VOUT
R ≤ EE
550μA + IOUT
C1
1μF
VEE
CLOAD = 1μF
50μs/DIV
6654 F05
6654 F07
Figure 7. Using the LT6654-2.5 to Build a –2.5V Reference
Figure 5. LT6654-2.5 Sourcing 4mA to 5mA
IOUT
–5mA
–4mA
VOUT
10mV/DIV/AC
2.5V/DC
CLOAD = 1μF
50μs/DIV
6654 F06
Figure 6. LT6654-2.5 Sinking 4mA to 5mA
6654fc
14
LT6654
APPLICATIONS INFORMATION
Long-Term Drift
Long-term drift cannot be extrapolated from accelerated
high temperature testing. This erroneous technique
gives drift numbers that are wildly optimistic. The only
way long-term drift can be determined is to measure it
over the time interval of interest. The LT6654 drift data
was taken on 40 parts that were soldered into PC boards
similar to a real world application. The boards were then
placed into a constant temperature oven with TA = 35°C,
their outputs scanned regularly and measured with an 8.5
digit DVM. Long-term drift curves are shown in Figure 8.
Their drift is much smaller after the ﬁrst thousand hours.
OUTPUT VOLTAGE CHANGE (ppm)
80
40
0
–40
–80
0
200
400
600
TIME (HOURS)
LT6654-2.5 S6 PACKAGE
FIRST THOUSAND HOURS
40
0
–40
–80
1000
1000
800
2000
1400
1600
1800
TIME (HOURS)
6654 F08b
LT6654-2.5 S6 PACKAGE
SECOND THOUSAND HOURS
(NORMALIZED TO THE FIRST THOUSAND HOURS)
6654 F08a
1200
80
40
PPM
OUTPUT VOLTAGE CHANGE (ppm)
80
0
–40
–80
1000
1500
TIME (HOURS)
LT6654-2.5 LS8 PACKAGE
0
500
2000
6654 G38
Figure 8. LT6654-2.5 Long Term Drift
6654fc
15
LT6654
APPLICATIONS INFORMATION
Power Dissipation
0.40
The power dissipation in the LT6654 is dependent on VIN,
load current and the package. The LT6654 package has
a thermal resistance, or θJA, of 192°C/W. A curve that
illustrates allowed power dissipation versus temperature
for the 6-lead SOT-23 package is shown in Figure 9. The
power dissipation of the LT6654-2.5 as a function of input
voltage is shown in Figure 10. The top curve shows power
dissipation with a 10mA load and the bottom curve shows
power dissipation with no load. When operated within
its speciﬁed limits of VIN = 36V and sourcing 10mA, the
LT6654-2.5 consumes about 335mW at room temperature.
The power-derating curve in Figure 9 shows the LT66542.5 can only safely dissipate 130mW at 125°C, which is
less than its maximum power output. Care must be taken
when designing the circuit so that the maximum junction
temperature is not exceeded. For best performance, junction temperature should be kept below 125°C.
0.35
0.7
POWER (W)
0.30
0.25
10mA LOAD
0.20
0.15
0.10
0.05
NO LOAD
0
5
0
10
15
20 25
VIN (V)
30
40
Figure 10. Typical Power Dissipation of the LT6654
50
MAX AVG HOT CYCLE MAX AVG COLD CYCLE
25°C TO 125°C TO 25°C 25°C TO –40°C TO 25°C
40
30
20
10
0
–150
–100
–50
0
50
100
DISTRIBUTION (ppm)
T = 150°C
eJA = 192°C/W
0.6
35
6654 F10
NUMBER OF UNITS
The LT6654 includes output current limit circuitry, as well
as thermal limit circuitry, to protect the reference from
damage in the event of excessive power dissipation. The
LT6654 is protected from damage by a thermal shutdown
circuit. However, changes in performance may occur as
a result of operation at high temperature.
335mW
150
6654 F11
Figure 11a. LT6654 S6 Thermal Hysteresis –40°C to 125°C
6
0.4
25°C TO –40°C TO 25°C
AND 25°C TO 125°C TO 25°C
5
0.3
130mW
0.2
0.1
0
0
20
40
60
80
100
TEMPERATURE (°C)
120
140
6654 F09
Figure 9. Maximum Allowed Power Dissipation of the LT6654
NUMBER OF UNITS
POWER (W)
0.5
4
3
2
1
0
–40 –30 –20 –10 0
10 20
DISTRIBUTION (ppm)
30
40
6654 F11b
Figure 11b. LT6654 LS8 Thermal Hysteresis –40°C to 125°C
6654fc
16
LT6654
APPLICATIONS INFORMATION
Hysteresis
Humidity Sensitivity
The hysteresis data is shown in Figure 11. The LT6654 is
capable of dissipating relatively high power. For example,
with a 36V input voltage and 10mA load current applied
to the LT6654-2.5, the power dissipation is PD = 33.5V
• 10mA = 335mW, which causes an increase in the die
temperature of 64°C. This could increase the junction
temperature above 125°C (TJMAX is 150°C) and may cause
the output to shift due to thermal hysteresis.
