Catalog 1308242 Issued 3-03 (PDF Rev. 11-04) OEG OZ/OZF series 16A Miniature Power PC Board Relay Appliances, HVAC, Office Machines. UL File No. E82292 CSA File No. LR48471 TUV File No. R85447 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20°C Features • Meet UL 508, CSA and TUV requirements. • 1 Form A and 1 Form C contact arrangements. • Immersion cleanable, sealed version available. • Meet 5,000V dielectric voltage between coil and contacts. • Meet 10,000V surge voltage between coil and contacts (1.2 / 50µs). • Quick Connect Terminal type available (OZF). • UL TV-8 rating available (OZT). Contact Data @ 20°C Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Ag Alloy (1 Form C) and AgSnO (1 Form A). Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Contact Ratings Ratings: OZ/OZF: 20A @ 120VAC resistive, 16A @ 240VAC resistive, 5A @ 120VAC inductive (cosø= 0.4), 5A @ 24VDC inductive ( L/R= 7msec). 1/2 HP @ 120VAC, 70°C. 1 HP @ 240VAC. 20A @ 120VAC, general use. 16A @ 240VAC, general use, N.O. only, @ 105°C*. 16A @ 240VAC, general use, carry only, N.C. only, @ 105°C*. * Rating applicable only to models with Class F (155°C) insulation system. OZT: 8A @ 240VAC resistive, TV-8 @ 120VAC tungsten, 25,000ops. Max. Switched Voltage: AC: 240V. DC: 110V. Max. Switched Current: 16A (OZ/OZF), 8A (OZT). Max. Switched Power: 3,850VA, 600W. Initial Dielectric Strength Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 5,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 10,000V (1.2 / 50µs). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDC. Voltage: 5 to 48VDC. Nominal Power: 720 mW (OZ-D), 540mW (OZ-L). Coil Temperature Rise: 45°C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Dimensions are shown for Nominal Current (mA) Coil Resistance (ohms) ± 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 5 6 9 12 24 48 106.4 88.0 58.0 44.4 21.8 10.9 47 68 155 270 1,100 4,400 3.75 4.50 6.75 9.00 18.00 36.00 0.25 0.30 0.45 0.60 1.20 2.40 Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) ± 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 5 6 9 12 24 48 138.9 120.0 78.3 60.0 29.3 14.5 36 50 115 200 820 3,300 3.50 4.20 6.30 8.40 16.80 33.60 0.25 0.30 0.45 0.90 1.20 2.40 OZ-D Standard Operate Data Must Operate Voltage: OZ-D: 70% of nominal voltage or less. OZ-L: 75% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Operate Time: OZ-D: 15 ms max. OZ-L: 20 ms max. Release Time: 8 ms max. Environmental Data Temperature Range: Operating, Class A (105°C) Insulation: OZ-D: -30°C to +55°C OZ-L: -30°C to +70°C. Operating, Class F (155°C) Insulation: OZ-D: -30°C to +85°C OZ-L: -30°C to +105°C. Operating: OZ-D: -30°C to +55°C OZ-L: -30°C to +70 °C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Mechanical Data Coil Data 462 reference purposes only. OZ-L Sensitive Rated Coil Voltage (VDC) Dimensions are in inches over (millimeters) unless otherwise specified. Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): OZ-S: Vented (Flux-tight) plastic cover. OZF-SS: Vented (Flux-tight) plastic cover. OZ-SH: Sealed plastic case. Weight: 0.46 oz (13g) approximately. