Ceramic Ball Grid Termination Arrays CHC Series • Superior TaNFilm® resistors on ceramic substrate • High density networks on a reduced footprint • Excellent high frequency performance • Standard tolerances to ±1% • RoHS compliant terminations available High purity alumina substrate Ball grid terminations IRC’s Chipscale on ceramic CHC offers high performance terminal solutions in a small surface mount package. Sn/Pb solder balls placed on a ceramic substrate permit very low parasitic inductance and capacitance. This improves speeds, lowers propagation delays, and reduces ground bounce. IRC’s proven tantalum nitride thin film technology can handle the most demanding applications. For all of your high density, small footprint termination needs, use IRC’s CHC Termination arrays. Electrical Data Package CB0565A CB0565B CD0865A CD0865B CD1065A CD1065B CC0910A CC0910B CD0910A CD0910B Resistance Range (Ω) Absolute Tolerances 10R to 4.7K ±1%, ±2% 10R to 10.0K ±5% 10R to 2.2K ±1%, ±2% 10R to 4.7K ±5% 10R to 4.7K ±1%, ±2% 10R to 10.0K ±5% 10R to 2.2K ±1%, ±2% 10R to 4.7K ±5% 10R to 4.7K ±1%, ±2% 10R to 10.0K ±5% 10R to 2.2K ±1%, ±2% 10R to 4.7K ±5% 10R to 4.7K ±1%, ±2% 10R to 10.0K ±5% 10R to 2.2K ±1%, ±2% 10R to 4.7K ±5% 10R to 4.7K ±1%, ±2% 10R to 10.0K ±5% 10R to 2.2K ±1%, ±2% 10R to 4.7K ±5% Absolute TCR Package Power Element Power Rating 70°C* Rating 70°C* ±100ppm/°C 0.6W ±100ppm/°C 1.2W ±100ppm/°C 1.6W ±100ppm/°C 1.2W ±100ppm/°C 1.2W 0.1W Operating Temperature -40°C to +85°C *Rated power is from 0°C to 70°C derated linearly to 0W at 85°C. General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com A subsidiary of TT electronics plc CHC Series Issue April 2009 Sheet 1 of 4 Ceramic Ball Grid Termination Arrays Return Loss Data (50Ω Nominal) Average return loss for 0.65mm pitched bussed schematic for elements away from reference pins. For example: CB0565B, reference pins are A3 or B3 Average return loss for 1mm pitched bussed schematic respect to reference pin. Where reference pins are B1 to B9 referring to CC0910B schematic. 0 5 5 10 10 15 15 Magnitude (-dB) Magnitude (-dB) 0 20 25 30 35 20 25 30 35 40 40 45 45 50 50 0 5 10 15 20 25 30 35 0 40 2 4 6 Frequency (GHz) Typical Return Loss For CC0910B-01-50R0-F 8 10 Frequency (GHz) 14 12 16 18 20 Typical Return Loss For CD1065B-01-50R0-F Eye Diagram Data Ideal Terminator IRC CHC-CC0910B-01-50R0-F Terminator 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 zs1 zs1 Impedance Response Data 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 Time, nsec Ideal 50Ω Terminator Impedance response to 100psec rising edge © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Time, nsec 0.8 0.9 1.0 1.1 1.2 IRC CHC-CC0910B-01-50R0-F Terminator Impedance response to 100psec rising edge CHC Series Issue April 2009 Sheet 2 of 4 Ceramic Ball Grid Termination Arrays Environmental Data Environmental Test Specification Typical Maximum Thermal shock MIL-PRF-83401 ±0.01% ±0.02% Low temperature operation MIL-PRF-83401 ±0.01% ±0.05% Short time overload MIL-PRF-83401 ±0.01% ±0.05% High temperature exposure MIL-PRF-83401 ±0.03% ±0.05% Effects of solder MIL-PRF-83401 ±0.01% ±0.05% MIL-STD-202, Method 206 65°C, 45% RH, with bias ±0.02% ±0.01% MIL-PRF-83401 ±0.01% ±0.02% Moisture resistance Life Physical Data and Schematic Diagrams for 1.0mm Pitch Series A A B B C C 0.64mm ±0.05 diameter solder bumps 9.00mm ±0.15mm 1.00mm ±0.25mm 1.00mm ±0.25mm 4.0mm ±0.15mm D D 1 2 3 4 5 6 7 8 1 9 CD0910A isolated schematic (view from top) 2 3 4 5 6 7 8 9 1 CD0910B bussed schematic (view from top) A A B B C 2 3 0.50mm ±0.25mm 4 5 6 7 8 9 0.63mm ±0.1mm 1.27mm ±0.16mm 0.64mm ±0.05 diameter solder bumps 9.00mm ±0.15mm 1.00mm ±0.25mm 1.00mm ±0.25mm 3.0mm ±0.15mm C 1 2 3 4 5 6 7 8 9 CC0910A isolated schematic (view from top) 1 2 3 4 5 6 7 8 CC0910B bussed schematic (view from top) 9 1 2 3 4 5 6 7 8 0.50mm ±0.25mm 9 1.27mm ±0.16mm 0.63mm ±0.1mm Note: Contact A1 indicator marked with dot on top of part. Coplanarity between solder bumps 0.06mm. © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com CHC Series Issue April 2009 Sheet 3 of 4 Ceramic Ball Grid Termination Arrays Physical Data and Schematic Diagrams for 0.65mm Pitch Series A A 0.65mm B B C C 0 D 2 3 4 5 6 7 8 9 10 1 CD1065A isolated schematic (view from top) 2 3 4 5 6 7 8 9 10 CD1065B bussed schematic (view from top) A D B B A 10 A 2 3 4 5 10 0.64mm ±0.1mm 0.38mm ±0.1mm 30 35 5.1mm ±0.1mm 0.35mm diameter solder bumps 0.65mm 50 2 D 4 6 8 10 14 0.65mm 12 Frequency (GHz) C C 9 25 0 C 8 20 40 B 7 6 0.275mm ±0.1mm 45 B 2.5mm ±0.1mm A 1 15 Magnitude (-dB) 1 D 0.35mm diameter solder bumps Average return loss for 0.65mm pitched bussed schematic for elements 0.65mmaway from reference pins. C CB0565B, reference pins are A3 or B3 For example: C 5 D 6.4mm ±0.1mm 16 18 20 2.5mm ±0.1mm B A D D 1 2 3 4 5 6 7 8 CD0865A isolated schematic (view from top) 1 2 3 4 5 6 7 CD0865B bussed schematic (view from top) 8 1 2 4 3 5 7 6 8 0.643mm ±0.1mm 0.275mm ±0.1mm 0.381mm ±0.1mm 3.2mm ±0.1mm A A B B 0.35mm diameter solder bumps 0.65mm B 1 2 3 4 5 CB0565A isolated schematic (view from top) CB0565B bussed schematic (view from top) 0.65mm A 1 2 3 4 5 0.275mm ±0.1mm 1.2mm ±0.1mm 0.64mm ±0.1mm 0.38mm ±0.1mm Note: Contact A1 indicator marked with dot on top of part. Coplanarity between solder bumps 0.06mm. Ordering Data Prefix CHC - CD0865 A - 01 - 51R1 - J Model CB0565 = 2 × 5, 0.65mm pitch array CD0865 = 4 × 8, 0.65mm pitch array CD1065 = 4 × 10, 0.65mm pitch array CC0910 = 3 × 9, 1.0mm pitch array CD0910 = 4 × 9, 1.0mm pitch array Schematic A = Isolated schematic with 60/40 Sn/Pb (0.65mm pitch) or 90/10 Sn/Pb (1.0mm pitch) terminations ALF = Isolated schematic with RoHS compliant terminations B = Bussed schematic with 60/40 Sn/Pb (0.65mm pitch) or 90/10 Sn/Pb (1.0mm pitch) terminations BLF = Bussed schematic with RoHS compliant terminations Absolute TCR Code 01 = ±100ppm/°C Four Digit Resistance Code Standard resistance values 10R0 = 10Ω; 15R0 = 15Ω; 22R0 = 22Ω; 33R0 = 33Ω; 47R0 = 47Ω; 50R0 = 50Ω; 51R1 = 51.1Ω; 75R0 = 75Ω; 1000 = 100Ω; 1001 = 1.00KΩ; 1002 = 10.0KΩ; 2201 = 2.20KΩ; 4701 = 4.70KΩ Absolute Tolerance Code J = ±5%; G = ±2%; F = ±1% © IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com CHC Series Issue April 2009 Sheet 4 of 4