General Purpose Relays Industrial Relays SCHRACK Multimode Relay MT n n n n n n 2/3 pole 10A, 2 form C (CO) or 3 form C (CO) contacts DC and AC coils Mechanical indicator as standard Electrical indicator New test system with front operated finger protected push-to-test button and integral locking test tab White write on panel Typical applications Mechanical engineering, plant control F0161-B VZ Approvals Contact Data (continued) VDE REG.-Nr. 6182, UL E214025 Mechanical endurance DC coil AC coil Technical data of approved types on request Contact Data Contact arrangement 2 form C (CO) or 3 form C (CO) Rated voltage 240VAC Max. switching voltage 400VAC Rated current 10A 10A 4A Limiting making current, max. 20ms 20A 20A 8A Limiting breaking current 10A 10A 4A Switching power 2500VA 2500VA 500 VA Contact material AgNi90/10 AgNi90/10 AgNi90/10 gold plated gold plated Contact style single single bifurcated contact contact contact Min. recommended contact load 12V 20mV 20mV at 10mA at 1mA at 1mA Initial voltage drop 30mV at 100mA/6VAC/1kHz Frequency of operation, with/without load 1200/6000h-1 Operate time max., DC coil 15ms Release time max., DC coil 10ms Bounce time max., DC coil, form A/form B 4/5ms Contact ratings Type Contact IEC 61810 MT22 DC coil C (CO) MT22 AC coil C (CO) MT32 DC coil C (CO) MT32 AC coil C (CO) MT2 C (CO) MT2 A (NO)/B (NC) MT2 C (CO) MT3 C (CO) UL 508 MT3 A (NO)/B (NC) MT3 C (CO) 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Load Cycles 10A, 250VAC, cosφ=1, 35°C 100x103 10A, 250VAC, cosφ=1, 35°C 20x103 10A, 250VAC, cosφ=1, 35°C 100x103 10A, 250VAC, cosφ=1, 35°C 20x103 10A, 250VAC, resistive, 40° 30x103 B300 40°C 6.000 4A, 25VAC, resistive, bifurcated, 40°C 30x103 10A, 250VAC, resistive, 40°C 30x103 B300, 40°C 6.000 4A, 25VAC, resistive, bifurcated, 40°C 30x103 Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Coil Data Coil voltage range Operative range, IEC 61810 Coil insulation system according UL Coil versions, DC coil Coil code Rated Operate STD PD3) voltage voltage VDC VDC 006 0A6 6 4.5 012 0B2 12 9.0 024 0C4 24 18.0 048 0E8 48 36.0 060 0G0 60 45.0 110 1B0 110 82.5 220 2C0 220 165.0 20x106 operations 20x106 operations 6 to 220VDC 6 to 230VAC 2 class 130 (B) Release voltage VDC 0.6 1.2 2.4 4.8 6.0 11.5 22.0 Coil Rated coil resistance power Ω±10%1)2) W 32 1.1 110 1.3 475 1.2 2000 1.2 2850 1.3 100001) 1.2 400002) 1.2 1) Coil resistance ±12%, 2) Coil resistance ±15% 3) Protection diode PD; standard polarity: 2-pole relays: +2 / -7, 3-pole relays: +2 / -10 All figures are given for coil without pre-energization, at ambient temperature +23°C Coil versions, AC coil, 50/60Hz Coil Rated Operate Release Coil code voltage voltage voltage resistance 50/60Hz 50/60Hz VAC VAC VAC Ω±10%1) 006 6 4.8/5.1 1.8 5.3 012 12 9.6/10.2 3.6 24 024 24 19.2/20.4 7.2 86 048 48 38.4/40.8 14.4 345 060 60 48.0/51.0 18.0 544 115 115 92.0/97.8 34.5 2000 230 230 184.0/195.5 69.0 83001) Rated coil power 50/60Hz VA 2.29/1.98 2.19/1.86 2.26/1.95 2.28/1.97 2.27/1.96 2.37/2.00 2.32/1.96 1) Coil resistance ±12% All figures are given for coil without pre-energization, at ambient temperature +23°C Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 General Purpose Relays Industrial Relays SCHRACK Multimode Relay MT (Continued) Insulation Data Other Data Initial dielectric strength between open contacts between