0603 CHIP INDUCTORS High-Reliability Chip Inductors MS312RAA Typical L vs Frequency 120 110 100 90 80 70 60 50 40 25°C This robust version of Coilcraft’s standard 0603CS series features high temperature materials that allow operation in ambient temperatures up to 155°C and a leach-resistant base metalization with tin-lead (Sn-Pb) terminations that ensures the best possible board adhesion. Current Derating Percent of rated Irms Small size, exceptional Q and high SRFs make these inductors ideal for high frequency applications where size is at a premium. They also have excellent DCR and current carrying characteristics. 30 20 200 10 0 175 -40 120 nH -20 0 20 Inductance (nH) 40 60 80 100 120 140 160 Ambient temperature (°C) 150 125 B overall 68 nH 100 75 F I G J F 25 0 A 33 nH 50 H C 12 nH 3.9 nH 10 100 1000 E terminal 10000 Frequency (MHz) Typical Q vs Frequency 120 3.9 nH 110 12 nH 100 I D Terminal wraparound: approx 0.007/0,18 both ends D ref Suggested Land Pattern A max B max C max 0.071 0.044 0.040 0.015 0.030 0.013 0.034 0.040 0.025 0.025 1,80 1,12 1,02 0,38 E 0,76 F 0,33 G 0,86 H 1,02 I 0,64 J 0,64 Note: Dimensions are before solder application. For maximum overall dimensions including solder, add 0.0025 in / 0,064 mm to B and 0.006 in / 0,15 mm to A and C. 90 Q Factor 80 70 33 nH 60 50 68 nH 120 nH 40 30 20 10 0 1 100 10 1000 10000 Frequency (MHz) Core material Ceramic Terminations Tin-lead (63/37) over silver-platinum-glass frit Ambient temperature –55°C to +125°C with Imax current, +125°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +155 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 2000 per 7″ reel Paper tape: 8 mm wide, 1.0 mm thick, 4 mm pocket spacing Document MS195-1 Revised 11/06/12 ® © Coilcraft, Inc. 2012 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. 0603 CHIP INDUCTORS MS312RAA Series (0603) SRF DCR 900 MHz 1.7 GHz min4 max5 Inductance2 Percent Q Part number1 (nH) tolerance min3 L typ Q typ L typ Q typ (MHz) (Ohms) MS312RAA1N6JSZ MS312RAA1N8JSZ MS312RAA3N3_SZ MS312RAA3N6_SZ MS312RAA3N9_SZ MS312RAA4N3_SZ MS312RAA4N7_SZ MS312RAA5N1_SZ MS312RAA5N6_SZ MS312RAA6N8_SZ MS312RAA7N5_SZ MS312RAA8N2_SZ MS312RAA8N7_SZ MS312RAA9N5_SZ MS312RAA10N_SZ MS312RAA11N_SZ MS312RAA12N_SZ MS312RAA15N_SZ MS312RAA16N_SZ MS312RAA18N_SZ MS312RAA22N_SZ MS312RAA23N_SZ MS312RAA24N_SZ MS312RAA27N_SZ MS312RAA30N_SZ MS312RAA33N_SZ MS312RAA36N_SZ MS312RAA39N_SZ MS312RAA43N_SZ MS312RAA47N_SZ MS312RAA51N_SZ MS312RAA56N_SZ MS312RAA68N_SZ MS312RAA72N_SZ MS312RAA82N_SZ MS312RAAR10_SZ MS312RAAR11_SZ MS312RAAR12_SZ MS312RAAR15_SZ MS312RAAR18_SZ 1.6 @ 250 MHz 1.8 @ 250 MHz 3.3 @ 250 MHz 3.6 @ 250 MHz 3.9 @ 250 MHz 4.3 @ 250 MHz 4.7 @ 250 MHz 5.1 @ 250 MHz 5.6 @ 250 MHz 6.8 @ 250 MHz 7.5 @ 250 MHz 8.2 @ 250 MHz 8.7 @ 250 MHz 9.5 @ 250 MHz 10 @ 250 MHz 11 @ 250 MHz 12 @ 250 MHz 15 @ 250 MHz 16 @ 250 MHz 18 @ 250 MHz 22 @ 250 MHz 23 @ 250 MHz 24 @ 250 MHz 27 @ 250 MHz 30 @ 250 MHz 33 @ 250 MHz 36 @ 250 MHz 39 @ 250 MHz 43 @ 250 