M20-270-35 2” Square / 50.8mm Square Waffle Tray (BLACK) Features: • Static Protective Component Applications: • Thin Film & Chip Level / Known Good Die (KGD) • Tight Dimensional Pocket Tolerance • Passive and Active Chip Components • Durable Material Construction • Opto Electronics and Mechanical Components Waffle Tray Diagram A X Y Z X Waffle Tray - Dimensions (mm) Waffle Tray – Dimensions (Inches) Technical Spec (mm) X = 6.86mm ±0.13mm pocket size Y = 6.86mm ±0.13mm pocket size Z = 0.89mm ±0.08mm pocket depth A = 5° ±1/2° pocket draft angle No Cross Slots Array = 4 X 4 (16) Technical Spec (inches) X = 0.270” ±0.005” pocket size Y = 0.270” ±0.005” pocket size Z = 0.035” ±0.003” pocket depth A = 5° ±1/2° pocket draft angle No Cross Slots Array = 4 X 4 (16) Overall Tray Size: Size = 50.67mm ±0.25mm Height = 3.94mm +0.08mm -0.13mm Flatness = 0.30mm Overall Tray Size: Size = 1.995” ±0.010” Height = 0.155” +0.003” -0.005” Flatness = 0.012” Buy M20-270-35 Waffle Tray Pack Online Micross Kit Includes – Tray, Lid, Tyvek Paper and Clip Tray Material Surface Resistivity Static Delay Time (sec.) Temperature Limit Lid Material Clip Material Polypropylene with Carbon Powder and Glass Bead 10 1 - 105 <0.01 70˚C Polypropylene with Carbon Powder and Glass Bead Polypropylene with Carbon Powder 2 Hellesdon Park Road, Norwich, Norfolk, NR6 5DR • +44 (0)1603 788967 • www.micross.com • [email protected]