rev.2.0 18.11.15 CW532-030 • • • • • • Green DPSS Laser Module 532 nm, 30 mW Fix Collimated Acryl Lens Automatic Power Control 3 VDC Input Voltage IR Filter Description CW532-030 is a compact size fix collimated diode pumped solid state (DPSS) Nd:YVO4+KTP laser module with a typical emission wavelength of 532 nm, and an optical output power of typically 30 mW. It features automatic power control (APC) driving electronics, an IR filter to block residue IR radiation, and is designed for 3 VDC supply voltage. CW532-030 comes equipped with a coaxial power connector. A matching power supply and suitable heat sink is optionally available for quick setup and convenient operation (see page 3 for details). Maximum Ratings (T Parameter CASE = 25°C) Values Max. Min. Unit Operating temperature + 15 + 30 °C Storage temperature - 20 + 80 °C Electro-Optical Characteristics (T Parameter Peak Wavelength CASE = 25°C) Min. Values Typ. Max. 531 532 533 Radiated Power 30 Beam diameter at aperture 1.5 Transverse mode Unit nm mW mm TEM00 Warm up time <3 s Beam divergence 0.8 mrad Operating Current Supply Voltage 350 2.2 Material body www.roithner-laser.com VDC acryl Ø 12 x 35 (53) Dimensions MTTF 3.2 brass Material lens Connector mA 3 mm IEC 60130-10, Type A, 5.5/2.1 mm 3000 h 1 Ø4.0 Ø12.0 Outline Dimensions 35.0 18.0 ~ 300 all dimensions in mm Electrical Connection (IEC 60130-10, Type A, 5.5/2.1 mm) GND + VDC Precautions Static Electricity: Precautions against electrostatic discharge (ESD) must be taken when handling or operating the module. Surge voltage or electrostatic discharge can result in complete failure of the laser diode. Heat Sinking: In order to maintain lifetime and stability of the laser diode it is essential to provide efficient heat management. For long time stable operation proper contact between laser module and heat sink is mandatory. Safety: This laser module emits highly concentrated visible light which can be hazardous to the human eye and skin. It is classified as CLASS 3B laser product according to IEC 60825-1 and 21 CFR Part 1040.10 Safety Standards. Actual laser light emitted and precautions necessary strongly depend on mode of operation. www.roithner-laser.com 2 Accessories Laser Power Supply LPS31 • • • • • • 110-230 VAC universal input voltage Small ripple (<80 mV) AC Europlug (CEE7/16) ON/OFF switch IEC 60130-10 Type A connector Output 3 VDC, max. 1 A • • • • Aluminium, black anodized 50 x 50 x 34 mm 114 g Clamping mechanism Power Supply LPS31 Heat Sink SQ50x34 © All Rights Reserved The above specifications are for reference purpose only and subjected to change without prior notice www.roithner-laser.com 3