ITT DA19977-1 Defining and champooning innivation Datasheet

D sub:Layout 1
3/24/09
12:37 PM
Page 1
Inside front cvr & TOC:Layout 1
3/24/09
11:55 AM
Page 1
Cannon, VEAM, BIW
A Historical Achievement of Technology Leadership
Defining and Championing Innovation
Showcasing a portfolio of creativity, ITTʼs “Engineered For Life” execution embraces products which have become ubiquitous in a broad collection of markets including: Military/Aerospace, Civil Aircraft, Industrial Instrumentation, Medical, Oil & Gas, Energy, Transportation, Telecom/Handset, Computer, Consumer, and
Automotive.
ITTʼs rich interconnect history embraces contributions to both technological breakthroughs and social movements. With one of the industryʼs broadest product offerings, ITTʼs interconnect products have supported:
•
Every Free World space mission, bringing the universe to our doorstep.
•
Commercial and military communications systems, linking the voices of the world.
•
Motion picture, radio, and television equipment, serving laughter and entertainment to millions.
•
Computerized tools, reshaping the information highway.
•
Aircraft, rapid transit, and automobiles, mobilizing our expanding society.
•
Oil and natural gas production, powering the worldʼs economies.
•
Agricultural equipment, attacking the roots of world hunger.
First
“Cannon Plug”
4 Pole Power
Connector
Cannon pioneers
sound and film
connectors with
the M Series
The first commercial and power connectors
Cannon connectors made possible the first
radio microphones, the first black and white
television cameras as well as the first
color television equipment.
Cannon
founded by
James Cannon
Cannon creates
“K” series
connectors for
DC-1’s
The first aviation
circular & rack
panel connectors
developed by
Cannon
Cannon creates
“AN” military
plugs
Cannon originates
the first “D-Sub”
connectors
Cannon develops
the first
Tri-Service
connector, the
mother of modern
day military
spec’s
Cannon pioneers
guided missle
umbilical
connectors
Cannon’s
Cannon’s AF
Firewall connectors X connector is the
first microminiature
used in early
audio connector
DC-3 transports
Cannon develops Cannon establishes
the first “Micro” an aviation milestone
connectors
through the expansion
of Rack and Panel
Cannon partners connectors with the
BKAD/E Series
with technology
leaders to develop
the first complete
fiber optic
systems
Internet deployed
systems
1960
Cannon’s first entry
into the Medical
Electronics market
The
Beginning
1930
Photo courtesy of The Academy of
Motion Pictures, Arts and Sciences.
Power, Film,
Commercial
Aviation
Military
Telecom
Technology
Leadership
Lean
manufacturing
1950
1920
Breakaway
1980
1970
1940
1915
+2000
Space
Medical,
Transportation
Pioneering
technologies
Engineered
solutions
Growth
Chip-on-Flex
PHD
Quadrax
Stacking
Charting
the Future
www.ittcannon.com
NEW TOC:Layout 1
3/26/09
10:34 AM
Page 1
Cannon D Subminiature Accessories
Description
D Subminiature Accessories
Accessory Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
• Metal Backshell
Die Cast Zinc, EMI Shielded Straight Exit . . . . . . . . . . . . . . . . . . . . 4
Metal Backshell Straight Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Metal Backshell 45° Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
• Plastic Backshell
Snap-Together Metalized Plastic, EMI Shielded . . . . . . . . . . . . . . . 9
Locking Hardware for Snap-Together Plastic Backshell . . . . . . . . . 10
Low Cost Metalized Plastic, Straight Exit . . . . . . . . . . . . . . . . . . . 10
Snap-Together Universal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
One-Piece Snap-Together . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
One-Piece Straight Exit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
One-Piece Plastic, 90° Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
• Locking Hardware
Screw Lock Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14
Slide Lock Assemblies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Spring Latch Assemblies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Jackscrew/Jackpot Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
• Guide Pin Plate
Female Guide Pin Plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Male Guide Pin Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
• Connector Saver
High Reliability Connector Saver . . . . . . . . . . . . . . . . . . . . . . . . . 20
• Miscellaneous
Polarizing Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Right Angle Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Wire Hole Fillers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Dust Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Interfacial Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Potting Shell. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Part Number Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Product Safety Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
www.ittcannon.com
Table of Contents
D sub:Layout 1
3/24/09
12:37 PM
Page 2
D Cannon D-Subminiature Accessories
Selection Guide
Locking Hardware
Backshell
Style
EMI Shielded
Snap-Together
Metalized Plastic
Straight Exit
see page 9
EMI Shielded
Snap-Together
Metalized Plastic
50º Exit
see page 9
Female Screw Lock
see page 14
Male Screw Lock
see page 13
Sliding Lock
Retainer
see page 15
Slide Lock Post
see page 15
Spring Latch Plate
see page 16
Spring Latch
see page 16
—
—
—
—
—
—
—
—
—
—
—
—
EMI Shielded
Die Cast Zinc
Metal
see page 4
—
—
—
—
—
Metal
Metal Backshell
45º Exit
see page 4
—
—
—
—
—
—
Metal
Deep Straight
Clamp
see page 7
•
•
•
•
•
•
Metal
Round Cable
Clamp
see page 7
•
•
•
•
•
•
Metal
Short Straight
Clamp
see page 8
•
•
•
•
•
•
Metal
90º Entry
see page 8
•
•
•
•
•
•
Plastic
Snap-Together
Universal
see page 11
•
•
—
—
—
—
Plastic
One-Piece
Snap-Together
see page 11
—
—
—
—
—
Plastic
One-Piece Plastic
Straight Exit
see page 12
—
—
•
•
•
•
Plastic
One-Piece Plastic
90º Exit
see page 12
—
—
•
•
•
•
Supplied with backshell
• Optional compatible locking hardware
— Not compatible
2
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
D sub:Layout 1
3/24/09
12:37 PM
Page 3
D Cannon D-Subminiature Accessories
Selection Guide
Locking Hardware
Jackscrew Assembly
see page 17
Jackpost Assembly
see page 17
Recessed Jackscrew
see page 10
Extended Jackscrew
see page 10
Thumbscrew
see page 10
Jackpost for
In-Line Connections
see page 10
—
—
•
•
•
•
—
—
•
•
•
•
—
—
—
—
—
—
—
—
—
—
—
—
—
•
—
—
—
—
—
•
—
—
—
—
—
•
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
3
D sub:Layout 1
3/24/09
12:37 PM
Page 4
D Cannon D-Subminiature Accessories
Metal Backshell
Die Cast Zinc Backshell, Straight Exit, EMI Shielded
9 and 15
Position
25
Position
A
A
B
D
A
D
F
F
Shell
Part
Size Layout
Number
DE
9
980-2000-345
DA
15
980-2000-346
DB
25
980-2000-347
DC
37
980-2000-348
DD
50
980-2000-349
Specifications
Attenuation:
Temperature Range:
E Dia.
E Dia.
F
• Improves conformance to FCC DOC
#20780 shielding requirements
• No crimp ferrule tooling needed
• Kit consists of 1 front shell, 1 rear shell,
2 screws, 2 hex nuts, 2 mounting screws,
2 end brackets, 1 set of compression
inserts
C
D
E Dia.
Product Features
C
B
B
Die cast metal backshells reduce EMI/RFI emissions. Die cast metal backshells offer improved
shielding in a rugged package.
37 and 50
Position
A
±0,13 (.005)
31,12 (1.225)
39,12 (1.540)
53,09 (2.090)
69,34 (2.730)
66,70 (2.626)
B
±0,13 (.005)
37,21 (1.465)
40,64 (1.600)
39,37 (1.550)
45,72 (1.800)
45,72 (1.800)
C
D
øE
F
±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005)
15,75 (.620) 15,75 (.620) 10,16 (.400) 24,99 (.984)
15,75 (.620) 15,75 (.620) 10,16 (.400) 33,32 (1.312)
17,53 (690) 15,75 (.620) 13,34 (.525) 47,17 (1.857)
21,95 (.864) 15,75 (.620) 18,44 (.726) 63,50 (2.500)
21,95 (.864) 18,54 (.730) 18,44 (.726) 61,11 (2.406)
Materials and Finishes
Backshell Material:
Backshell Finish:
Compression Inserts:
Hardware Material:
Hardware Finish:
-50 dB @ 1000MHz
-20º C to 80º C
Attenuation
Zinc
Clear Zinc
PVC
Steel
Clear Zinc
Diecast Shell Shielding Performance
0
-10
-20
db
-30
-40
-50
-60
-70
100
1000
Mhz
Compression inserts (included with die cast zinc metal backshell)
Compression inserts accommodate a wide variety
of cable sizes.
Position
9,15
25
37,50
Cable Diameter
4,83/8,89 (.190/.350)
4,83/11,68 (.190/.460)
7,62/17,27 (.300/.680)
9 and 15 Position*
25 Position*
1
1
37 and 50 Position*
6
2
2
3
5
3
5
4
3
2
1
4
4
5
* Inserts may be supplied mirror image.
Position
9,15
25
37.50
#1
O.D.
I.D.
12,07 (.475)
8,13 (.320)
15,24 (.600) 11,43 (.450)
16,64 (.655) 14,48 (.570)
#2
#3
#4
O.D.
I.D.
O.D.
I.D.
O.D.
I.D.
9,14 (.360)
8,00 (.315) 9,14 (.360)
6,48 (.255) 9,14 (.360)
7,24 (.285)
11,43 (.450) 10,41 (.410) 11.43 (.450) 9,40 (.370) 11.43 (.450) 7,62 (.300)
17,78 (.700) 15,75 (.620) 20,57 (.810) 16,51 (.650) 16,64 (.655) 12,70 (.500)
4
#5
#6
O.D.
I.D.
