MICROSPACE PC/104 Flash/SRAM Memory - MSMF104 Feature • Compatible with any PC/104 CPU or CPU that provides a PC/104 Bus interface • Ideal for ruggedized applications • 2x Diskon Chip Sockets • 16 Bit ISA Bus • Supports most Operating Systems • Low Power Consumption Option • SRAM • Soldered Flash Description Technical Specifications FEATURES FUNCTIONS Function Controller Flashdisk 2x DiskOnChip Connector Bus Remarks Remarks Power Normal Power Suspended Operating Temperature Extended Temperature – ISA max. 2x 144MB – 5V/100mA (typ.) 5V/100mA (typ.) -25°C to +70°C –40°C to +85°C Weight (gr) MTBF 100 >100´000h The MICROSPACE module MSMF104 board integrates two 32 Pin DIP sockets, which will allow a user to have as little as 2MB and as much as 288MB of Flash memory by utilizing M-Systems DiskOnChip devices. The board was designed to provide the end user with a solution for CPU boards that do not have any Flash memory directly on the board, or have too little of it. Since the board is based on the PC/104 standard, it can be used with any PC/104 CPU or any SBC that provides a 16 Bit Bus interface. As an option, the MSMF104 can be equipped with SRAM Memory or Flash Memory that is directly soldered onto the board. Ordering Information Item Codes MSMF104-2D Part# 806020 Description Dual Socket for 2 DiskOnChip Devices Data is subject to change without notice Advanced Digital Logic, Inc.; 4411 Morena Blvd., Suite 101; San Diego, CA 92117-4345 Ph. 858 490-0597 F. 858 490-0599; e-mail: [email protected]; web: www.adl-usa.com