Compact Modular Fuse Holders With the Industry’s Best Ratings Products for PV, IEC and UL Applications Protection made simple ™ Compact DIN-Rail Mountable Fuse Holders Cooper Bussmann CH Series finger-safe modular fuse holders offer a set of advantages you can’t find anywhere else. Best Ratings With a wide wire range and industry leading ratings - up to 32A, 1000V, 200kA SCCR – the new CH Series provides worldwide acceptance and easy specification – including the latest PV fuse holder standard (UL 4248-18) Smallest Footprint The CH Series conserves valuable panel space. Up to 10 percent smaller than the competition. Ease of Use Easy to identify and specify, product color coding shows PV, IEC and UL holders at a glance. Optional factory-installed neutral pole and open fuse indication speeds troubleshooting. Accessories Provide Greater Flexibility Save time and money by reducing wiring and components. Advanced comb-bus bar and PLC communication accessories expand design possibilities while delivering superior performance. ™ Service In stock for QuikShip Everyday Service - 90% of our orders ship within 24 hours. QuikShip Emergency Service ensures you’re covered 24/7, 365 with “Next flight out” courier service. Modular Fuse Holder Specifications and Selection Guide Features and Benefits • High SCCR rated, UL Listed Class CC holder with indicator option for 600Vac/dc and 48Vdc. • UL Recognized midget and 10 x 38 holders with factory assembled neutral pole option. • Agency ratings up to 1000Vdc for use with solar PV fuses. • Available remote PLC indication with the CH-PLC module. • Rated for use with 75ºC or 90ºC wire, fine stranded wire, spade terminals and comb-bus bars. Use any higher temperature rated wire with appropriate derating. • Complete range of UL Listed and high SCCR rated 1-phase and 3-phase finger-safe comb-bus bars and power feed lugs. Specifications Agency Information: UL File E14853 Guide IZLT Listed, IZLT2 Recognized CSA: File 47235, CHPV and CHM - Class 6225-30, CHCC - Class 6225-01 Ratings: 600V/30A (UL) 690V/32A (IEC) Wire Range: #18 to #4 (0.8mm2 to 21.1mm2) Torque Ratings: 30 Lb-In (3.4 N•m) maximum Flammability Ratings: UL 94V0, self-extinguishing Storage & Operating Temperature Range: -20ºC to +90ºC (indicating) -20ºC to +120ºC (non-indicating) Series & Size CHM 10x38 and Midget Catalog Number With Without Indicator Indicator CHM1DIU CHM1DU CHM2DIU CHM2DU CHM3DIU CHM3DU CHM4DIU CHM4DU CHM1DNIU CHM3DNIU CHM1DNU CHM1DNXU CHPV1U CHPV2IU CHPV2U Agency Markings UR; IEC 60269-2; CSA; CCC IEC 60269-2 Number Terminal SCCR Cooper Bussmann of Poles Rating Fuses Rating 1 2 3 4 FNQ, KLM, FNM, 1 pole + 1 Solid, KTK, BAF, FWA, 200kA neutral Stranded, rms sym DCM, C10 SERIES, Fine 3 poles + AGU, BAN, FWC 1 neutral Stranded, Spade Lug, Comb 1 Bus Bar; Single and IEC 690V/32A IEC60269-2 1 neutral Dual Wire; UL; CSA; 1 75ºC and UL & IEC; 90ºC Cu UL4248-18; 1000Vdc/30A 2 wire IEC60269-1; CCC UL 48Vdc/30A; IEC 48Vdc/32A CHPV1IU CHCC1DIU CHCC CHCC2DIU Class CC CHCC3DIU UL 600V/30A; IEC 690V/32A CHM3DNU CHM1DI-48U CHPV Voltage & Current CHCC1DU UL 600V/30A CHCC2DU CHCC3DU CHCC1DI-48U UL 48Vdc/30A UR; IEC 60269-2; CSA; CCC UL; CSA; CCC 1 2 3 1 n/a n/a 33kA Solar PV series 200kA rms sym LP-CC, FNQ-R, KTK-R Modular Fuse Holder Features and Installation Guide Features