O.D.
I.D.
9,14 (.360) 5,33 (.210)
—
—
11.43 (.450) 5,84 (.230)
—
—
16,64 (.655) 10,80 (.425) 16,64 (.655) 8,89 (.350)
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
D sub:Layout 1
3/26/09
7:52 AM
Page 5
Metal Backshell
D Cannon D-Subminiature Accessories
Metal Backshell Straight Exit
The new Cannon Metal Backshells D*FM series for D-Subminiature Connectors offers protection from
magnetic and radio interferences to cable assemblies.
This backshell series is characterized by simple assembly and fit for ndustrial and telecom applications.
Product Features:
• No crimp ferrule tooling needed
• Material: Zinc, blue chromated
• Unique metal filled plastic cable strain relief
guarantees 360° shielding
• RoHS compliant
• -40 - +120°C temperature range
• Corrosion resistant
Part Description
With #4-40 UNC
Jackscew
Part Description
With M3
Jackscrew
Shell
Size
Size 15
A
B
C
D
Cable
Diameter
DEFME-101
DEFMX-101
Size 9
39,55mm [1.555inch]
31,3mm [1.232inch]
14,6mm [0.575inch]
25,0mm [0.984inch]
DAFME-101
DAFMX-101
Size 15
41,7mm [1.642inch]
39,3mm [1.547inch]
14,6mm [0.575inch]
33,3mm [1.311inch]
4 - 9mm
DBFME-101
DBFMX-101
Size 25
49,0mm [1.929inch]
53,5mm [2.106inch]
14,6mm [0.575inch]
47,0mm [1.850inch]
4 - 9mm
DCFME-101
DCFMX-101
Size 37
53,3mm [1.098inch]
69,7mm [2.744inch]
14,6mm [0.575inch]
63,5mm [2.500inch]
4 - 9mm
Kit consists of 1 front shell, 1 rear shell, 4 strain reliefs, 2 mounting crosshead screws, and 2 jack screws.
Assembly instructions Size 9, 15, 25, 37
Attenuation curve
Use two halves of strain relief
(different sizes can be mixed)
Strip cable 18mm and shape
cable to two pigtails
Attach the strain relief around
the cable
Bend cable shielding back on
outside of strain relief
Mount connector and cable into
the backshell
Assemble the other half
(screwing force: 100-120 Ncm)
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
5
4 - 9mm
D sub:Layout 1
4/1/09
10:23 AM
Page 6
D Cannon D-Subminiature Accessories
Metal Backshell
Metal Backshell 45° Exit
The new Cannon Metal Backshells D*FM series for D-Subminiature Connectors offers protection from
magnetic and radio interferences to cable assemblies.
This backshell series is characterized by simple assembly and fit for Industrial and telecom applications.
Product Features:
• No crimp ferrule tooling needed
• Material: Zinc, blue chromated
• Unique metal filled plastic cable strain relief
guarantees 360° shielding
• RoHS compliant
• -40 - +120°C temperature range
• Corrosion resistant
Size 15
Size 50
Part Description
With #4-40 UNC
Jackscew
Part Description
With M3
Jackscrew
Shell
Size
A
B
C
D
Cable
Diameter
DEFME-100
DEFMX-100
Size 9*
37,5mm [1.476inch]
35,5mm [1.398inch]
14,6mm [0.575inch]
DAFME-100
DAFMX-100
Size 15**
41,5mm [1.634inch]
39,5mm [1.555inch]
14,6mm [0.575inch]
33,3mm [1.311inch]
4 - 9mm
4 - 9mm
DBFME-100
DBFMX-100
Size 25**
41,5mm [1.634inch]
53,5mm [2.106inch]
14,5mm [0.571inch]
47,0mm [1.850inch]
4 - 9mm
DCFME-100
DCFMX-100
Size 37**
41,5mm [1.634inch]
70,0mm [2.756inch]
14,5mm [0.571inch]
63,5mm [2.500inch]
4 - 9mm
DDFME-100
DDFMX-100
Size 50***
45,0mm [1.772inch]
67,5mm [2.657inch]
17,4mm [0.69inch]
61,0mm [2.402inch]
13-16mm
*Size 9 Backshell: Kit consists of 1 front shell, 1 rear shell, 4 strain reliefs, 2 mounting crosshead screws, 1 jack screw
**Size 15, 25, 37 Backshell: Kit consists of 1 front shell, 1 rear shell, 4 strain reliefs, 2 mounting crosshead screws, 2 jack screws
***Size 50 Backshell: Kit consists of 1 front shell, 1 rear shell, 1 cable clamp, 4 mounting crosshead screws, 2 jack screws
Assembly instructions Size 9, 15, 25, 37
Attenuation curve
Use two halves of strain relief
(different sizes can be mixed)
Bend cable shielding back on
outside of strain relief
Strip cable 18mm and shape
cable to two pigtails
Attach the strain relief around
the cable
Mount connector and cable into
the backshell
Assemble the other half
(screwing force: 100-120 Ncm)
6
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
D sub:Layout 1
3/24/09
12:37 PM
Page 7
Metal Backshell
D Cannon D-Subminiature Accessories
Metal Backshell
Metal Backshells provide strain relief.
Various profiles available for different cable routing requirements.
Product Features
Materials and Finishes
Backshell Material:
Low Carbon Steel or Brass
Backshell Finish:
Chromate over Cadmium (Mil Spec) or Zinc (RoHS)
Hardware Material:
Steel
Qualified to MIL-Spec M85049
Deep Straight Clamp
E
CABLE ENTRY
IN SHELL
B
H MAX.
G
F
C
A
0,38 ± 0,13
(.015 ± .005)
D MAX.
CABLE ENTRY
IN SHELL
3,45 ± 0,13
(.136 ± .005)
TWO MTG. HOLES
Brass
50 µ in. Gold
over Copper
DE24657-16
DA24658-15
DB24659-15
DC24660-16
DD24661-13
Mil-Spec Parts (Brass)
Shell RoHS Compliant
Mil-Spec
Size
Part Number
Part Number
Part Number
DE
DE24657-29
M85049/48-1-6F
DE24657-5
DA
DA24658-28
M85049/48-1-7F
DA24658-2
DB
DB24659-27
M85049/48-1-8F
DB24659-2
DC
DC24660-27
M85049/48-1-9F
DC24660-11
DD
DD24661-27
M85049/48-1-10F
DD24661-4
• Kit consists of 1 shell, 2 cable clamps,
2 screws, 2 hex nuts.
Shell
Part
Mil Spec
A
B
Size Layout Number Part Number* ±0,38 (.015)
±0,572 (.0225)
DE
9
DE24657 M85049/48-1-1F 30,56 (1.203)
12,484 (.4915)
DA
15
DA24658 M85049/48-1-2F 38,89 (1.531)
12,484 (.4915)
DB
25
DB24659 M85049/48-1-3F 52,78 (2.078)
12,484 (.4915)
DC
37
DC24660 M85049/48-1-4F 69,04 (2.718)
12,484 (.4915)
DD
50
DD24661 M85049/48-1-5F 66,68 (2.625)
15,253 (.6005)
* Parts ordered with no suffix or “Z” suffix will be substituted with “F” suffix.
C
±0,38 (.015)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
max.
14,68 (.578)
14,68 (.578)
14,68 (.578)
14,68 (.578)
17,45 (.578)
E
±0,38 (.015)
9,53 (.375)
18,11 (.713)
25,40 (1.000)
34,93 (1.375)
35,71 (1.406)
F
±0,38 (.015)
9,53 (.375)
7.93 (.312)
7.93 (.312)
7.93 (.312)
10,31 (.406)
G
±0,38 (.015)
19,05 (.750)
19,05 (.750)
25,40 (1.000)
25,40 (1.000)
28,57 (1.125)
H
max.
31,75 (1.250)
31,75 (1.250)
39,70 (1.563)
39,70 (1.563)
42,88 (1.688)
Round Cable Clamp
3,05 ± ,013
(.120 ± .005) DIA.
TWO MTG. HOLES
A
C
E
B
+
+
G
F
D MAX.
CABLE ENTRY
0,38 ± 0,13
(.015 ± .005)
• Kit consists of 1 shell, 2 cable clamps,
2 screws, 2 hex nuts.
Mil-Spec Parts (Brass)
Shell RoHS Compliant
Mil-Spec
Size
Part Number
Part Number
Part Number
DE
DE44994-14
M85049/48-2-6F
DE44994-3
DA
DA20961-26
M85049/48-2-7F
DA20961-3
DB
DB20962-30
M85049/48-2-8F
DB20962-8
DC
DC20963-27
M85049/48-2-9F
DC20963-8
DD
DD20964-32
M85049/48-2-10F
DD20964-8
Shell
Part
Mil Spec
A
B
Size
Layout Number
Part Number*
±0,38 (.015)
±0,572 (.0225)
DE
9
DE44994
M85049/48-2-1F
30,68 (1.208)
12,70 (.500)
DA
15
DA20961
M85049/48-2-2F
38,89 (1.531)
12,70 (.500)
DB
25
DB20962
M85049/48-2-3F
52,78 (2.078)
12,70 (.500)
DC
37
DC20963
M85049/48-2-4F
69,04 (2.718)
12,70 (.500)
DD
50
DD20964
M85049/48-2-5F
66,68 (2.625)
15,47 (.609)
* Parts ordered with no suffix or “Z” suffix will be substituted with “F” suffix.
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
7
C
±0,38 (.015)
24,99 (.984)
33,33 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
max.