Plastic mould compounds absorb water. With changes in
relative humidity, plastic packaging materials change the
amount of pressure they apply to the die inside, which can
cause slight changes in the output of a voltage reference,
usually on the order of 100ppm. The LS8 package is hermetic, so it is not affected by humidity, and is therefore
more stable in environments where humidity may be a
concern.
300
The mechanical stress of soldering a surface mount voltage reference to a PC board can cause the output voltage
to shift and temperature coefﬁcient to change. These two
changes are not correlated. For example, the voltage may
shift but the temperature coefﬁcient may not.
To reduce the effects of stress-related shifts, mount the
reference near the short edge of the PC board or in a
corner. In addition, slots can be cut into the board on
two sides of the device.
TEMPERATURE (°C)
PC Board Layout
380s
TP = 260°C
TL = 217°C
TS(MAX) = 200°C
TS = 190°C
225
RAMP
DOWN
tP
30s
T = 150°C
150
tL
130s
RAMP TO
150°C
75
40s
120s
0
0
The capacitors should be mounted close to the LT6654.
The GND and VOUT traces should be as short as possible
to minimize I • R drops, since high trace resistance directly
impacts load regulation.
2
4
6
MINUTES
8
10
6654 F12
Figure 12. Lead Free Reﬂow Proﬁle
14
12
The different expansion and contraction rates of the materials that make up the LT6654 package may cause the
output voltage to shift after undergoing IR reﬂow. Lead
free solder reﬂow proﬁles reach over 250°C, considerably
more than with lead based solder. A typical lead free IR
reﬂow proﬁle is shown in Figure 12. Similar proﬁles are
found using a convection reﬂow oven. LT6654 devices run
up to three times through this reﬂow process show that the
standard deviation of the output voltage increases with a
slight negative mean shift of 0.003% as shown in Figure 13.
While there can be up to 0.014% of output voltage shift,
the overall drift of the LT6654 after IR reﬂow does not
vary signiﬁcantly.
10
NUMBER OF UNITS
IR Reﬂow Shift
260°C 3 CYCLES
260°C 1 CYCLE
LT6654S6
8
6
4
2
0
–140 –120 –100 –80 –60 –40 –20
CHANGE IN OUTPUT (ppm)
0
6654 F13
Figure 13. Output Voltage Shift Due to IR Reﬂow (%)
6654fc
17
LT6654
TYPICAL APPLICATIONS
Extended Supply Range Reference
Boosted Output Current Reference
4.5V < VIN < 36V
UP TO 160V
4.7μF
220Ω
330k
MMBT5551
2N2905
IN
BZX84C12
LT6654-2.5
0.1μF
IOUT
UP TO 300mA
LT6654-2.5 OUT
1μF
1μF
6654 TA02
6654 TA03
Boosted Output Current with Current Limit
Octal DAC Reference
4.5V < VIN < 36V
LT6654-2.5
2.65V < VIN < 5V
IN
OUT
VIN
1
LED1*
220Ω
4.7μF
0.1μF
10Ω
10μF
2
VREF
2N2905
VCC
CS
LT6654-2.5
IN
IOUT
UP TO 100mA
OUT
SCK
0.1μF
DAC A
LTC2600 DAC B
SDI
DAC C
CLEAR
DAC D
1μF
DAC E
6654 TA04
DAC F
*LED CANNOT BE OMMITTED
THE LED CLAMPS THE VOLTAGE
DROP ACROSS THE 220Ω AND
LIMITS OUTPUT CURRENT
DAC G
GND
DAC H
6654 TA05
6654fc
18
LT6654
PACKAGE DESCRIPTION
Please refer to http://www.linear.com/designtools/packaging/ for the most recent package drawings.
S6 Package
6-Lead Plastic TSOT-23
(Reference LTC DWG # 05-08-1636)
0.62
MAX
2.90 BSC
(NOTE 4)
0.95
REF
1.22 REF
3.85 MAX 2.62 REF
1.4 MIN
2.80 BSC
1.50 – 1.75
(NOTE 4)
PIN ONE ID
RECOMMENDED SOLDER PAD LAYOUT
PER IPC CALCULATOR
0.30 – 0.45
6 PLCS (NOTE 3)
0.95 BSC
0.80 – 0.90
0.20 BSC
0.01 – 0.10
1.00 MAX
DATUM ‘A’
0.30 – 0.50 REF
0.09 – 0.20
(NOTE 3)
1.90 BSC
S6 TSOT-23 0302
NOTE:
1. DIMENSIONS ARE IN MILLIMETERS
2. DRAWING NOT TO SCALE
3. DIMENSIONS ARE INCLUSIVE OF PLATING
4. DIMENSIONS ARE EXCLUSIVE OF MOLD FLASH AND METAL BURR
5. MOLD FLASH SHALL NOT EXCEED 0.254mm
6. JEDEC PACKAGE REFERENCE IS MO-193
6654fc
19
LT6654
PACKAGE DESCRIPTION
Please refer to http://www.linear.com/designtools/packaging/ for the most recent package drawings.