Multi-Pole Ganging Hole for Wire Security Tag Use multi-pole connection kit part number JV-L to gang multiple poles together. One JV-L kit is sufficient to gang up to 4 poles. Optional Open Fuse Indicator Label Slot Self-Extinguishing, UL 94V0 Rated Polyester Material 4mm Lockout Feature in Fuse Carrier Captive, Fully Backed Out Phil-Slot Screw Spade lug connection 6mm Wire Clamp Lug and open bus bar connection (#4 to #18) Toolless Ganging of Multiple Poles Toolless DIN Rail Mounting Wire Strip Length Indicator 70 [ 2.756 ] Dimensional Data - mm (in) 52.5 [ 2.067 ] 35 [ 1.378 ] 61.83 [ 2.434 ] 17.5 [ 0.689 ] 73.88 [ 2.909 ] 18.59 [ 0.732 ] 42.58 [ 1.676 ] 52.83 [ 2.080 ] 83.19 [ 3.275 ] 1. Press down on top of DIN-Rail 9 [ 0.354 ] Removing Instructions 7.5 [ 0.295 ] 2. Rotate out on the bottom Product Design and Label Specifications CHPV & CHPVI (PV Applications) CHM & CHMI Series: CHM Series: CHPV USE PHOTOVOLTAIC 10X38 FUSE 75ºC OR 90ºC CU WIRE DO NOT OPEN UNDER LOAD Conductor No. of Type Conductors Wire Range 18-14 AWG (0.8-2.0mm2) 18-16 AWG (0.8-1.3mm2) 14-10 AWG (2.0-5.2mm2) 12-10 AWG (3.3-5.2mm2) Stranded, 8-4 AWG Fine (8.3-21.1mm2) Stranded 18-14 AWG Spade (0.8-2.0mm2) Terminal N/A Conductor No. of Type Conductors Wire Range Torque Dual USE MIDGET / 10X38 FUSE 75ºC OR 90ºC CU WIRE DO NOT OPEN UNDER LOAD 10X38 30A 5 18-14 AWG (0.8-2.0mm2) 18-16 AWG (0.8-1.3mm2) 14-10 AWG (2.0-5.2mm2) 12-10 AWG (3.3-5.2mm2) 20 in-lbs 2.3 Nm 25 in-lbs 2.8 Nm Single Solid, Stranded PV 1000V Comb Bus Solid, Stranded Dual 18-14 AWG (0.8-2.0mm2) Stranded, Fine Stranded Spade Terminal N/A Comb Bus 8-4 AWG (8.3-21.1mm2) 30 in-lbs 3.4 Nm Single Torque Midget 690V 20 in-lbs 2.3 Nm 25 in-lbs 2.8 Nm Single 10X38 32A 4 30 in-lbs 3.4 Nm Single Rated: 600V, 30A 50/60Hz 200kA RMS SYM 3W Indication Min Voltage: 90V IEC: 60269-2 32A 690Vac 120kA 3W Degree of Protection IP20 UL4248-18 Rated: 1000Vdc, 30A 33kA RMS SYM Indication Min Voltage: 90V IEC: 60269-1 32A 1000Vdc 33kA 3.5W Degree of Protection IP20 R R 4GY1 GB13539 GB13539 MADE IN CHINA MADE IN CHINA 4 5 CHCC & CHCCI (UL Applications) CHCCI-48 Series: CHCC Series: CHCC USE CLASS CC FUSE 75ºC OR 90ºC CU WIRE DO NOT OPEN UNDER LOAD Conductor No. of Type Conductors Wire Range 18-14 AWG (0.8-2.0mm2) 18-16 AWG (0.8-1.3mm2) 14-10 AWG (2.0-5.2mm2) 12-10 AWG (3.3-5.2mm2) Stranded, 8-4 AWG Fine (8.3-21.1mm2) Stranded 18-14 AWG Spade (0.8-2.0mm2) Terminal N/A Dual USE CLASS CC FUSE 75ºC OR 90ºC CU WIRE DO NOT OPEN UNDER LOAD Class CC 48Vdc 30A Torque Conductor No. of Type Conductors Wire Range 20 in-lbs 2.3 Nm 25 in-lbs 2.8 Nm Single Solid, Stranded Class CC 600V 0 18-14 AWG (0.8-2.0mm2) 18-16 AWG (0.8-1.3mm2) 14-10 AWG (2.0-5.2mm2) 12-10 AWG (3.3-5.2mm2) 30 in-lbs 3.4 Nm Solid, Stranded Dual Stranded, 8-4 AWG Fine (8.3-21.1mm2) Stranded 18-14 AWG Spade (0.8-2.0mm2) Terminal Single N/A Comb Bus Rated: 600V, 30A 50/60Hz 200kA RMS SYM Indication Min Voltage: 90V Degree of Protection IP20 0 20 in-lbs 2.3 Nm 25 in-lbs 2.8 Nm Single 30A Torque 30 in-lbs 3.4 Nm Single Comb Bus Rated: 48Vdc, 30A 200kA RMS SYM Indication Min Voltage: 15V Degree of Protection IP20 GB13539 GB13539 430P 430P MADE IN CHINA MADE IN CHINA 1 0 CHMI-48 CHMDNX (IEC Applications) N Series: CHM Series: CHM 75ºC OR 90ºC CU WIRE DO NOT OPEN UNDER LOAD Wire Range 18-12 AWG (0.8-4.0mm2) 10 AWG (5.0mm2) 18-16 AWG (0.8-1.3mm2) 14-10 AWG (0.8-5.0mm2) Conductor No. of Type Conductors Single Solid, Stranded Torque 25 in-lbs 2.8 Nm Single 10X38 USE MIDGET / 10X38 FUSE 75ºC OR 90ºC CU WIRE DO NOT OPEN UNDER LOAD Wire Range 3 20 in-lbs 2.3 Nm Dual Stranded, 8-4 AWG Fine (8.4-21.1mm2) Stranded 18-14 AWG Spade (0.8-2.0mm2) Terminal N/A SOLID LINK 30 in-lbs 3.4 Nm 18-14 AWG (0.8-2.0mm2) 18-16 AWG (0.8-1.3mm2) 14-10 AWG (2.0-5.2mm2) 12-10 AWG (3.3-5.2mm2) Comb Bus Single Solid, Stranded 18-14 AWG (0.8-2.0mm2) Stranded, Fine Stranded Spade Terminal N/A Comb Bus 8-4 AWG (8.3-21.1mm2) IEC: 60269-2 Degree of Protection IP20 SOLID LINK 690V-32A Conductor No. of Type Conductors Dual Midget 48V 20 in-lbs 2.3 Nm 25 in-lbs 2.8 Nm 30 in-lbs 3.4 Nm Single Rated: 48Vdc, 30A 200kA RMS SYM 3W Indication Min Voltage: 15V IEC: 60269-2 32A 48Vdc 120kA 3W Degree of Protection IP20 R GB13539 N MADE IN CHINA 3 10X38 32A Torque MADE IN CHINA 2 2 Remote Fuse Monitoring Accessory CH-PLC Make it Simple with Cooper Bussmann resettable three-phase remote fuse monitor that integrates with a Programmable Logic Controller (PLC) or other monitoring and control equipment. Specifications: • Power Input: 24Vdc / 5mA • Sensing Voltage: 600V/30mA • Output Signals: Digital 0Vdc (Low), 24Vdc (High) - 0Vdc Low – Fuse is good - 24Vdc High – Fuse has opened When the fuse opens, the output signal is sent high and will remain high until the unit is reset • Rated Impulse Voltage: 8kV • Local Indication: Two distinct LEDs indicate unit power (green) and open fuse (red). Upon the replacement of the fuse, the actuation of the reset switch will reset the open fuse LED • Flammability Rating: UL 94V0 Wiring: • For power, signal and ground connections use 22-24AWG (0.25mm2) 300V rated wire Emissions and Immunity Testing: • Electrostatic Discharge IEC 61000-4-2 • Electrical Fast Transient/Burst IEC 6100-4-4 • Surge Immunity IEC61000-4-5 Packaging: • The CH-PLC is packaged individually • A single unit monitors up to three phases • Package includes 0.11” (2.8mm) quick connects for power, signal and ground connections Minimum Circuit Voltage: • Minimum circuit voltage required across the CH holder is 100Vac for the remote indication device to operate Installation Technique: • Mounts on the left side of the fuse holder and mechanically interlocks with the fuse holder switch handle with hardware provided IP20 Rating: Yes Environmental Data: • Storage and Operating Temperature: -20°C to 75°C Agency Information: • UL 508 • cULus to CSA Standard 22.2 No.14 PLC Programming: • The CH-PLC signal line is designed to provide a digital input to a PLC I/O card. • Programmable Logic Control program must be written to properly interpret the input signal to the PLC. • The PLC program should check for consecutive high signals before taking action on a critical process. De-energize all circuits before installing or removing any CH-PLC devices and follow all prescribed safety procedures. Comb-Bus Bar Specifications and Selection Guide Features and Benefits • Easily distribute power in single-phase or three-phase configurations • Flexible cut-to-length solutions without compromising on the product’s finger-safe features • 100kA SCCR (Short Circuit Current Rating) when protected by a 200A Class J fuse • Single-phase bus bars rated to 1000Vdc