10,31 (.406)
10,31 (.406)
15,06 (.593)
18,23 (.718)
20,62 (.812)
E
±0,38 (.015)
16,79 (.661)
24,99 (.984)
38,48 (1.515)
55,14 (2.171)
53,16 (2.093)
Brass
50 µ in. Gold
over Copper
DE44994-2
DA20961-16
DB20962-18
DC20963-17
DD20964-19
F
±0,38 (.015)
3,18 (.125)
3,18 (.125)
4,75 (.187)
6,35 (.250)
7,92 (.312)
G
±0,76 (.030)
26,18 (1.031)
26,18 (1.031)
26,98 (1.062)
26,98 (1.062)
26,98 (1.062)
D sub:Layout 1
3/24/09
12:37 PM
Page 8
D Cannon D-Subminiature Accessories
Metal Backshell
Short Straight Clamp
A
C
B
G
12,30 ± 0,38
(.484 ± .015)
3,05 ± 0,13 (.120 ± .005) DIA.
TWO MTG. HOLES
F
(TYP.)
• Kit consists of 1 shell, 2 or 3 screws,
2 or 3 hex nuts
E
CABLE
ENTRY
0,38 ± 0,13
(.015 ± .005)
Mil-Spec Parts (Brass)
Shell RoHS Compliant
Mil-Spec
Size
Part Number
Part Number
Part Number
DA
DA19678-212
M85049/48-3-7F
DA19678-38
DB
DB19678-213
M85049/48-3-8F
DB19678-53
DC
DC19678-214
M85049/48-3-9F
DC19678-85
DD
DD19678-214
M85049/48-3-10F
DD19678-55
No. of
Shell
Part
Mil Spec
Cable Locking
Size Layout
Number
Part Number* Screws Included
DA
15
DA19678-1 M85049/48-3-2F
2
DB
25
DB19678-2 M85049/48-3-3F
2
DC
37
DC19678-3 M85049/48-3-4F
3
DD
50
DD19678-4 M85049/48-3-5F
3
* Parts ordered with no suffix or “Z” suffix will be substituted with “F” suffix.
A
±0,38 (.015)
38,88 (1.531)
52,78 (2.078)
69,04 (2.718)
66,68 (2.625)
B
±0,38 (.015)
12,70 (.500)
12,70 (.500))
12,70 (.500)
15,47 (.690)
C
±0,13 (.005)
33,33 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
E
±0,38 (.015)
7,51 (.296)
7,51 (.296)
7,51 (.296)
9,91 (.390)
Brass
50 µ in. Gold
over Copper
DA19678-167
DA19678-168
DA19678-138
DA19678-161
F
±0,38 (.015)
7.93 (.312)
20,22 (.796)
17,45 (.687)
17,45 (.687)
G
±0,98 (.035)
16,36 (.644)
16,36 (.644)
16,36 (.644)
17,63 (.694)
90º Entry
#4-40
NC-2B THD.
TWO MTG. HOLES
E
CABLE ENTRY
A
2,77 ± 0,25
(.109 ± .010)
B
F
CABLE
ENTRY
G
H
C
• Kit consists of 1 shell, 1 cable clamp, 1
screw,
1 nut, 2 rivnuts (assembled)
Shell RoHS Compliant
Size
Part Number
DE
DE19977-72
DA
DA19977-68
DB
DB19977-69
DC
DC19977-70
DD
DC19977-71
Shell
Part
Mil Spec
A
Size Layout
Number
Part Number*
±0,38 (.015)
DE
9
DE19977-5
M85049/50-1F
30,56 (1.203)
DA
15
DA19977-1
M85049/50-2F
38,89 (1.531)
DB
25
DB19977-2
M85049/50-3F
52,78 (2.078)
DC
37
DC19977-3
M85049/50-4F
69,04 (2.718)
DD
50
DD19977-4
M85049/50-5F
66,68 (2.625)
* Parts ordered with no suffix or “Z” suffix will be substituted with “F” suffix.
B
±0,38 (.015)
18,24 (.718)
12,70 (.500)
12,70 (.500))
12,70 (.500)
15,47 (.690)
C
±0,13 (.005)
24,99 (.984)
33,33 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
8
Mil-Spec Parts (Brass)
Mil-Spec
Part Number
Part Number
M85049/50-6F
DE19977-20
M85049/50-7F
DA19977-6
M85049/50-8F
DB19977-17
M85049/50-9F
DC19977-18
M85049/50-10F
DD19977-19
E
±0,38 (.015)
11,10 (.437)
11,10 (.437)
11,10 (.437)
11,10 (.437)
14,28 (.562)
F
±0,38 (.015)
11,10 (.437)
11,10 (.437)
15,88 (.625)
20,63 (.812)
23,01 (.906)
Brass
50 µ in. Gold
over Copper
DE19977-47
DE19977-40
DE19977-43
DE19977-45
DE19977-44
G
±0,98 (.035)
11,89 (.468)
11,89 (.468)
11,89 (.468)
11,89 (.468)
13,47 (.531)
H
7,14 (.281)
7,14 (.281)
7,14 (.281)
7,14 (.281)
8,71 (.343)
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
D sub:Layout 1
3/26/09
7:52 AM
Page 9
Plastic Backshell
D Cannon D-Subminiature Accessories
Snap-Together Metalized Plastic
Metalized plastic backshells reduce EMI/RFI emissions. Metalized plastic provides a light weight solution. Includes integral strain relieving cable clamp.
CABLE
CLAMP
CABLE
GROUNDING
TANG
Product Features
• Improves conformance to FCC DOC #20780
shielding requirements
• No crimp ferrule tooling needed
• Quick and simple assembly using snaptogether design feature
• Non-metalized, non-shielded versions available
Attenuation Curve
Note: Cable grounding tang not available on DE size backshell.
Specifications
Attenuation:
Temperature Range:
dB
kHz
MHz
MHz
Materials and Finishes
Material:
Thermoplastic, UL 94V-0 rated
Finish:
Nickel over Copper
-49 dB @ 100MHz
-20º C to 80º C
MHz
Straight Exit
C
• Kit consists of 1 front
shell, 1 rear shell, 1 cable
clamp, 2 screws
• Optional locking hardware
sold separately, see page 10
D
ØH
MAX
E
16,99±0,30
(.669±.012)
A
B
Shell
Comptuer Cable
Size Layout Shielded
Non-Shielded Gray Non-Shielded Black
DE
9 DE121073-154 DE121073-159
DE121073-259
DA
15 DA121073-150 DA121073-155
DA121073-255
DB
25 DB121073-151 DB121073-156
DB121073-256
DC
37 DC121073-152 DC121073-157
DC121073-257
DD
50 DD121073-153 DD121073-158
DD121073-258
Ribbon Cable
Shielded
Non-Shielded Gray
DE121073-164 DE121073-169
DA121073-160 DA121073-165
DB121073-161 DB121073-166
DC121073-162 DC121073-167
-
A
±0,15 (.006)
24,95 (.982)
33,30 (1.311)
47,00 (1.850)
63,45 (2.498)
61,10 (2.410)
B
±0,30 (.012)
30,81 (1.213)
39,09 (1.539)
53,01 (2.087)
69,29 (2.728)
66,90 (2.634)
C
±0,30 (.012)
23,70 (.933)
31,80 (1.252)
45,01 (1.772)
60,30 (2.374)
58,30 (2.295)
D
±0,30 (.120)
16,00 (.630)
16,00 (.630)
16,00 (.630)
16,00 (.630)
19,00 (.748)
E
±0,20 (.008)
35,99 (1.417)
42,00 (1.654)
42,00 (1.654)
42,00 (1.654)
42,00 (1.654)
øH
Max.
7,32 (.288A
8,31 (.327)
10,52 (.414)
12,32 (.485)
13,00 (.512)
50º Exit
D
E
• Kit consists of 1 front shell,
1 rear shell, 1 cable clamp,
2 screws
• Optional locking hardware sold
separately, see page 5
Shell
Shielded
Non-Shielded
B
C
Size Layout
Part #
Part # Gray
±0,30 (.012) ±0,30 (.012)
DE
9
DE121073-54 DE121073-59 35,99 (1.417) 22,00 (8.66)
DA
15
DA121073-50 DA121073-55 44,29 (1.744) 27,31 (1.075)
DB
25
DB121073-51 DB121073-56 57,99 (2.283) 41,00 (1.614)
DC
37
DC121073-52 DC121073-57 74,50 (2.933) 57,51 (2.264)
DD
50
DD121073-53 DD121073-58 72,97 (2.873) 54.99 (2.165)
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
9
D
±0,30 (.012)
16,00 (.630)
16,00 (.630)
16,00 (.630)
16,00 (.630)
19,00 (.748)
E
±0,20 (.008)
35,99 (1.417)
42,01 (1.654)
42,01 (1.654)
42,01 (1.654)
42,01 (1.654)
Cable Diameter
Min.
Max.
3,51 (.138) 7,49 (.295)
6,50 (.256) 8,99 (.354)
6,50 (.256) 11,00 (.433)
6,50 (.256) 11,00 (.433)
8,99 (.354) 13,00 (.512)
D sub:Layout 1
3/24/09
12:37 PM
Page 10
D Cannon D-Subminiature Accessories
Plastic Backshell
Locking Hardware for Snap -Together Plastic Backshell
Recessed Jackscrew
Thumbscrew
Extended Jackscrew
13,50 (.531)
9,00
(.354)
4,50
(.177)
DIA.
19,00 (.748)
4,30
9,00
(.169)
(.354)
#4-40
Threads
6,00
(.236)
MIN.
50,00 (1.969)
4,30 (.169)
#4-40
Threads
9,00 (.354)
6,00 (.236)
#4-40
THREADS
6,00
(.236)
MIN.
4,10
(.161)
DIA.