contact and coil between adjacent contacts Clearance/creepage between contact and coil between adjacent contacts Material group of insulation parts 1500Vrms 2500Vrms 2500Vrms ≥2.8/4mm ≥2.8/4mm IIIa Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature DC coil -40 to +60°C AC coil -40 to +50°C Category of environmental protection IEC 61810 RTI - dust protected Vibration resistance (functional), form A (NO)/form B (NC) 5/2g Shock resistance (functional), form A (NO)/form B (NC) 50/10g Terminal type plug-in Cover retention, pull/push force 100/100N Weight 80g Packaging unit 25 pcs. Accessories For details see datasheet Accessories Multimode Relay MT Note: indicated contact ratings and electrical endurance data for direct wiring of relays (according IEC 61810-1); for relays mounted on sockets deratings may apply. Terminal assignment Dimensions Bottom view on pins S0168-B 2 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. S0296-A Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. General Purpose Relays Industrial Relays SCHRACK Multimode Relay MT (Continued) Product code structure Typical product code MT 3 2 6 230 Type MT Multimode Relay MT Contact configuration 2 2 form C contacts (2 CO contacts), 8-pin Contact material 2 AgNi 90/10 3 AgNi 90/10, gold plated Version 1 DC with test button 3 DC with test button and bipolar LED Coil Coil code: please refer to coil versions table 3 3 form C (3 CO contacts), 11-pin B AgNi 90/10 bifurcated contacts, gold plated 6 8 AC with test button AC with test button and LED Other types on request Product code Contact configuration Contact material Version MT221012 2 form C AgNi 90/10 DC MT221024 2 CO contacts with test button MT221048 8-pin MT221060 MT221110 MT221220 MT223024 DC+LED+test button MT226012 AC MT226024 test button MT226048 MT226115 MT226230 MT228024 AC+LED MT228115 test button MT228230 MT321012 3 form C AgNi 90/10 DC MT321024 3 CO contacts with test button MT321048 11-pin MT321060 MT321110 MT321220 MT323024 DC+LED+test button MT3230C4 DC+LED+PT+TB MT326012 AC MT326024 test button MT326048 MT326115 MT326230 MT328024 AC+LED MT328115 test button MT328230 MT331024 AgNi 90/10 DC MT331110 gold plated with test button MT331220 MT333024 DC+LED+test button MT3330C4 DC+LED+PD+TB MT333110 DC+LED MT333220 test button MT336115 AC MT336230 test button MT338024 AC+LED MT338115 test button MT338230 04-2011, Rev. 0411 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Coil 12VDC 24VDC 48VDC 60VDC 110VDC 220VDC 24VDC 12VAC 24VAC 48VAC 115VAC 230VAC 24VAC 115VAC 230VAC 12VDC 24VDC 48VDC 60VDC 110VDC 220VDC 24VDC 24VDC 12VAC 24VAC 48VAC 115VAC 230VAC 24VAC 115VAC 230VAC 24VDC 110VDC 220VDC 24VDC 24VDC 110VDC 220VDC 115VAC 230VAC 24VAC 115VAC 230VAC Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Part number 4-1393090-9 5-1393090-0 5-1393090-1 5-1393090-2 5-1393090-3 5-1393090-4 5-1393090-7 6-1393090-3 6-1393090-4 6-1393090-5 6-1393090-7 6-1393090-8 6-1393090-9 7-1393090-0 7-1393090-1 6-1393091-8 7-1393091-0 7-1393091-1 7-1393091-2 7-1393091-4 7-1393091-7 8-1393091-4 7-1393091-9 9-1393091-6 9-1393091-7 9-1393091-8 1393092-1 1393092-2 1393092-4 1393092-7 1393092-8 1-1393092-1 1-1393092-3 1-1393092-5 1-1393092-8 1-1393092-6 2-1393092-0 2-1393092-2 2-1393092-5 2-1393092-6 2-1393092-7 8-1415025-1 2-1393092-8 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 3