HD74UH4066 Analog Switch REJ03D0204–0400Z (Previous ADE-205-022B (Z)) Rev.4.00 Feb.02.2004 Description The HD74UH4066 is high-speed CMOS analog switch using silicon gate CMOS process. With CMOS low power dissipation, it provides high speed. The device has low ON resistance for good transfer characteristics and can take wide range of input voltage. Features • Encapsulated in very small 5pins package of 2.9 × 1.6 × 1.1 mm, the efficiency to mount on substrate is significantly improved. • The basic gate function is lined up as Renesas uni logic series. • Supplied on emboss taping for high-speed automatic mounting. • Electrical characteristics equivalent to the HD74HC4066 Supply voltage range: 2 to 6 V Operating temperature range: –40 to +85°C • | IOH | = IOL = 2 mA (min) • Ordering Information Part Name Package Type Package Code Package Abbreviation Taping Abbreviation (Quantity) HD74UH4066EL MPAK-5 pin MPAK-5V − EL (3,000 pcs/reel) Rev.4.00, Feb.02.2004, page 1 of 8 HD74UH4066 Pin Arrangement IN/OUT 1 5 VCC OUT/IN 2 GND 4 Control 3 (Top view) Article Indication Marking H 9 Lot number A Absolute Maximum Ratings Item Symbol Ratings Unit Supply voltage VCC –0.5 to +7.0 V Input voltage VIN –0.5 to VCC +0.5 V Output voltage VOUT –0.5 to VCC +0.5 V Input diode current IIK ±20 mA Output diode current IOK ±20 mA Output current IOUT ±25 mA VCC/GND current ICC, IGND ±25 mA Power dissipation PT 200 mW Storage temperature Tstg –65 to +150 °C Rev.4.00, Feb.02.2004, page 2 of 8 HD74UH4066 Recommended Operating Conditions Item Symbol Ratings Unit Supply voltage VCC 2 to 6 V Input voltage VIN 0 to VCC V Output voltage VOUT 0 to VCC V Operating temperature Topr –40 to +85 °C Input rise/fall time tr, tf 0 to 1000 (VCC = 2.0 V) ns 0 to 500 (VCC = 4.5 V) 0 to 400 (VCC = 6.0 V) Electrical Characteristics VCC Ta = 25°C Ta = –40 to 85°C Item Symbol (V) Min Typ Max Min Max Unit Input voltage VIH 2.0 1.5 — — 1.5 — V 4.5 3.15 — — 3.15 — 6.0 4.2 — — 4.2 — 2.0 — — 0.5 — 0.5 4.5 — — 1.35 — 1.35 6.0 — — 1.8 — 1.8 2.0 — 2000 5000 — 6250 4.5 — 100 200 — 250 VIN = 0 to VCC 6.0 — 60 170 — 210 IIN/OUT = 1 mA IS (off) 6.0 — — ±0.1 — ±1.0 µA VC = VIL VIN = VCC, VOUT = GND or VIN = GND, VOUT = VCC IS (on) 6.0 — — ±0.1 — ±1.0 µA VC = VIH VIN = VCC or GND Input current IIN 6.0 — — ±0.1 — ±1.0 µA VIN = VCC or GND Operating current ICC 6.0 — — 1.0 — 10.0 µA VIN = VCC or GND VIL On resistance Leak current RON Rev.4.00, Feb.02.2004, page 3 of 8 Test Conditions V Ω VC = VIH HD74UH4066 Switching Characteristics Ta = 25°C Ta = –40 to 85°C Item Symbol VCC Min Typ Max Min Propagation delay time tPLH tPHL 2.0 — — 50 — 65 4.5 — 4 10 — 13 6.0 — — 9 — 11 2.0 — — 115 — 145 4.5 — 10 23 — 29 6.0 — — 20 — 25 2.0 — — 115 — 145 4.5 — 14 23 — 29 6.0 — — 20 — 25 2.0 — 20 — — — 4.5 — 30 — — — 6.0 — 30 — — — Output enable time tPZL tPZH Output disable tLZ tHZ time Maximum control frequency tmax Max Unit Test Conditions ns RL = 10 KΩ ns RL = 1 KΩ ns RL = 1 KΩ MHz Control input capacitance CIN — — 5 10 — 10 pF Switch I/O capacitance CIN/OUT — — 6 — — — pF Feed through capacitance CIN-OUT — — 0.5 — — — pF Power dissipation capacitance CPD — — 13 — — — pF Rev.4.00, Feb.02.2004, page 4 of 8 HD74UH4066 Test Circuit RON VCC VC =VIH VCC VIN =VCC (ON) VOUT VIN–OUT RON = 10 -3 GND 1.0 mA + V (Ω) — VIN–OUT IS (OFF), IS (ON) VCC VCC VC =VIL VC =VIH VCC A VCC A (OFF) VIN =VCC or GND GND VOUT =GND or VCC (ON) VIN =VCC or GND GND VOUT OPEN tPLH, tPHL VCC VC =VIH tr VIN VCC VIN GND RL= 10 k Ω CL= 50 pF 90% 50% t PLH VOUT (ON) tf VOUT VCC 10% t PHL GND VOH 50% VOL Rev.4.00, Feb.02.2004, page 5 of 8 HD74UH4066 tZH, tZL / tHZ, tLZ VCC VC S1 tr R L=1 kΩ VIN VCC GND VCC 90% 50% VC VOUT tf 10% S2 CL=50 pF GND t HZ t ZH RL =1 kΩ 90% VOH 50% VOUT VOL t ZL t LZ 50% Item S1 S2 tZH VCC GND tZL GND VCC tHZ VCC GND tLZ GND VCC VOH 10% VOL Maximum control frequency VCC VC VCC VC VCC VIN =VCC GND Rev.4.00, Feb.02.2004, page 6 of 8 GND VOUT RL= 1 kΩ CL=15 pF VOUT VCC /2 HD74UH4066 CIN/OUT, CIN–OUT CIN–OUT VC =GND VCC VCC (OFF) CIN/OUT Rev.4.00, Feb.02.2004, page 7 of 8 GND CIN/OUT HD74UH4066 Package Dimensions Unit: mm 1.9 ± 0.2 0.95 0.16 + 0.1 – 0.05 0 – 0.1 2.8 + 0.2 – 0.3 + 0.2 0.6 1.6 – 0.1 0.6 0.95 + 0.1 5 – 0.4 – 0.05 + 0.2 1.1 – 0.1 0.3 2.9 ± 0.2 Package Code JEDEC JEITA Mass (reference value) Rev.4.00, Feb.02.2004, page 8 of 8 MPAK–5V — — 0.015 g Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501 Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 © 2004. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .1.0