Materials and Finishes
Part Number
Material
Finish
250-8501-004
250-8501-009 (M3) ,250-8501-010 (#4-40)
250-8501-013
Brass
Brass
Brass
Nickel
Nickel
Nickel
Quantity Required
per Connector
2
2
2
Jackpost for In-Line Connections
Rectangular Nut
Jackpost Assembly
Jackpost
11,00
(.433)
5,00
(.197)
4,60
(.189)
5,00
(.197)
1,81
(.075)
#4-40 UNC-2B
6,00
(.236)
4,90 (.193)
3,00 (.118)
MIN
6,00
(.236)
#4-40 UNC-2B
5,00
(.197)
(ACROSS FLATS)
#4-40 UNC-2A
Assembly consists of 1 rectangular nut,
1 jackpost, 1 # 4-40 lock washer.
Part Number:
Material:
Finish:
Quantity required
per connector:
Straight Exit - Metalized Plastic Low Cost
D121073-19
Brass
Nickel
2
50 POSITION IS MARKED
“CANNON” ONLY
C
F
B
ITT CANNON
ØE
D
• Kit consists of 1 front shell, 1 rear shell,
1 cable clamp, 2 screws
Shell
Size Layout
DE
9
DA
15
DB
25
DC
37
DD
50
Part
Number
980-2000-350
980-2000-351
980-2000-352
980-2000-353
980-2000-354
A
A
B
C
D
øE
F
30,91 (1.217)
39,24 (1.545)
53,09 (2.090)
69,44 (2.734)
67,18 (2.645)
39,29 (1.547)
38,23 (1.505)
42,04 (1.655)
46,48 (1.830)
47,12 (1.855)
16,26 (.640)
16,26 (.640)
18,03 (.710)
23,01 (.906)
23,88 (.940)
16,26 (.640)
16,26 (.640)
16,26 (.640)
16,26 (.640)
19,56 (.770)
10,16 (.400)
10,16 (.400)
13,26 (.522)
18,44 (.726)
18,44 (.726)
24,99 (.984)
33,32 (1.312)
47,17 (1.857)
63,50 (2.500)
61,11 (2.406)
Materials and Finishes: Thermoplastic, UL 94V-0 rated, Nickel plated
10
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
D sub:Layout 1
3/24/09
12:37 PM
Page 11
Plastic Backshell
D Cannon D-Subminiature Accessories
Snap -Together Universal
42,50
(1.673).
B DIA. MAX.
CABLE ENTRY
39,50
(1.555).
C
D
• 2-piece snap-together design for quick
assembly.
• Customer furnishes tie-wrap.
Materials and Finishes
Material:
Black Thermoplastic,
UL 94V-0 rated
Shell
Part
øB
C
D
Size
Layout
Number
max.
±0,20 (.008)
±0,20 (.008)
DE
9
DE115339-20
7,01 (.276)
17,00 (.669)
19,51 (.768)
DA
15
DA115339-21
9,60 (.378)
17,00 (.669)
27,79 (1.094)
DB
25
DB115339-22
11,61 (.457)
17,00 (.669)
41,61 (1.638)
DC
37
DC115339-23
13,00 (.512)
17,00 (.669)
59,99 (2.283)
DD
50
DD115339-24
16,00 (.630)
19,81 (.780)
52,32 (2.060)
Note: Part Numbers above replace the following part number series: DE110963-1 to DD110963-5
One-Piece Snap-Together
A
C
16,21
(.638)
CLAMP,
THERMOPLASTIC
CLAMP,
METAL
• Low cost
• Easy to assemble
• Mounting hardware included
• 2 thumbscrews, 2 cable clamps
Materials and Finishes
Backshell Material:
Polypropylene
Hardware Material:
Steel
Hardware Finish:
Black Nickel
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
Shell
Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Part
Number
DEBS-9
DABS-15
DBBS-25
DCBS-37
DDBS-50
11
∅D
A
35,20 (1.386)
43,31 (1.705)
57,20 (2.252)
72,00 (2.83)
73,70 (2.90)
E
48,00
(1.890)
ITT CANNON
C
24,99 (.984)
33,33 (1.312)
47,04 (1.852)
62,00 (2.44)
63,70 (2.50)
øD
max.
5,69 (.224)
5,69 (.224)
6,50 (.256)
7,80 (.307)
8,20 (.322)
E
27,51 (1.083)
31,19 (1.228)
38,30 (1.508)
43,08 (1.69)
48,04 (1.89)
D sub:Layout 1
3/24/09
12:37 PM
Page 12
D Cannon D-Subminiature Accessories
Plastic Backshell
One-Piece Plastic
Straight Exit
B
• Kit consists of 1 shell, 1 cable clamp,
1 set screw
• Mounting hardware included
• 2 screws #4-24 x 5/16 long self tapping
• Accommodates spring latches
Materials and Finishes
Material:
Black Thermoplastic,
UL 94V-0 rated
Hardware Material:
Steel
Hardware Finish:
Chromate over Zinc
G
Cable Entry
A
C
øE
F
Cable Entry
Cable Entry
D
TWO SCREWS 4-24 X 5/16 long
SELF-TAPPING
Shell
Part
A
B
Size Layout Number ±0,38 (.015) ±0,38 (.015)
DE
9
DE51218 30,94 (1.218) 25,40 (1.000)
DA
15 DA51210 39,27 (1.546) 25,40 (1.000)
DB
25 DB51212 53,16 (2.093) 31,75 (1.250)
DC
37 DC51214 69,44 (2.734) 38,10 (1.500)
DD
50 DD51216 67,06 (2.640) 38,10 (1.500)
C
D
øE
±0,13 (.005) ±0,38 (.015) ±0,25 (.010)
24,99 (.984) 12,70 (.500) 7,14 (.281)
33,33 (1.312) 12,70 (.500) 9,14 (.360)
47,04 (1.852) 12,70 (.500)
—
63,50 (2.500) 12,70 (.500)
—
61,11 (2.406) 15,47 (.690)
—
F
±0,25 (.010)
—
—
12,52 (.493)
17,63 (.694)
18,64 (.734)
G
±0,25 (.010)
—
—
9.15 (.360)
9.15 (.360)
11,89 (.468)
90º Exit
K
Cable Entry
A
øH
Cable Entry
J
B
• Kit consists of 1 shell, 1 cable clamp,
1 set screw
• Mounting hardware included
• 2 screws #4-24 x 5/16 long self tapping
Materials and Finishes
Material:
Black Thermoplastic,
UL 94V-0 rated
Hardware Material:
Steel
Hardware Finish:
Chromate over Zinc
C
Shell
Part
A
B
Size Layout Number ±0,38 (.015) ±0,38 (.015)
DE
9
DE51219 37,95 (1.494) 25,40 (1.000)
DA
15 DA51211 46,28 (1.822) 25,40 (1.000)
DB
25 DB51213 60,15 (2.368) 31,75 (1.250)
DC
37 DC51215 76,43 (3.009) 38,10 (1.500)
DD
50 DD51217 74,04 (2.915) 38,10 (1.500)
12
D
C
D
øH
±0,13 (.005) ±0,38 (.015) ±0,25 (.010)
24,99 (.984) 12,70 (.500) 7,14 (.281)
33,33 (1.312) 12,70 (.500) 9,14 (.360)
47,04 (1.852) 12,70 (.500)
—
63,50 (2.500) 12,70 (.500)
—
61,11 (2.406) 15,47 (.690)
—
J
±0,25 (.010)
—
—
12,52 (.493)
17,63 (.694)
18,64 (.734)
K
±0,25 (.010)
—
—
9.15 (.360)
9.15 (.360)
11,89 (.468)
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
D sub:Layout 1
3/26/09
7:52 AM
Page 13
Locking Hardware
D Cannon D-Subminiature Accessories
Screw Lock Assemblies
ITT offers the largest variety of locking and
latching hardware. Refer to the accessories
selection guide on pages 2-3 for use with
Cannon backshells.
Rear Panel Mount
Front Panel Mount
Product Features
• Ensures positive mating
• Provides locking and latching for high
vibration applications
SCREW
CLIP WITH
THREAD
D SUBMINATURE
CONNECTOR
PIN OR SOCKET
NUT
SCREW
D SUBMINATURE
CONNECTOR
PIN OR SOCKET
CLIP WITH
THREAD
MOUNTING
PANEL
NUT
WASHER
MOUNTING PANEL
LOCK
WASHER
HEX NUT
WASHER
LOCK
WASHER
D SUBMINATURE
CONNECTOR
PIN OR SOCKET
HEX NUT
Male Screw Lock
SCREW
#4-40 UNC-2A THD
A
B
C
CLIP GAP
• Kit consists of 1 screw and 1 clip
• Order 2 per connector
• Similar to M24308/25
Materials and Finishes
Material:
Finish:
Shell
Size
DE, DA, DB, DC
DE, DA, DB, DC
DE, DA, DB, DC
DE, DA, DB, DC
DD
DD
DD
DD
Steel
Trivalent Chromate over Zinc
each
P/N
D20419
D20419-18
D20419-21
D20419-104
D20420
D20420-13
D20420-15
D20420-86
2 each
P/N
D20419-119
D20419-121
D20419-122
D20419-216
D20420-097
D20420-099
D20420-100
D20420-162
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
CLIP
A
±0,38(.015)
14,10 (.555)
14,10 (.555)
14,10 (.555)
14,10 (.555)
16,66 (.656)
16,66 (.656)
16,66 (.656)
16,66 (.656)
B
±0,2 (.010)
6,35 (.250)
7,14 (.281)
7,14 (.281)
7,92 (.312)
6,35 (.250)
7,14 (.281)
7,14 (.281)
7,92 (.312)
13
C
±0,13 (.005)
1,22 (.048)
1,70 (.067)
2,34 (.092)
2,34 (.092)
1,22 (.048)
1,70 (.067)
2,34 (.092)
2,34 (.092)
RoHS Compliant
P/N each
D20419-211
D20419-212
D20419-213
D20419-214
D20420-157
D20420-158
D20420-159
D20420-160
RoHS Compliant
P/N 2 each
D20419-218
D20419-219
D20419-220
D20419-221
D20420-163
D20420-164
D20420-165
D20420-166
D sub:Layout 1
4/1/09
10:23 AM
Page 14
D Cannon D-Subminiature Accessories
Locking Hardware
Female Screw Lock
Rear Panel Mount
Front Panel Mount
6,35 (.250) APPROX.
