GKT-VN Aluminum Electrolytic Capacitor–SMD FEATURES u Bi-polar with general temperature+85℃ u Load life of 1000 hours. SPECIFICATIONS OPERATING TEMPERATURE -40℃ ~ +85℃ Voltage Range 6.3V ~ 50V.DC Capacitance Range 0.1 ~ 100μF Capacitance Tolerance ±20% at 120Hz, 20℃ Leakage Current Dissipation Factor (Tan δ) Stability At Low Temp. Leakage current≤ 0.005CV or 10μA, whichever is greater (After 2 minutes application of rated voltage) Measurement Frequency: 120Hz, Temperature: 20℃ Rated Voltage (V) 6.3 10 Tan δ (Max.) 0.24 0.20 Measurement Frequency: 120Hz Rated Voltage (V) Impedance Ratio Z(-25℃ )/ Z(20℃) ZT / Z20 (Max.) Z(-40℃) / Z(20℃) 16,25 0.17 35,50 0.15 6.3 4 10 3 16,25 2 35,50 2 8 6 4 3 Load Life After 1000 hours application of rated voltage at85℃ (the polarity needs to exchange every 250 hours), Capacitors meet the characteristics listed at right. Capacitance Change Within ±30% of initial value Dissipation Factor 200% or less of initial specified value Leakage Current Initial specified value or less Shelf Life After leaving capacitors under no load at 85℃ for 1000 hours, They meet the specified value for load life characteristics listed above. Resistance to Soldering Heat After reflow soldering and restored at room temperature, they meet the characteristics listed at right. Capacitance Change Within ± 10% of initial value Dissipation Factor Initial specified value or less Leakage Current Initial specified value or less DRAWING (Unit: mm) *1 Voltage mark for 6.3V is [6V] *2 Applicable toΦ6.3*7.7 DIMENSIONS(Unit: mm) ØDxL 4x5.4 5x5.4 6.3x5.4 6.3x7.7 A 2.0 2.2 2.6 2.6 B 4.3 5.3 6.6 6.6 C 4.3 5.3 6.6 6.6 E±0.2 1.0 1.4 1.9 1.9 L 5.4 5.4 5.4 7.7 Please visit our website to get more update data, those data & specification are subject to change without notice. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 1 GKT-VN Aluminum Electrolytic Capacitor–SMD DIMENSIONS&MAXIMUM PERMISSIBLE RIPPLE CURRENT&IMPEDANCE 6.3 10 16 25 35 50 0J 1A 1C 1E 1V 1H WV/V Cap/μF 0.1 0R1 -- -- -- -- -- -- -- -- -- -- 4×5.4 1.0 0.22 R22 -- -- -- -- -- -- -- -- -- -- 4×5.4 2.0 0.33 R33 -- -- -- -- -- -- -- -- -- -- 4×5.4 2.8 0.47 R47 -- -- -- -- -- -- -- -- -- -- 4×5.4 4.0 1 010 -- -- -- -- -- -- -- -- -- -- 4×5.4 8.4 2.2 2R2 -- -- -- -- -- -- -- -- 4×5.4 8.4 5×5.4 13 3.3 3R3 -- -- -- -- -- -- 5×5.4 12 5×5.4 16 5×5.4 17 4.7 4R7 -- -- -- -- 4×5.4 12 5×5.4 16 5×5.4 18 6.3×5.4 20 10 100 -- -- 4×5.4 17 5×5.4 23 6.3×5.4 27 6.3×5.4 29 6.3×7.7 36 22 220 5×5.4 28 6.3×5.4 33 6.3×5.4 37 6.3×7.7 50 6.3×7.7 54 -- -- 33 330 6.3×5.4 37 6.3×5.4 41 6.3×5.4 49 6.3×7.7 61 -- -- -- -- 47 470 6.3×5.4 45 6.3×7.7 61 6.3×7.7 75 -- -- -- -- -- -- Case Allowable 100 101 6.3×7.7 82 6.3×7.7 85 -- -- -- -- -- -size ripple Case Size ØD×L(mm),ripple current(mA rms) at 85℃ 120Hz FREQUENCY COEFFICIENT OF ALLOWABLE RIPPLE CURRENT Frequency 50Hz 120Hz 300Hz 1KHz 10KHz~ Coefficient 0.70 1.00 1.17 1.36 1.50 Please visit our website to get more update data, those data & specification are subject to change without notice. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 2 GKT-VN Aluminum Electrolytic Capacitor–SMD HOW TO ORDER GKT | VE | 0J | M | 220 | 040054 | T | R | Series Sub Series Voltage Capacitance Tolerance 2. Capacitance Case Size Packing Pb 3. 4. 5. 6. 1. NOTE: 1. Rated Voltage Code 0G Voltage 4 0J 1A 1C 1E 1V 1H 1J 2A 6.3 10 16 25 35 50 63 100 2. Capacitance Tolerance Code K M Q T ±20% +30-10% +50-10% Tolerance ±10% 3. Capacitance Code 0R1 R47 010 4R7 100 470 101 471 102 472 103 0.1 0.47 1 4.7 10 47 100 470 1000 4700 10000 Capacitance (µF) 4. Case Size Code Case Size (mm) 5. Packing Code Packing 6. Pb Code Pb 040054 050054 063054 080105 100105 125135 160215 4x5.4 5x5.4 6.3x5.4 8x10.5 10x10.5 12.5x13.5 16x21.5 T Tape & Reel R RoHS Note: Specifications are subject to change without notice. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 3