ETC NAD-6005 60w open frame single output Datasheet

60W Open Frame Single Output
NAD-600X series
Feature:
l
l
l
l
90 to 264Vac universal input range.
UL/CUL, TUV, CB safety meet(approval).
EMI/RFI meet VDE & FCC limit B.
Low cost & compact size.
l
l
60Watts in127×76.2×44.1mm Size.
2 Year Warranty.
Specifications: typical at nominal line, full load at 25 ° C.
Input Specifications:
General Specifications:
Input voltage: 90 to 264Vac
Efficiency: 75% typical at full load
Input Frequency: 47 Hz to 63Hz
Hold-up time: 15ms @ 115Vac full load
Input inrush current: 20A at 115Vac
40A at 230Vac
EMI/RFI: VDE & FCC Class B limits
Dielectric Withstand:
Input/output: 3000Vac
Input/Ground: 1500Vac
Earth leakage: 0.2mA max @ 115Vac
0.4mA max @ 230Vac
Output Specifications:
Output Rating: See Selection table
Output Voltage Accuracy : ± 5% max.
Line Regulation: ± 1% max.
Load Regulation: ± 1% max.
(Full to half load)
Transient Response ± 1% max.dev.
(Full to half load) 500uS recovery
Temperature Coefficient: ± 0.04% / °C
Ripple & Noise: 1% P-P max.
¬Safety Meet(Approval):
UL/CUL UL60950
TUV EN60950
CB IEC950
Switching frequency: 20kHz(reference)
Weight: 350g
MTBF: 100,000hours(MIL-HDBK-217F)
Environmental Specifications:
Operating temperature: 0 to +50°C
Storage temperature: -20 to +85°C
Humidity: 5 to 95 % RH non-condensing
Protections:
b. Over voltage protection
Vibration: 2.4G , 5 to 500Hz
c. Over power protection
Cooling: Free air convection
d. Short circuit protection
Note:
1. Vibration test: Three orthogonal axes, random vibration, 10 minutes for each axis.
2. Maximum output power is 60W.
3. At least 20% of load is required to obtain stable regulation.
4. Ripple & noise test method is measured at output terminal across a 0.1uF ceramic cap
& a 10uF tantalum or electrolytic cap in parallel with a 20MHz bandwidth oscilloscope
directly.
¬ Please refer the safety approval status on appendix 1, For latest safety approval status
Please consult YCL or visit" www.ycl.com.tw"
Date: Sep 19,2003
13
60W Open Frame Single Output
NAD-600X series
Model Selection Table:
Output
Voltage
5V
12V
3.3V
Output Current
Minimum
0mA
0mA
0mA
Output Current
Maximum
12A
5A
18A
Model No.
NAD-6001
NAD-6002
NAD-6005
Note:
1. Other output voltage versions available. Please Consult factory for details.
Max.
Power
60W
60W
60W
Dimensions: mm ± 0.5mm
DC Output Pin Functions
Pin 1,2,3,4
+output
Pin 5,6,7,8
COM
DC output mating connector is Molex 09-65-2088, Ever 8673-08 or
equivalent.
l AC input mating connector is Molex 5096-03C, Ever 8673-05N2,4
or equivalent.
l
Date: Sep 19,2003
14
Similar pages