REMOVE ONE WASHER
FOR EACH 0,76 (.030)
OF PANEL THICKNESS
WHEN REAR MOUNTING
1,52 (0.60) MAX. PANEL
#4-40 NC-2B THD.
4,78 ± 0,38
(.188 ± .015)
Hex across Flats
• Kit consists of 1 nut, 3 washer, 1 lock
washer, 1 hex nut.
• Order 2 per connector.
A
4,78 ± 0,38
(.188 ± .015)
REAR FLANGE (REF.)
#4-40 NC-2A THD
Material:
Finish:
Steel
Chromate over Cadmium (Mil Spec)
or Zinc (RoHS)
Yellow Chromate Over Cadmium
each
Kit of 2 each
D20418-2
D20418-82
D20418-50
D20418-131
D20418-39
D20418-83
D20418-74
D20418-132
Chromate Over Zinc
Kit of 2 each
D20418-128
D20418-129
-
NOTE: (1) A 6 inch/pound (female) and 4 inch/pound (male) maximum torque during assembly is recommended on steel screw
lock assemblies. (2) A third flat washer is supplied for front panel mounting of tab shell connectors.
RoHS Compliant
Part Number
D20418-134
D20418-135
D20418-136
D20418-137
A
± 0,38 (.015)
7,92 (.312)
12,70 (.500)
15,88 (.625)
19,05 (.750)
Mil-Spec
Part Number
M24308/26-1F
M24308/26-2F
-
Screw Locks for Connectors with Integral Threaded Inserts
3,50
(.138)
MIN
THD A
5,75
(.226)
Part
Number
D121073-39
D112041 *
D121073-42
* without lock washer
4,50
(.177)
5,00 (.197) HEX
(ACROSS FLATS)
THD B
3,50 (.138)
MIN
THD A
# 4-40 UNC-2B
# 4-40 UNC-2B
M3
Thread Type
THD B
# 4-40 UNC-2A
# 4-40 UNC-2A
M3
• Kit consists of 1 jackpost, 1 lock washer.
• Order 2 per connector.
Loose Spacer
Part Number: 253-0343-000 (D*M Style)
Dim A
5.84 ± .08 (.230 ± .003)
Part Number: 253-0343-011 (D*MA Style)
9.40 ± .13 (.370 ± .005)
Material:
Finish:
A
.120
.116
Aluminum
Chromate over Cadmium
14
.192
.182
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
D sub:Layout 1
3/26/09
7:52 AM
Page 15
Locking Hardware
D Cannon D-Subminiature Accessories
Slide Lock Assemblies
ITT offers the largest variety of locking and
latching hardware. Refer to the accessories
selection guide on pages 2-3 for use with
Cannon backshells.
#4-40
HEX. NUT
LOCK
WASHER
Product Features
• Ensures positive mating
• Provides locking and latching for high
vibration applications
SLIDE
LATCH
#4-40
SCREW
FLAT
WASHERS
#4-40
POST
LOCK
WASHER
HEX NUT
Sliding Lock Retainer Assembly
2 SCREWS
#4-40 NC-2A THREAD
2,84 (. 112)
3,66 ± 0,38
(.144 ± .015)
RETAINER
SLIDING LOCK
A
2,36 (.093)
TRAVEL REF.
C
B
• Kit consists of 1 sliding lock plate, 2 mounting
screws, 2 lock washer, 2 hex nuts
• Order 1 kit per connector
Descriptions
Sliding Lock
Plate
Screw,
Mounting
Washer Lock
Nut, Hex
Material
Finish/
Treatment
Stainless Steel
Passivated
Steel
Steel
Steel
Trivalent
Chromate over
Zinc
Shell
Size
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
Part
Number
DE51224-1
DA51220-1
DB51221-1
DC51222-1
DD51223-1
Slide Lock Post Assemblies
A
± 0,38 (.015)
35,05 (1.380)
43,70 (1.720)
57,40 (2.260)
73,86 (2.908)
71,47 (2.814)
SPACER
WASHER
B
± 0,38 (.015)
12,70 (.500)
12,70 (.500)
12,70 (.500)
12,70 (.500)
15,47 (.609)
C
± 0,13 (.005)
25,00 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
LOCK WASHER
#4-40
HEX NUT
4,60
(.180) HEX
• Consists of 1 post, 2 washers, 1 lock washer,
and 1 hex nut.1
• Order 2 per connector.2
Part Number:
Each1,2
D53018
D53018-14
Kit of 2 each
D53018-11
D53018-20
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
2,59 (.102)
± 0,13 (.005)
10,57 (.416)
± 0,25 (.010)
Material: Steel, Finish: Chromate/Zinc
Material: Stainless Steel, Finish: Passivated
15
NOTE: When rear-mounting connector to a 1/16”
panel, delete the second spacer washer.
D sub:Layout 1
3/24/09
12:37 PM
Page 16
D Cannon D-Subminiature Accessories
Locking Hardware
Spring Latch Assemblies
ITT offers the largest variety of locking and
latching hardware. Refer to the accessories
selection guide on pages 2-3 for use with
Cannon backshells.
Locked
Unlocked
Product Features
• Low Cost
• Minimizes field connection time
• Positive lock between connectors
• Packaged 2 kits per bag
Materials and Finishes
Material:
Stainless Steel
Treatment:
Passivated
Spring Latch Plate Assembly
#4-40
SCREW
15,37 ± 0,64
(.605 ± .025)
#4-40 THD. x 7,92 (.312)
LONG SCREW
2,41 (.095) 1,52 (.060)
A
B
LATCH PLATE
#4-40 HEX. NUT
CONNECTOR
EITHER PIN OR SOCKET
Shell
Size
DE, DA, DB, DC
DD
Layout
9,15, 25, 37
50
Part
Number
D110278
D110280
A
± 0,38 (.015)
12,42 (.489)
15,47 (.609)
B
± 0,38 (.015)
14,35 (.565)
17,09 (.673)
Part Number
Kit of 2 each
D110278-4
D110280-3
LOCK WASHER
#4-40
HEX NUT
• Kit consists of 1 plate, 1 screw,
1 lock washer,1 hex nut.
• Order 2 kits per connector.
Spring Latch Assembly
SPRING LATCH
15,57 ± 0,64
#4-40
SCREW
#4-40 THD. x 7,92 (.312)
LONG SCREW
(.613 ± .025)
B
A
C
2,41 (.095)
1,52 (.060)
SPRING LATCH
MOUNTING BRACKET
#4-40 HEX. NUT
CONNECTOR
EITHER PIN OR SOCKET
Shell
Size
DE, DA, DB, DC
DD
LOCK WASHER
#4-40
HEX. NUT
Layout
9,15, 25, 37
50
Part
Number
D110277
D110279
A
± 0,38 (.015)
12,42 (.489)
15,47 (.609)
B
± 0,38 (.015)
14,35 (.565)
17,09 (.673)
C
± 0,51 (.020)
18,59 (.732)
18,59 (.732)
Part Number
Kit of 2 each
D110277-2
D110279-3
D110277-4 Rear panel mount version also available
• Kit consists of 1 spring, 1 screw, 1 bracket,
1 lock washer, 1 hex nut.
• Order 2 kits per connector. Front panel mounting.
16
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
D sub:Layout 1
3/24/09
12:37 PM
Page 17
Locking Hardware
D Cannon D-Subminiature Accessories
Jackscrew/Jackpost Assemblies
ITT offers the largest variety of locking and
latching hardware. Refer to the accessories
selection guide on pages 2-3 for use with
Cannon backshells.
Jackscrew Assembly
Jackpost Assembly
HEAD, JACKSCREW
# 2-56 UNC THD
# 4-40 UNC THD
# 4-40 UNC-2B THD
RETAINING
COMPOUND
# 4-40 UNC-2A THD
WASHER,
#4 LOCK
Ø 3,05 (.120)
#4 HEX NUT
STUD, JACKSCREW
FEMALE POST
Ø 3,05 (.120)
Jackscrew Assembly
0,89 (.035)
± 0,13 (.005)
5,59 (.220)
DIA. MAX.
9,40 (.370)
MAX.
1,73 (.068)
MAX.
16,26 (.640)
MAX.
• Kit consists of 2 studs, 2 heads,
1 tube retaining compound (US only)
• Order one kit per connector
Part Number:
Materials and Finishes
Material:
Treatment:
4,57 (.180)
MAX.
D110550
#4-40 UNC
THREAD 5,59 (.220) DIA.
MAX.
Stainless Steel
Passivated
0,64 (.025)
± 0,13 (.005)
Jackpost Assembly
4,75 (.187) HEX
(ACROSS FLATS)
CONNECTOR
ASSY
#4-40 UNC THREAD
5,84 (.230) ± 0,13 (.005)
14,10 (.555)
± 0,13 (.005)
• Kit consists of 2 posts, 2 hex nuts, 2 lock washer
• Order one kit per connector
1,14 (.045)
± 0,13 (.005)
5,59 (.220) MIN.
PERFECT THD.
PANEL 3,18 (.125) MAX.
