AP725 20W TO-263 Power Resistor • Power Dissipation 20 watts with h/s • Low inductance • D2PAK housing • Electrically isolated from backplate • TCR Options ±100 ppm/°C • RoHS Compliant Characteristics Tolerance (Code): ± 1% (F), ± 5% (J) Value range: R02 to 130K (with standard resistance values) Power rating: 20W at 25˚C case temperature Temperature coefficient: ±100ppm/˚C Thermal resistance: 6.5˚C/W Inductance: 0.1µH maximum Operating voltage: √P*R with a maximum of 250V Dielectric strength: 2kVac Insulation resistance: 10GΩ Operating temperature: -55˚C to 155˚C PWR263S-20 Series Power Resistor Re Product Dimensions 10.1 (0.398) 7.8 (0.307) 48 ° Electrical Specifications 4.5 (0.177) 1.6 (0.063) 1.3 (.051) 10.4 (0.409) REF. 1 (0 15.39 (0.606) 8.8 (0.347) Parameter Specification Short term overload (2x Pr for R < 2Ω, 1.6 x Pr for R ≥ 2Ω, V < 1.5x operating voltage) ∆R ±0.25% Load life ( 1000 hours at rated power) Thermal shock (-55˚C to 155˚C, 5 cycles) 1.4 (0.055) 5.08 (0.20) ∆R ±1.0% 1.92 (0.076) ∆R ±0.5% Resistance to soldering heat (10 sec at 270˚C) ∆R ±0.5% Vibration (20 G 10 - 2000Hz .06” D.A) ∆R ±0.25% Moisture sensitivity level 1 3.1 (0.122) 0.25 (0.010) MM (INCHES) ±0.38 TOLERANCE: UNLESS OTHERWISE NOTED (±0.015) DIMENSIONS: LEAD 0.102 MAX AT MOUNTING COPLANARITY: (0.004) SURFACE 275 <1> Maximum of 20 seconds between 260 °C peak +245 °C and +260 °C Power dissipation is 2.8W at an ambient temperature of 25°C <1> 245 °C 225 when mounted on a double sided copper using FR4, 70μm of H 220 °C Temperature (°C) copper 39x30x1.6mm RESIS CODE MANU TRAD Soldering Profile Soldering Profile Ty 190 °C 175 60 - 90 seconds Ramp Down 6 °C/second 150 °C 125 Mod P Pack 2 60 - 120 seconds 10 seconds minimum Pin S S 75 Ramp Up 3 °C/second maximum 25 0 50 100 Pow 2 150 Time (seconds) 200 250 300 Power dissipation is 2.8 W at an ambient temperature of 25 ˚C when mounted on a double-sided copper board using FR4 standard, 70 µm of copper, 39 x 30 x 1.6 mm. Resi < ≥ Abso J F Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. For more information and ordering, please consult www.arcolresistors.com Page 1 of 2 2/14.05 Pack E B AP725 20W TO-263 Power Resistor PWR263S-20 Series Power Resistor PWR263S-20 Series Power Resistor Dimensions (mm ± 0.38) Recommended Padpad Layout layout Recommended Product Dimensions Product Dimensions 10.1 (0.398) 7.8 (0.307) 1.6 10.1 (0.398) (0.063) 7.8 (0.307) 48 ° 10.4 (0.409) REF. 8.8 (0.347) 11.0 (.433) 1.3 4.5 (.051) (0.177) 1.6 (0.063) 10.4 (0.409) REF. 48 ° Recommended Pad Layout 4.5 (0.177) 1.3 (.051) 15.39 (0.606) 4.02 (0.158) 15.39 (0.606) 4.02 (0.158) 10.52 (0.414) 10.52 (0.414) 2.25 (0.089) 8.8 (0.347) 2.25 (0.089) 4.23 (0.166) 1.92 (0.076) 1.4 (0.055) 20 Series Power Resistor 5.08 5.08 (0.20) 1.4 (0.055) 0.25 (0.010) (0.20) 3.1 (0.122) (0.076) 0.25 (0.010) 275 +245 °C and +260 °C 260 °C peak <1> Maximum of 20 seconds <1> between 245 °C +245 °C and +260 °C 225 125 1.92 (0.076) 150 °C 125 60 - 90 seconds 190 °C 0.25 (0.010) 60 - 90 seconds Ramp Down 6 °C/second 3.1 (0.122) 25 (0.004)AP72530RF SURFACE 50 6 °C/second (.315) Ramp AP72525RF Up MAX AT MOUNTINGAP72575RF 30.102 °C/second maximum AP725100RF MODEL NUMBER MODEL NUMBER TOLERANCE 263 20 DATE CODE XXXX X% COUNTRY OF ORIGIN YYY COSTA R ICA TOLERANCE DATE CODE COUNTRY OF ORIGIN How to Order 0 How PWR 100 263 S 115 -to20Order - 130 10R0 F 145E 85 155 RESISTANCE CODE Resistor Model PWR = Power Resistor Package 263 = D2PAK 60 - 120 seconds AP725R1F AP7255RF LEAD AP725R5F AP72510RF COPLANARITY: AP7251RF50 AP72512RF 100 AP7251R5F 25 0 AP72515RF50 AP7252RF AP72520RF 263 20 RESISTANCE XXXX CODE X% YYY COSTA R ICA MANUFACTURER'S TRADEMARK Backplate Temperature 263 S - 20 - 10R0 F E 2.4 Ambient TemperaturePWR (°C) Model (0.095) °C PWR = Power Ramp Down 8.0 Standard part numbers 0 Marking Typical Part Marking 0.26 (0.10) 20 4.23 (0.166) 220 °C 60 - 120 seconds MM DIMENSIONS:10 seconds minimum (INCHES) Typical 10 seconds minimum ±0.38 Ramp TOLERANCE: Up UNLESS OTHERWISE NOTED 75 3 °C/second maximum(±0.015) 75 25 Temperature (°C) 190 °C 175 8.0 (.315) 60 260 °C peak 40 <1> 245 °C 220 °C 225 150 °C1.4 (0.055) 2.25 (0.089) 80 % Soldering Profile 8.8 <1> Maximum of 20 seconds between (0.347) 175 MANUFACTURER'S TRADEMARK 100 10.52 (0.414) 15.39 (0.606) Power Rated % 275 10.4 Profi(0.409) le REF. Power Rated Soldering 2.4 (0.095) Derating Curve 4.5 (0.177) 1.6 (0.063) 0.26 (0.10) 2.4 (0.095) 8.0 (.315) DIMENSIONS: 0.1 398) 7.8 307) 0.26 (0.10) 4.23 (0.166) MM Recommended Pad Layout (INCHES) Typical Part MM DIMENSIONS: ±0.38 (INCHES) 11.0 TOLERANCE: UNLESS OTHERWISE NOTED (±0.015) (.433) ±0.38 1.3 TOLERANCE: UNLESS OTHERWISE NOTED RESISTANCE LEAD 0.102 MAX AT MOUNTING (±0.015) (.051) CODE 4.02 COPLANARITY: (0.004) SURFACE LEAD 0.102(0.158) MAX AT MOUNTING COPLANARITY: (0.004) SURFACE ns Temperature (°C) 3.1 (0.122) 1.92 11.0 (.433) Package 2 Pin Style Part MarkingS = Surface Mount 263 = D PAK Ordering Procedure Pin Style Power S = Surface Mount 20 = 20 W Standard Resistor: Series, Resistance Value, Tolerance, Power MODEL Resistance Value 20 = 20- W NUMBER Packaging T&R - TR or Tubes blank 263options 20 <100 ohms ... “R” represents decimal AP72533RF 200 AP725150RF 150 250 300 TOLERANCEResistance Value XXXX X% point (examples: 7R50 = TimeAP72547RF (seconds) DATE CODE AP725200RF YYY MANUFACTURER'S ... “R” represents decimal 100 150 200 250 300 7.5 Ω; <100 R500 ohms = 0.5 Ω) TRADEMARK COUNTRY COSTA R ICA AP72568RF AP7251KF e.g. AP725 8R2 J TR / AP725 2R F digits are point (examples: 7R50 = Time (seconds) ≥100 ohms First three OF .... ORIGIN wer dissipation is 2.8 W at an ambient temperature of 25 ˚C when mounted on a uble-sided copper board using FR4 standard, 70 µm of copper, 39 x 30 x 1.6 mm. 0 seconds between Power dissipation is 2.8 W at an ambient temperature of 25 ˚C when mounted on a 260 °C peak 260 °C double-sided copper board using FR4 standard, 70 µm of copper, 39 x 30 x 1.6 mm. <1> significant, fourth digit7.5 Ω; R500 = 0.5 Ω) ≥100number ohms....ofFirst three digits are represents significant, fourth digit zeros to follow (examrepresents number of ples: 2000 = 200 ohms; 245 °C 3002 = 30K ohms) zeros to follow (examples: 2000 = 200 ohms; Absolute Tolerance 220 °C 3002 = 30K ohms) How to Order J=5% Absolute Tolerance 190 °C 60 - 90 F = 1 % PWR 263 S - 20 - 10R0 F EJ = 5 % seconds Packaging F=1% Ramp Down Model = Tape & Reel ARCOL UK Limited, The information Econtained herein does not form part of a 6 °C/second Packaging PWR = Power cifications are subject to change without notice. Blank = Tubes E = Tape notice. & Reel ARCOL Resistorand is subject to change without Ind. Estate, contract tomers shouldThreemilestone verify actual device performance in their specific applications. Specifications are subject to change without notice. Blank = Tubes Package operate a policy of continual product development, therefore, 60 - 120 Truro, seconds Cornwall, TR4 9LG, UK. Customers should verify actual device performance in their specific applications. 263 = D2PAK T +44 (0) 1872 277431 10 seconds minimum specifications may change. Pin Style S = Surface Mount F +44 (0) 1872 222002 Ramp Up E [email protected] 3 °C/second maximum www.arcolresistors.com 150 200 250 100 Power It is the responsibility of the customer to ensure that the 20 = 20 W component selected from our range is suitable for the intended 300 Time (seconds) 8 W at an ambient temperature of 25 ˚C when mounted on a oard using FR4 standard, 70 µm of copper, 39 x 30 x 1.6 mm. Resistance Value If in doubt please ask ARCOL. <100 application. ohms ... “R” represents decimal point (examples: 7R50 = 7.5 Ω; R500 = 0.5 Ω) Page 2 ofohms 2 .... First three digits are ≥100 significant, fourth digit represents number of zeros to follow (examples: 2000 = 200 ohms; 3002 = 30K ohms) Absolute Tolerance J=5% F=1% 2/14.05