LS8 Package
8-Pin Leadless Chip Carrier (5mm w 5mm)
(Reference LTC DWG # 05-08-1852 Rev Ø)
8
2.50 ±0.15
PACKAGE OUTLINE
7
1
6
2
2.54 ±0.15
5
3
1.50 ±0.15
4
0.70 ±0.05
5.00 SQ ±0.15
5.80 SQ ±0.15
APPLY SOLDER MASK TO AREAS THAT ARE NOT SOLDERED
5.00 SQ ±0.15
1.45 ±0.10
0.95 ±0.10
4.20 SQ ±0.10
8
1
PIN 1
TOP MARK
(SEE NOTE 5)
R0.20 REF
8
2.00 REF
7
2
6
3
5
1
7
4.20 ±0.10
R0.20 REF
6
2
2.54 ±0.15
5
3
1.00 TYP
LS8 0609 REV Ø
4
0.70 TYP
NOTE:
1. ALL DIMENSIONS ARE IN MILLIMETERS
2. DRAWING NOT TO SCALE
3. DIMENSIONS PACKAGE DO NOT INCLUDE PLATING BURRS
PLATING BURRS, IF PRESENT, SHALL NOT EXCEED 0.30mm ON ANY SIDE
4. PLATING—ELECTO NICKEL MIN 1.25UM, ELECTRO GOLD MIN 0.30UM
5. SHADED AREA IS ONLY A REFERENCE FOR PIN 1 LOCATION ON THE
TOP AND BOTTOM OF PACKAGE
4
0.10 TYP
0.64 TYP
6654fc
20
LT6654
REVISION HISTORY
REV
DATE
DESCRIPTION
PAGE NUMBER
A
12/10
Added voltage options (1.250V, 2.048V, 3.000V, 4.096V, 5.000V) reﬂected throughout the data sheet.
B
3/11
Revised conditions for Output Voltage Noise in the Electrical Characteristics section.
C
8/12
Addition of LS8 Features and Order Information
Update to Electrical Characteristics to Include LS8 Package
Addition of Long Term Drift and Hysteresis Plots for LS8 Package
Addition of Humidity Sensitivity Information
Addition of LS8 Package Description
Addition of Related Parts
1-18
4
1,2,4
6
9, 15, 16
17
20
22
6654fc
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no representation that the interconnection of its circuits as described herein will not infringe on existing patent rights.
21
LT6654
TYPICAL APPLICATION
16-Bit ADC Reference
4.6V < VS < 36V
LT6654-4.096
IN
OUT
10μF
0.1μF
+
IN+
–2.048V < VDIFFERENTIAL < 2.048V
–
VREF
VCC
LTC2480
IN–
GND
fO
SDO
SDI
CS
TO MCU
SCK
6654 TA06
RELATED PARTS
PART NUMBER DESCRIPTION
COMMENTS
LT1460
Micropower Series Reference
0.075% Max, 10ppm/°C Max Drift, 2.5V, 5V and 10V Versions, MSOP, PDIP, S0-8,
SOT-23 and TO-92 Packages
LT1461
Micropower Precision LDO Series Reference
3ppm/°C Max Drift, 0°C to 70°C, –40°C to 85°C, –40°C to 125°C Options in SO-8
LT1790
Micropower Precision Series References
0.05% Max, 10ppm/°C Max, 60μA Supply, SOT-23 Package
LT6650
Micropower Reference with Buffer Ampliﬁer
0.05% Max, 5.6μA Supply, SOT-23 Package
LTC6652
Precision Low Drift Low Noise Buffered
Reference
0.5% Max, 5ppm/°C Max, 2.1ppmP-P Noise (0.1Hz to 10Hz) 100% Tested at –40°C,
25°C and 125°C
LT6660
Tiny Micropower Series Reference
0.2% Max, 20ppm/°C Max, 20mA Output Current, 2mm × 2mm DFN
LTC6655
Precision Low Noise Reference
2ppm/°C Max, 650nVP-P Noise (0.1Hz to 10Hz) 100% Tested at –40°C, 25°C and 125°C
LT6656
800nA Precision Voltage Reference
800nA, 10ppm/°C Max, 0.05% Max, SOT-23 Package
6654fc
22 Linear Technology Corporation
LT 0812 REV C • PRINTED IN USA
1630 McCarthy Blvd., Milpitas, CA 95035-7417
(408) 432-1900 ● FAX: (408) 434-0507
●
www.linear.com
© LINEAR TECHNOLOGY CORPORATION 2010

Open as PDF

Similar pages