LOCK WASHER
HEX NUT
Part Number:
Materials and Finishes
Material:
Treatment:
Stainless Steel
Passivated
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
#4-40 UNC THREAD
D110551
NOTE: Jack post is not compatible with rear-panel mount connectors.
17
D sub:Layout 1
3/24/09
12:37 PM
Page 18
Guide Pin Plate
D Cannon D-Subminiature Accessories
Guide Pin Plate
Female
9,60 (.378)
MAX
MOUNTING
PANEL
A
B
E
+
+
• Useful in blind mate applications.
• Kit consists of 1 plate, 2 screws.
• Guide pin inserts for Size 8 cavities for
Combo D® connectors also available. Refer to
Combo D Catalog.
Part
Number
DE111920
DA22214
DB22254
DC22071
DD21961
A
±0,41 (.016)
49,61 (1.953)
57,96 (2.282)
71,63 (2.820)
88,11 (3.469)
85,72 (3.375)
B
±0,13 (.005)
40,08 (1.578)
48,41 (1.906)
62,13 (2.446)
78,59 (3.094)
76,20 (3.000)
F
G
+
1,57
(.062)
6,35 (.250) MAX.
SOLDER POT
EXTENSION
C
D
4,04 (.159)
DIA. MIN.
2 PLACES
MOUNTING HOLE
#4.40 UNC-2B THREAD
(SCREW SUPPORT)
2 PLACES
Plate and Hardware Material: Steel
Plate and Hardware Finish: Chromate over Zinc
Shell
Size Layout
DE
9
DA
15
DB
25
DC
37
DD
50
+
+
F
C
±0,13 (.005)
25,00 (.986)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
61,11 (2.406)
D
±0,13 (.005)
18,65 (.734)
22,81 (.898)
29,67 (1.168)
37,90 (1.492)
36,50 (1.437)
E
F
±0,13 (.005) ±0,13 (.005)
15,27 (.601)
9,52 (.375)
19,43 (.765)
9,52 (.375)
26,29 (1.035) 9,52 (.375)
34,52 (1.359) 9,52 (.375)
33,32 (1.312) 11,10 (.437)
G
±0,41 (.016)
25,40 (1.000)
25,40 (1.000)
25,40 (1.000)
25,40 (1.000)
28,58 (1.125)
1,60 (.063) ±
0,41 ± (.016)
RAD.
4 PLACES
H
J
K
±0,41 (.016) ±0,41 (.016) ±0,41 (.016)
30,58 (1.204) 12,29 (.484) 6,15 (.242)
38,91 (1.532) 12,29 (.484) 6,15 (.242)
51,21 (2.016) 11,91 (.469) 5,94 (.234)
67,49 (2.657) 11,91 (.469) 5,94 (.234)
65,10 (2.563) 14,30 (.563) 7,16 (.282)
Recommended Panel Cutout
K
RADIUS
4,22 ± 0,05
(.166 ± .002)
DIA.
2 PLACES
B
E
3,66 ± 0,13
(.144 ± .005)
DIA.
2 PLACES
+
+
+
F
+
F
+
J
D
H
18
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
D sub:Layout 1
3/24/09
12:37 PM
Page 19
Guide Pin Plate
D Cannon D-Subminiature Accessories
Guide Pin Plate
Male
A
4,78 ± 0,30
(.188 ± 0.12)
6,35 (.250) MAX
SOLDER POT
EXTENSION
B
C
1,57 (.062)
MAX.
D
3,66 ± 0,13
(.144 ± .005)
2 PLACES
ITT CANNON
4,01 (.158)
DIA. MAX.
• Useful in blind mate applications.
• Kit consists of 1 plate, 2 sems screws, 2 rivets,
2 guide pins, 2 washer
• Guide pin inserts for Size 8 cavities for Combo
D® connectors also available. Refer to Combo D
Catalog.
4,06 (.160) REF
DIA MAX.
1,57 ± 0,13
(.062 ± .005)
Part
Number
DE111919
DA22213
DB22255
DC22070
DD21962
A
±0,41 (.016)
49,61 (1.953)
57,96 (2.282)
71,63 (2.820)
88,11 (3.469)
85,72 (3.375)
B
±0,13 (.005)
40,08 (1.578)
48,41 (1.906)
62,13 (2.446)
78,59 (3.094)
76,20 (3.000)
G
4,06 ± 0,25
(.160 ± .010)
C
±0,13 (.005)
33,91 (1.335)
42,24 (1.663)
55,96 (2.203)
72,42 (2.851)
69,82 (2.749)
D
±0,13 (.005)
18,65 (.734)
22,81 (.898)
29,67 (1.168)
37,90 (1.492)
36,50 (1.437)
E
F
G
H
±0,13 (.005) ±0,13 (.005) ±0,41 (.016) ±0,41 (.016)
25,40 (1.000) 19,05 (.750) 25,00 (.984) 12,29 (.484)
25,40 (1.000) 19,05 (.750) 33.32 (1.312) 12,29 (.484)
25,40 (1.000) 19,05 (.750) 47,04 (1.852) 12,29 (.484)
25,40 (1.000) 19,05 (.750) 63,50 (2.500) 12,29 (.484)
28,58 (1.125) 22,20 (.874) 61,11 (2.406) 15,06 (.593)
Recommended Panel Cutout
B
C
K
RADIUS
D
+
F
H
+
+
+
+
3,66 ± 0,13 DIA.
(.144 ± .005)
2 PLACES
+
CL
J
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
E
CL
8,71 ± 0,38
(.343 ± .015)
22,22 ± 0,76
(.875 ± .030)
Plate and Hardware Material: Steel
Plate and Hardware Finish: Chromate over Zinc
Guide Pin Material:
Stainless Steel
Shell
Size Layout
DE
9
DA
15
DB
25
DC
37
DD
50
F
19
5,54 ± 0,13 DIA.
(.218 ± .005)
2 PLACES
J
K
±0,41 (.016) ±0,41 (.016)
30,58 (1.204) 6,15 (.242)
38,89 (1.531) 6,15 (.242)
51,99 (2.047) 6,15 (.242)
68,25 (2.687) 6,15 (.242)
66,93 (2.635) 7,52 (.296)
D sub:Layout 1
3/24/09
12:37 PM
Page 20
D Cannon D-Subminiature Accessories
Connector Saver
High Reliability Connector Saver
Engaging Face, Pin Side
21,95 ± 0,51
(.864 ± .020)
A
B
C
5,97 ± 0,25
(.235 ± .010)
6,17 ± 0,25
(.243 ± .010)
CONTACT
(SOCKET)
2X 11˚
9˚
CONTACT
(PIN)
SHELL
PIN FRONT
SPACER
SHELL
SOCKET FRONT
NOTE: Hardware removed for clarity.
Shell
Size
DE
DA
DB
DC
Layout
9
15
50
37
Part
Number
DEBMAM9PS
DABMAM15PS
DBBMAM25PS
DCBMAM37PS
A
± 0,40 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
± 0,25 (.010)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
C
± 0,25 (.010)
16,92 (.666)
25.25 (.994)
38,96 (1.534)
55,42 (2.182)
DD
50
DDBMAM50PS
66,93 (2.635)
61,11 (2.406)
52,81 (2.079)
Specifications
Temperature: -55º C to 105º C
Current Rating: 7 A
Dielectric withstanding Voltage: 500 VAC at Sea Level
Materials and Finishes
Description
Material
Shells
Steel
Insulator
White Thermoplastic, UL 94V-0
Contacts
Copper Alloy
Locking Hardware
Stainless Steel
20
Finish
Yellow Chromate over Zinc
—
Gold Over Copper
Passivated
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
D sub:Layout 1
3/24/09
12:37 PM
Page 21
D Cannon D-Subminiature Accessories
Miscellaneous
Polarizing Plates
Polarizing Scheme
Material: Black plastic, 94-V-O rated
Part Number
by Shell Size
DE 115398
DA 115398-1
DB 115398-2
DC 115398-3
A
B
1.208 (30.7)
1.535 (39,0)
2.082 (52,9)
2.726 (69,2)
0.629 (16)
0.629 (16)
0.629 (16)
0.629 (16)
DD 115398-3
2.630 (66,8)
0.749 (19)
Polarizing
Keys
Position 1
2
A B C D E F G H
3
4
5
6
7
8
9
10
Cut Key on
pin connector
Right Angle Brackets (Used with 90º Printed Circuit Connector D*M, D*, D*C,/D*U)
Material: Black Polyester, UL-94V-0 Rated
D*/D*M
Shell
Size
DE
DA
DB
DC
Part
Number
015-0338-000
015-0339-000
015-0340-000
015-0341-000
D*C/D*U
DD
015-0342-000
A
± .015
1.224 (31.1)
1.552 (39.4)
2.092 (53.1)
2.740 (69.0)
B
± .005
.984 (24.0)
1.312 (33.3)
1.852 (47.0)
2,500 (63.5)
C
± .010
.340 (8.63)
.340 (8.63)
.340 (8.63)
.340 (8.63)
D
± .010
.484 (12.3)
.484 (12.3)
.484 (12.3)
.484 (12.3)
E
± .010
24.7 (6.27)
24.7 (6.27)
24.7 (6.27)
24.7 (6.27)
F
± .010
.283 (7.2)
.283 (7.2)
.283 (7.2)
.283 (7.2)
2.646 (67.2)
2.406 (61.1)
.395 (10.0)
.594 (15.1)
.302 (7.67)
.283 (7.2)
Shell
Size
DE
DA
DB
DC
Part
Number
015-0348-000
015-0349-000
015-0350-000
015-0351-000
A
± .015
1.224 (31.1)
1.552 (39.4)
2.092 (53.1)
2.740 (69.0)
B
± .005
.984 (24.0)
1.312 (33.3)
1.852 (47.0)
2,500 (63.5)
C
±.010
.340 (8.63)
.340 (8.63)
.340 (8.63)
.340 (8.63)
D
± 010
.484 (12.3)
.484 (12.3)
.484 (12.3)
.484 (12.3)
E
± .010
24.7 (6.27)
24.7 (6.27)
24.7 (6.27)
24.7 (6.27)
F
± .010
.283 (7.2)
.283 (7.2)
.283 (7.2)
.283 (7.2)
DD
015-0352-000
2.646 (67.2)
2.406 (61.1)
.395 (10.0)
.594 (15.1)
.302 (7.67)
.283 (7.2)
Wire Hole Fillers (D*MA Series Only)
Material: Nylon
Part Number
DMA 51236-1
Insert Type
Socket
DMA 51235-1
Pin
Pin
Socket
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
Insert this end first
From Terminal end of Connector
21
Cut Key on socket
connector
D sub:Layout 1
4/10/09
11:43 AM
Page 22
Miscellaneous
D Cannon D-Subminiature Accessories
Dust Cap
RAISED GATE MARK
R. TYP.
6,35 (.250)
A
B
ITT CANNON
XX-XX-XX
C
Dust caps provide protection from moisture
and dust for unused I/O ports.
