SUNON SPECIFICATION FOR APPROVAL CUSTOMER : DESCRIPTION : AXIAL AC FAN DIMENSIONS : ø172X51 mm MODEL : A2175-HBL TC.R APPROVED NO : (AUTHORIZED) APPROVED BY DAWN. Chiahui 6/22 CHKD. Kiddy : APPD. Winner SPEC. NO. ISSUE DATE EDITION REVISE DATE E.SPEC A170028 06.22.2001 0 EA17006 建準電機工業股份有限公司 SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. 12FL., 120 CHUNG CHENG 1ST RD., TEL:886-7-7163069(41 LINES) KAOHSIUNG, TAIWAN, R. O. C. FAX:886-7-7163086~89 SUNON MODEL NUMBERING SYSTEM A 2 17 5 H B L FAN SERIES A : AC FAN VOLTAGE 1 : 115VAC 2 : 220~240VAC TERMINAL FRAME SIZE T : TERMINAL L : LEAD WIRE 17 : 172mm BEARING SYSTEM FAN THICKNESS B : BALL S : SLEEVE 3 : 38mm 5 : 51mm SPEED H : HIGH M: MIDDLE L : LOW T C Capacitor R Round Frame Thermal Cutout SPEC. NO. A170028 REVISE DATE 建準電機工業股份有限公司 ISSUE DATE 06. 22. 2001 E D I T I O N SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. P A G E 1 OF 7 0 SUNON AXIAL AC FAN MODEL : A2175-HBL TC.R CHARACTERISTICS 1. Motor Design : Reliable Alveolate Motor Construction. 2. Insulation Resistance : 500Megohms minimum at 500 VAC. 3. Dielectric Strength : 1500 VAC for one minute. 4. Motor Protection : Thermal protected & Class B (II) 5. Noise Level : Measured in a semi-anechoic chamber with background noise level below 15 dB(A). The fan is running in free air with microphone at a distance of one meter from the fan intake. 6. Air Performance : Measured by a double chamber. The value are recorded when the fan speed is stabilized at rated voltage. 7.Tolerances : ±15% on rated power and current. SPEC. NO. A170028 REVISE DATE 建準電機工業股份有限公司 ISSUE DATE 06. 22. 2001 E D I T I O N SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. P A G E 2 OF 7 0 SUNON SPECIFICATIONS MODEL : A2175-HBL TC.R 1-1. Rated Voltage : 230 VAC 50/60 HZ 1-2. Operating Voltage Range : 150-245 VAC 1-3. Starting Voltage : 150 VAC 1-4. Rated Speed : 2800/3200 RPM ± 10% 1-5. Air Delivery : 203/239 CFM 1-6. Static Pressure : 0.62/0.69 Inch-H2O 1-7. Rated Current : 0.11/0.11 AMP 1-8. Input Power : 25/26 WATTS 1-9. Noise Level : 51/58 dB(A) 1-10. Direction of Rotation : Counter-clockwise viewed front fan blade 1-11. Motor Protection : Thermal Protected. 1-12. Operating Temperature : -10 to +80 Deg.C 1-13. Storage Temperature : -30 to +80 Deg.C 1-14. Bearing System : Precise ball bearing system 1-15. Weight : 908g 1-16. Safety : UL/CUR/TUV/CE Approvals 1-17. Vibration : Vibration of acceleration 1.5G and Frequency 5~50~5Hz is applied in the 3 directions(X,Y,Z) for 30 minutes, each Direction at the cycle of 1 minute. 1-18. Life Expectancy : 50,000 Hrs at 25℃ ℃. SPEC. NO. A170028 REVISE DATE 建準電機工業股份有限公司 ISSUE DATE 06. 22. 2001 E D I T I O N SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. P A G E 3 OF 7 0 SUNON MODEL : A2175-HBL TC.R PERFORMANCE CURVES STATIC PRESSURE mm-H2O Inch-H2O 24 0.80 50 HZ 16 60 HZ 0.40 8 0 CFM 0 0 150 300 4.24 8.48 m3/min SPEC. NO. A170028 REVISE DATE 建準電機工業股份有限公司 ISSUE DATE 06. 22. 2001 E D I T I O N SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. P A G E 4 OF 7 0 SUNON MATERIAL 2. Material 2-1. Frame : DIE-CAST ALUMINUM 2-2. Impeller : Thermoplastic PBT of UL 94V-0 2-3. Lead Wire : UL1007,18AWG DIMENSIONS Air Flow Direction: Label side. ：mm UNITS： SPEC. NO. A170028 REVISE DATE 建準電機工業股份有限公司 ISSUE DATE 06. 22. 2001 E D I T I O N SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. P A G E 5 OF 7 0 SUNON Alveolate Motor Thermal Cutout With Capacitor Capacitor SPEC. NO. A170028 REVISE DATE 建準電機工業股份有限公司 ISSUE DATE 06. 22. 2001 E D I T I O N SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. P A G E 6 OF 7 0 SUNON Notes 1. SUNON will not guarantee the products if the application of our products is exceeded the limitation which is specified on this specification. 2. In case of change of the specification specified on this document, a written notice is requested in advance. 3. Please do not touch the impeller with pressure and never bring the fan with lead wire. The bearings and lead wire may be damaged. 4. No guarantee on the products against the safety problem or failure caused by powder dust, drop of water or insect. 5. If there is any data or related documentation different from this data sheet, this data sheet is the principal reference. 6. For the purpose of MIS, please indicate SPEC No. on every order. 7. In case of the fan has no polarity protection function, wires with same color (electrode) must be connected together during the assembly. (i.e. red + red, black + black) or the fan will be damaged immediately. 8. Please do not use the fan in the environment of corrosive gas or liquid or any detrimental gas. 9. Please do not store the fan in the environment of high / low temperature, high humidity or any detrimental gas. Please store the fan within 6 months, every 6 months, there shall be a leakage of electric current to the fan, even though the fan is stored in room temperature. 10.While the fan is in operation, please do not lock the fan intentionally for a long period of time, since the continuous stoppage will result in over-heat and damage of the fan. 11.During the installation of the fan, please pay substantial attention to possible noise cause by resonance vibration and vibration. 12.During the testing of the fan, please be sure to use finger guard to insure safety. 13.Unless otherwise specified, if there is any doubt in the judgement, the temperature and relative humidity range of environment will be take in according to the standard test ℃ and 65%. condition as 25℃ SPEC. NO. A170028 REVISE DATE 建準電機工業股份有限公司 ISSUE DATE 06. 22. 2001 E D I T I O N SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD. P A G E 7 OF 7 0