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 (PDF Rev. 11-04) OEG Ordering Information B Typical Part Number OZ -SH -1 24 L M 1 F ,294 1. Basic Series: OZ = 16A PC Board Terminals OZF = Quick Connect Terminals OZT = TV-8 Rating PC Board Terminals 2. Enclosure: S = Vent (Flux-tight)* plastic cover (only available with OZF) SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: D = Standard (720mW) L = Sensitive (540mW) 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Contact Material: Blank = AgCdO (1 Form C) 1 = AgSnO (1 Form A, only available with OZ....LM1 or DM1) 8. Mounting and Termination: Blank = PC Board Terminals P = PC Board and Quick Connect Terminals (only available only with OZF-S-1..LM1P). 9. Insulation System: Blank = Class A (105°C) Insulation F= Class F (155°C) Insulation 10. Suffix: ,200 = Standard model for "SS" enclosure on OZ and OZT ,000 = Standard model for coil input "D" on OZF Other Suffix = Custom model ,294 = Standard model for "SH" enclosure on OZ and OZT ,300 = Standard model for coil input "L" on OZF * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. OZ-SH-124D,294 OZ-SH-105LM1,294 OZ-SH-105D,294 OZ-SH-112D,294 Outline Dimensions .092 ± .012 (2.35 ± .3) .266 ± .012 (6.75 ± .3) .2 ± .002 (.5 ± .05) OZF OZ OZ-SH-124L,294 OZ-SH-105L,294 OZ-SH-112L,294 OZ-SH-112LM1,294 OZ-SH-124LM1,294 .061 DIA (1.55) .187 .134 (4.75) (3.4) PC Board Layouts (Bottom View) .224 (5.7) OZ .25 (6.35) .811 ± .02 (20.6 ± .5) 8 – .059 DIA (1.5) .126 (3.2) .295 ± .012 (7.5 ± .3) .197 ± .012 (5.0 ± .3) .945 ± .08 (24.0 ± .2) .024 c (.60) .012 (.3) 1.15 ± .02 (29.2 ± .5) .157 ± .012 (4.0 ± .3) .012 .047 (.3) (1.2) .012 (.3) .295 ± .012 (7.5 ± .3) .047 (1.2) .024 ± .004 (0.6 ± .1) 1.14 ± .02 (29.0 ± .5) .504 ± .02 (12.8 ± .5) .085 ± .012 (2.15 ± .3) .197 ± .012 (5.0 ± .3) .59 ± .012 (15.0 ± .3) .073 ± .012 .197 ± .012 (1.85 ± .3) (5.0 ± .3) .197 ± .012 (5.0 ± .3) .600 ± .012 (15.24 ± .3) .047 (1.2) OZF .047 (1.2) .047 (1.2) 2 – .047 DIA 2 – .059 DIA (1.5) (1.2) .394 (10.0) .394 ± .006 (10.0 ± .15) .300 ± .004 (7.6 ± .1) .394 ± .006 (10.0 ± .15) .300 ± .004 (7.6 ± .1) .098 ± .004 (2.5 ± .1) .165 ± .012 (4.2 ± .3) 1.02 ± .02 (26.0 ± .5) .073 (1.85) 1.02 ± .008 (26.0 ± .2) Wiring Diagrams OZ OZF * (Bottom View) (Bottom View) (Top View) * No electrical connection, for board attachment only. Reference Data Operating Voltage Operate Time Operating Votage Range 120 100 Maximum Allowable Coil Voltage 13A/16A 80 Cool Coil 8A Hot Coil Applied Pick-Up Voltage 10 240VAC Resistive Operate Time 8 6 4 10 2 20 0 Operation (x 104) 16A 140 60 100 13A 8A 160 40 Life Expectancy 12 Time (msec) % of Supplying Voltage to Coil 180 Release Time 0 20 40 60 80 100 120 140 Ambient Temp. (°C) Note: This data is based on the max. allowable temperature for E type insulation coil (115°C). -40 -20 Dimensions are shown for reference purposes only. 0.2 Dimensions are in inches over (millimeters) unless otherwise specified. 0.4 0.6 0.8 1.0 Coil Power (W) 1.2 1.4 1 0 Specifications and availability subject to change. 2 4 6 8 10 12 14 16 18 Contact Current (A) 20 www.tycoelectronics.com Technical support: 463 Refer to inside back cover.