Product Features
• Dust Caps meet the static decay test
requirements of MIL-B- 81705C, Type II.
• Dust Caps have an integral flange for easy
application and removal
Materials and Finishes
Material:
D
1,02
.04 WALL TYP.
B
NOTE: C dim. applies at point of maximum Integral interface length. Drawing shown for Black Anti-static caps.
Dimensions shown are reference only.
Black Antistatic
Red Caps
(Surface Resistivity
<1x105 ohm/sq)
(Surface Resistivity
I.D.
105-1012 ohm/sq)
Polyethylene
DE-59-20BA
DA-59-20BA
DB-59-20BA
DC-59-20BA
DD-59-20BA
DE-60-20BA
DA-60-20BA
DB-60-20BA
DC-60-20BA
DD-60-20BA
DE-59-20RC
DA-59-20RC
DB-59-20RC
DC-59-20RC
DD-59-20RC
DE-60-20RC
DA-60-20RC
DB-60-20RC
DC-60-20RC
DD-60-20RC
Socket
Socket
Socket
Socket
Socket
Pin
Pin
PIn
Pin
Pin
A
20,32 (.800)
28,45 (1.120)
42,42 (1.670)
58,93 (2.320)
56,90 (2.240)
21,84 (.860)
30,48 (1.200)
44,20 (1.740)
60,71 (2.390)
58,17 (2.290)
B
11,43 (.450)
11,68 (.460)
11,68 (.460)
11,68 (.460)
14,48 (.570)
12,95 (5.10)
12,95 (.510)
13,46 (.530)
13,46 (.530)
16.00 (.630)
C
16,36 (.644)
24,59 (.968)
38,25 (1.506)
54,81 (2.158)
53,11 (2.091)
17,78 (.700)
26,52 (1.044)
39,60 (1.559)
56,90 (2.240)
54,28 (2.137)
D
7,59 (2.99)
7,62 (.300)
7,49 (.295)
7,37 (.290)
10,41 (.410)
8,92 (.351)
9,02 (.355)
9,09 (.358)
9,37 (.369)
12.04 (.474)
Interfacial Seal
10˚ TYP.
A
B
Interfacial seals provide moisture resistance at the
mating interface.
Product Features
• Other Interfacial Seals in the Combo D®
layouts are available upon request.
Material:
Silastic Sheet
0,79 + 0,38 - 0.00
(.031 + .015 - .000)
ø 0,91 +_ 0,18
(.036 +_ .007)
DIA. TYP.
Shell Size
DE
DA
DB
DC
DD
DC
DE
DA
DB
DC
DD
Layout
9
15
25
37
50
21WA4
15
26
44
62
78
Part Number
DE53750
DA53750-1
DB53750-2
DC53750-3
DD53750-4
075-0354-003
273-0333-000
273-0334-000
273-0335-000
273-0336-000
273-0337-000
A
16,66 (.656)
24,99 (.984)
38,88 1.531)
55,14 (2.171)
52,78 (2.078)
55,14 (2.171)
16,66 (.656)
24,99 (.984)
38,88 1.531)
55,14 (2.171)
52,78 (2.078)
B
8,41 (.331)
8,41 (.331)
8,41 (.331)
8,41 (.331)
11,10 (.437)
8,41 (.331)
8,41 (.331)
8,41 (.331)
8,41 (.331)
8,41 (.331)
11,10 (.437)
Potting Shell
15,20
(.600)
+
+
4,70 (.185)
0,76 (.030)
3,25 (.128) DIA.
Potting shells are molded with a thin flange 0,76
(.030) to permit the use of D Subminiature
locking devices.
Materials and Finishes
Material:
Color:
Nylon
Natural (white)
Shell Size
DE
DA
DB
DC
DD
22
Layout
9
15
25
37
50
Part Number
DE50904-1
DA50905-1
DB50906-1
DC50907-1
DD50908-1
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
D sub:Layout 1
3/24/09
12:37 PM
Page 23
Index
D Cannon D-Subminiature Accessories
Standard RoHS
Part #
075-0354-003
250-8501-004
250-8501-009
250-8501-010
250-8501-013
273-0333-000
273-0334-000
273-0335-000
273-0336-000
273-0337-000
980-2000-345
980-2000-346
980-2000-347
980-2000-348
980-2000-350
980-2000-351
980-2000-352
980-2000-353
980-2000-354
D110277
D110278
D110279
D110280
D110550
D110551
D121073-19
D121073-39
D121073-42
D20418-2
D20418-39
D20418-50
D20418-74
D20419
D20419-104
D20419-18
D20419-21
D20420
D20420-13
D20420-15
D20420-86
D53018
DA115339-21
DA121073-150
DA121073-50
DA19678-1
DA19977-1
DA20961
DA22213
Part #
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
D20418-134
D20418-136
D20418-135
D20418-137
D20419-211
D20419-214
D20419-212
D20419-213
D20420-157
D20420-158
D20420-159
D20420-160
Same
Same
Same
Same
DA19678-212
DA19977-68
DA20961-26
Same
Page
#
22
5
5
5
5
22
22
22
22
22
6
6
6
6
12
12
12
12
12
16
16
16
16
17
17
5
14
14
14
14
14
14
13
13
13
13
13
13
13
13
15
11
4
4
10
10
9
19
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
StandardRoHS
Part #
DA22214
DA24658
DA50905-1
DA51210
DA51211
DA51220-1
DA53750-1
DA-59-20
DA-60-20
DABMA15PS
DABS-15
DB115339-22
DB121073-151
DB121073-51
DB19678-2
DB19977-2
DB20962
DB22254
DB22255
DB24659
DB50906-1
DB51212
DB51213
DB51221-1
DB53750-2
DB-59-20
DB-60-20
DBBMA25PS
DBBS-25
DC115339-23
DC121073-152
DC121073-52
DC19678-3
DC19977-3
DC20963
DC22070
DC22071
DC24660
DC50907-1
DC51214
DC51215
DC51222-1
DC53750-3
DC-59-20
DC-60-20
DCBMA37PS
DD115339-24
DD121073-153
Part #
Same
DA24658-28
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
DB19678-213
DB19977-69
DB20962-30
Same
Same
DB24659-27
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
DC19678-214
DC19977-70
DC20963-27
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
23
Page
#
18
9
22
12
12
15
22
22
22
20
11
9
4
4
10
9
10
18
19
9
22
12
12
15
22
22
22
20
11
11
4
4
9
9
9
19
18
7
22
12
12
15
22
22
22
20
11
4
StandardRoHS
Part #
Part #
DD121073-53
DD19678-4
DD19977-4
DD20964
DD21961
DD21962
DD24661
DD50908-1
DD51216
DD51217
DD51223-1
DD53750-4
DD-59-20
DD-60-20
DDBMA50PS
DE111919
DE111920
DE115339-20
DE121073-154
DE121073-54
DE19977-5
DE24657
DE44994
DE50904-1
DE51218
DE51219
DE51224-1
DE53750
DE-59-20
DE-60-20
DEBMA9PS
DEBS-9
Same
Same
Same
DD20964-32
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
Same
DE19977-72
DE24657-29
DE44994-14
Same
Same
Same
Same
Same
Same
Same
Same
Same
Page
#
4
10
10
9
18
19
9
22
12
12
15
22
22
22
20
19
18
11
4
4
10
9
9
22
12
12
15
22
22
22
20
11
D sub:Layout 1
3/24/09
12:37 PM
Page 24
Product Safety and Warranty
1. M ATER IAL CO NTEN T AND P H YS IC AL
F OR M
Electrical connectors do not usually contain
hazardous materials. They contain conducting and non-conducting materials and can
be divided into two groups.
a) Printed circuit types and low cost audio
types which employ all plastic insulators and
casings.
b) Rugged, Fire Barrier and High Reliability
types with metal casings and either natural
rubber, synthetic rubber, plastic or glass
insulating materials. Contact materials vary
with type of connector and also application
and are usually manufactured from either:
Copper, copper alloys, nickel, alumel,
chromel or steel. In special applications,
other alloys may be specified.
2. F IRE CH AR ACTE RISTIC S AND E LEC TRIC
SH OC K HAZAR D
Th er e i s n o fi r e h a za r d w he n t he c o nn e ct o r i s co rr ec t ly w ir ed a nd us ed w i th i n t he
s pec if ie d pa r a me te rs . In c or re ct w ir i ng o r
a ss em bl y o f t he c o nn e ct or or c a re le ss u se
o f me t al t o o ls o r co n duc t iv e fl u ids , o r
t r a n s i t d a m a g e t o an y o f t h e c o m p o n e n t
p a r t s m a y c au s e e l e c t r i c s h o c k o r b u r n s .