MHz 47 @ 200 MHz 51 @ 200 MHz 56 @ 200 MHz 68 @ 200 MHz 72 @ 150 MHz 82 @ 150 MHz 100 @ 150 MHz 110 @ 150 MHz 120 @ 150 MHz 150 @ 150 MHz 180 @ 100 MHz 5 5 5,2 5,2 5,2 5,2 5,2 5,2 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 26 21 35 18 20 29 18 20 25 28 23 26 27 22 28 26 29 28 29 29 31 39 36 32 32 33 32 36 28 35 38 37 35 35 29 28 30 28 28 25 1.67 1.83 3.31 3.72 3.95 4.32 4.72 4.93 5.77 6.75 7.70 8.25 8.86 9.70 10.0 11.0 12.3 15.4 16.2 18.7 22.8 24.1 24.5 29.2 31.4 36.0 39.4 42.7 47.0 52.2 55.5 62.5 80.5 82.0 96.2 124 138 166 250 305 1. When ordering, specify tolerance, termination and testing codes: MS312RAAR39JSZ Tolerance: F = 1% G = 2% J = 5% Termination: S = Tin-lead (63/37) over silver-platinum-glass frit. Special order: T = Tin-silver-copper (95.5/4/0.5) over silver-platinumglass frit. P = Tin-lead (63/37) over tin over nickel over silverplatinum-glass frit. Q = Tin-silver-copper (95.5/4/0.5) over tin over nickel over silver-platinum-glass frit. Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10003 49 35 75 53 49 50 47 47 63 60 60 82 62 59 66 53 72 64 55 70 73 71 45 74 47 67 47 60 44 62 69 56 54 53 54 49 43 39 25 22 1.65 1.86 3.38 3.71 3.96 4.33 4.75 4.95 6.05 7.10 7.82 8.37 9.32 9.92 10.6 11.5 13.5 16.8 17.3 21.4 26.1 28.0 28.7 34.6 39.9 49.5 52.7 60.2 64.9 77.2 82.2 97.0 168 135 177 — — — — — 63 50 88 65 67 70 57 56 80 81 65 87 58 61 83 56 83 89 52 69 71 67 39 65 28 42 24 40 21 35 34 26 21 20 21 — — — — — 0.022 0.045 0.045 0.063 0.080 0.063 0.116 0.140 0.075 0.110 0.106 0.115 0.109 0.135 0.130 0.130 0.130 0.170 0.170 0.170 0.190 0.190 0.190 0.220 0.220 0.220 0.250 0.250 0.280 0.280 0.270 0.310 0.340 0.490 0.540 0.580 0.610 0.650 0.915 1.25 Color code 700 700 700 700 700 700 605 510 700 700 700 700 700 700 700 700 620 600 600 600 560 560 560 530 500 500 460 460 440 440 420 420 410 340 340 310 310 270 250 210 Red Black Blue Red Brown Orange Violet Green Black Red Brown Orange Yellow Blue Orange Gray Yellow Green White Blue Violet Orange Black Gray Brown White Red Black Orange Brown Blue Red Orange Yellow Green Blue Violet Gray White Black 2. Inductance measured at 250 MHz using a Coilcraft SMD-A test fixture and Coilcraft-provided correlation pieces with an Agilent/HP 4286A impedance analyzer or equivalent. 3. Q measured at the same frequency as inductance using an Agilent/ HP 4291A with an Agilent/HP 16197A test fixture or equivalents. 4. SRF measured using an Agilent/HP 8753ES network analyzer and a Coilcraft CCF1232 test fixture. 5. DCR measured on a Keithley 580 micro-ohmmeter and a Coilcraft CCF1010 test fixture. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Document MS195-1 Revised 11/06/12 ® © Coilcraft, Inc. 2012 >5000 >5000 >5000 >5000 >5000 >5000 >5000 >5000 4760 4660 4320 3880 3680 4100 3860 3640 3220 3020 3040 2680 2380 2380 2380 2380 2240 1900 1960 1740 1580 1560 1560 1480 1380 1360 1300 1140 1080 1020 900 820 Imax (mA) 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information.