L i v e ci r cu i t s m u s t n o t b e b r o k e n b y s e p a r a t i n g m a t e d c o n n e c to r s a s t h i s m a y
c a us e a r ci n g, i on i za t io n a n d bu rn i ng . Heat
dissipation is greater at maximum resistance
in a circuit. Hot spots may occur when resistance is raised locally by damage, e.g. cracked
or deformed contacts, broken strands of
wire. Local overheating may also result from
the use of the incorrect application tools or
from poor quality soldering or slack screw
terminals. Overheating may occur if the ratings in the product Data Sheet/Catalog are
exceeded and can cause breakdown of insulation and hence electric shock. If heating is
allowed to continue it intensifies by further
increasing the local resistance through loss
of temper of spring contacts, formation of
oxide film on contacts and wires and leakage
currents through carbonization of insulation
and tracking paths. Fire can then result in
the presence of combustible materials and
this may release noxious fumes. Overheating
may not be visually apparent. Burns may
result from touching overheated components.
3. HAN DL I NG
Care must be taken to avoid damage
to any component parts of electrical connectors during installation and use. Although
there are normally no sharp edges, care
must be taken when handling certain components to avoid injury to fingers. Electrical
connectors may be damaged in transit to the
customers, and damage may result in creation of hazards. Products should therefore
be examined prior to installation/use and
rejected if found to be damaged.
4. DI SP OS AL
Incineration of certain materials may release
noxious or even toxic fumes.
5. AP P L IC ATION
Connectors with exposed contacts should
not be selected for use on the current supply
side of an electrical circuit, because an electric shock could result from touching
exposed contacts on an unmated connector.
Voltages in excess of 30 V ac or 42.5 V dc are
potentially hazardous and care should be
taken to ensure that such voltages cannot be
transmitted in any way to exposed metal
parts of the connector body. The connector
and wiring should be checked, before making live, to have no damage to metal parts or
insulators, no solder blobs, loose strands,
conducting lubricants, swarf, or any other
undesired conducting particles. Circuit
resistance and continuity check should be
made to make certain that there are no high
resistance joints or spurious conducting
paths. Always use the correct application
tools as specified in the Data Sheet/Catalog.
Do not permit untrained personnel to wire,
assemble or tamper with connectors. For
operation voltage please see appropriate
national regulations.
IM P OR TANT G ENERAL INF ORMATION
(i ) Air an d c re epa g e pa t h s/Op er at i ng v o lt a g e . The admissible operating voltages
depend on the individual applications and
the valid national and other applicable safety regulations.
For this reason the air and creepage path
data are only reference values. Observe
reduction of air and creepage paths due to
PC board and/or harnessing.
(i i ) Tem pe ra t ur e
All information given are temperature limits.
The operation temperature depends on the
individual application.
( i i i ) O th e r i m p o r t a nt i n f o r m a ti o n
Cannon continuously endeavors to improve
their products. Therefore, Cannon products
may deviate from the description, technical
data and shape as shown in this catalog and
data sheets.
P r od uc t War ra n ty
A limited warranty applies to Cannon products. In general, except for obligations
assumed by Cannon under this warranty,
Cannon shall not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether or not
based on express or implied warranty, contract, negligence or strict liability arising in
connection with the design, manufacture,
sale, use or repair of the products. Product
availability, prices and delivery dates are
exclusively subject to our respective order
confirmation form; the same applies to
orders based on development samples delivered. Please refer to www.ittcannon.com
(General Terms of Sale) for the complete text
of Cannon’s applicable Terms and
Conditions, including Warranty.
This publication is not to be construed as an
offer. It is intended merely as an invitation to
make an offer. By this publication, Cannon
does not assume responsibility or any liability for any patent infringements or other
rights of third parties which may result from
its use.
Reprinting this publication is generally permitted, indicating the source. However,
Cannon's prior consent must be obtained in
all cases. “Engineered for life” is a registered
trademark of ITT Corporation ©2006. All
other trademarks or registered trademarks
are property of their respective owners. All
dates subject to change without notice.
Commodities in this catalog may be
controlled for export by the International
Traffic in Arms Regulations (ITAR) and Export
Administration Regulations (EAR) when
specifically designed modified, or configured
for articles controlled by the United States
Government.
ITT Interconnect Solutions, a Division of ITT
Corporation manufactures the highest quality products available in the marketplace;
however these products are intended to be
used in accordance with the specifications in
this publication. Any use or application that
deviates from the stated operating specifications is not recommended and may be
unsafe. No information and data contained
in this publication shall be construed to create any liability on the part of Cannon. Any
new issue of this publication shall automatically invalidate and supersede any and all
previous issues.
24
www.ittcannon.com
D sub:Layout 1
D
3/24/09
12:37 PM
Page 25
Circular/Filter/Hermetic/Fiber Optic Connectors
As a world leader in circular, filter, and hermetic connectors, ITT can
leverage its design and manufacturing expertise to fit virtually any
application. Our expertise includes fast positive mating for a wide
range of military applications, as well as numerous sizes and
contact configurations for various harsh environments. Our wide
variety of fiber optic products include hybrid contacts, multi-channel,
rack and panel, and hi-rel assemblies, including MIL and ARINC
standard solutions.ITT can meet numerous specs, including
NATO and MIL standards.
www.ittcannon.com/circulars • www.ittcannon.com/filter • www.ittcannon.com/hermetics • www.ittcannon.com/fiberoptics
D-Subminiature Connectors
Cannon invented D-sub connectors in 1952. Our family
of D-Subs now includes combinations of signal, power and RF, as
well as severe service sealed connectors. Cannon D-Subs are
available with an extensive line of backshells and accessories and
are one of the most economical shielded connector solutions
available. ITT D-Sub connectors are qualified to the MIL-DTL24308 specification.
www.ittcannon.com/dsubs
Microminiature Connectors
Developed first by Cannon in the 1960’ s, Interconnect Solutions
microminiature connectors offer high performance and reliability
with exceptional versatility. Available in rectangular, circular,
and strip configurations for countless applications, many of our
connectors meet or exceed applicable requirements of the MILDTL-83513 specification.
www.ittcannon.com/micro
Rack and Panel Connectors
Initially pioneered by Cannon during the 1930s, Interconnect
Solutions is the world leader in rack and panel connectors, offering
unmatched variety of shell configurations and insert arrangements,
materials, plating, and contact options. Many of our standard and
custom designs meet the stringent requirements of ARINC 600,
ARINC 404 (MIL-C-81659), and MIL-DTL-83733 standards.
www.ittcannon.com/rackandpanel
RF Connectors
ITT Interconnect Solutions has been providing interconnect
products to the Microwave and RF industry since 1963 (formerly
The Sealectro Corporation). The RF 50 & 75 Ohm product lines
cover UHF band through Ku band requirements. These connectors
and cable assemblies are available with a thread type, snap type,
bayonet type or slide on coupling method. The frequencies range
from DC to 18+ GHz.
www.ittcannon.com/RF50 • www.ittcannon.com/RF75
Transportation
The ITT ICS interconnect range includes sealed circular and rectangular
connectors in metal or plastic shells. These configurations include board to
cable or cable to cable/ bulkhead applications. Both signal and power contacts can be combined in various layouts. All product lines within the
Transportation segment offer very low contact resistance providing maximum signal integrity.
www.ittcannon.com/transportation
ITT Interconnect Solutions is an international manufacturer and supplier of connectors
including circular, rectangular, fiber optic, RF, power and high voltage, audio, PMCIA,
Compact Flash Card, enclosures, cable assemblies, and application specific custom
solutions. The Interconnect Solutions portfolio includes the brands Cannon, VEAM, and
BIW. As a worldwide leader in connector technology for nearly a century, ITT offers one
of the broadest product offerings, six sigma manufacturing capability, Value Based
Product Development with exceptional engineering capability, and an extensive sales,
distribution, and customer support network.
D sub:Layout 1
3/24/09
12:37 PM
Page 26
Customer Support Locations
CHINA
Tuopandun Industrial Area, Jinda Cheng,
Xiner Village, Shajing Town,
Baoan District, Shenzhen City,
Guangdong, China 518125
phone: +86.755.2726.7238
fax:
+86.755.2726.7515
GERMANY
Cannonstrasse 1
Weinstadt, 71384
phone: +49.7151.699.0
fax:
+49.7151.699.217
FRANCE
15, Boulevard Robert Thiboust
Serris, France 77700
phone: +33.1.60.04.93.93
fax:
+33.1.60.04.93.90
HONG KONG
Units 2405-6, 24/F, ING Tower
308 Des Voeux Road
Central
Hong Kong
phone: +852.2732.2720
fax:
+852.2732.2919
ITALY
Corso Europa 41/43
Lainate (MI), Italy 20020
phone: +39.02938721
fax:
+39.0293872300
JAPAN
11-3, 5 Chome,Hibarigaoka, Zama-shi
Kanagawa, Japan 228-0003
phone: +81.462.57.2010
fax:
+81.462.57.1680
UK
Jays Close, Viables Estate
Basingstoke, RG22 4BA
phone: +44.1256.311200
fax:
+44.1256.323356
USA
666 East Dyer Road
Santa Ana, CA 92705
toll free: 1.800.854.3028
phone: +1.714.557.4700
fax:
+1.714.628.2142
©2008 ITT Corporation. “Engineered for life” and “Cannon” are registered trademarks of
ITT Corporation. Specification and other data are based on information available at the
time of printing, and are subject to change without notice.
www.ittcannon.com