and 100A in end-fed configuration (200A for center-fed configuration) • Three-phase bus bars rated to 600Vac/dc and 100A in end-fed configuration (200A for center-fed configuration) • Power feed terminals for single-phase and three-phase service Specifications Agency Information: UL508, File E195399 Pitch: 17.8mm SCCR: 10kA (default) 100kA (with upstream Class J 200A fuses) Max Current: 100A (power feed from end; 200A (power feed from center) Max Voltage: 600Vac/dc (three phase) 1000Vdc/600Vac (single phase) Selection Guide Part Number BB1P100M3 BB1P100M6 BB1P100M9 BB1P100M12 BB1P100M15 BB1P100M57 BB3P100M6 BB3P100M9 BB3P100M12 BB3P100M15 BB3P100M57 ECAP1P ECAPMP PWR35MM FSCVR PWR1PLP PWR50MM Description Single-phase 1000Vdc busbar, 100A, 3 pins, assembled endcap Single-phase 1000Vdc busbar, 100A, 6 pins, assembled endcap Single-phase 1000Vdc busbar, 100A, 9 pins, assembled endcap Single-phase 1000Vdc busbar, 100A, 12 pins, assembled endcap Single-phase 1000Vdc busbar, 100A, 15 pins, assembled endcap Single-phase 1000Vdc cuttable busbar, 100A, 57 pins, without endcap Three-phase 600V busbar, 100A, 6 pins, assembled endcap Three-phase 600V busbar, 100A, 9 pins, assembled endcap Three-phase 600V busbar, 100A, 12 pins, assembled endcap Three-phase 600V busbar, 100A, 15 pins, assembled endcap Three-phase 600V cuttable busbar, 100A, 57 pins, without endcap Single-phase busbar endcap Three-phase busbar endcap 35mm2 feeder terminal for three-phase busbar (115A, 1000Vac/dc) Spare contact safety protection covers Single-phase low-profile feeder terminal (115A, 1000Vac/dc) 50mm2 direct feed terminal (1000Vac/dc) Comb-bus Bar Features and Installation Guide Typical Installation Example Power Feed Terminals Comb-Bus Bar Modular Fuse Holders Typical Dimensional Data Three-phase ECAP1P PWR35MM Single-phase ECAPMP PWR50MM FSCVR PWR1PLP CH Series Modular Fuse Holder Specifications PV UL Class J 30A IEC 8x32 IEC 14x51 IEC 22x58 IEC Catalog Numbers Without Indication With* Indication CH081D CH081DNX CH081DNS CH081DN CH082D CH083D CH083DNS CH083DN CH084D CH081DI CH081DNSI CH081DNI CH082DI CH083DI CH083DNSI CH083DNI CH084DI CHM1DU CHM2DU CHM3DU CHM4DU CHM1DNU CHM3DNU CHM1DIU CHM2DIU CHM3DIU CHM4DIU CHM1DNIU CHM3DNIU – Size CH08 8x32 CHM 10X38 and Midget – CHPV1U CHPV2U CHCC1DU CHCC2DU CHCC3DU CHCC1DI-48U CHPV1IU CHPV2IU CHCC1DIU CHCC2DIU CHCC3DIU – CH141D CH141DMS CH141DNX CH141DN CH142D CH143D CH143DMS CH143DN CH143DNMS CH144D CH141DI CH141DNI CH142DI CH143DI CH143DNI CH144DI CH221D CH221DMS CH221DNX CH221DN CH222D CH223D CH223DMS CH223DN CH223DNMS CH224D Not Available with local neon indication (remote microswitch only) CHPV CHCC Class CC IEC CH22 22x58 Phase Configuration IEC 400Vac 25A UL 600V/30A; IEC 690V/32A • • • • • • * * * * * * 1-pole 2-pole 3-pole 4-pole 1-pole + Neutral 3-pole + Neutral 1 2 3 4 2 4 • * 1-pole 1 1-pole + Neutral 2 ††† ††† ** ** ** ** 1-pole 2-pole 1-pole 2-pole 3-pole 1-pole 1 2 1 2 3 1 UL & IEC; 1000Vdc/30A • • • UL 600V/30A UL 48Vdc/30A CH14 14x51 UL No. of 17.5mm Modules Wire Range • • • • • • • • • UL 48Vdc/30A; IEC 48Vdc/32A IEC 690V32A CHM1DI-48U CHM1DNXU Max Voltage & Current UL 600Vac/dc 40A (5 Watt) IEC 690Vac, 50A UL 600Vac/dc, 100A (9.5 Watt) IEC 690Vac, 125A • • • • • • • • • • • • • • • • • • • • † † † † † † 1-pole 1 Neutral Pole 1-pole + Neutral 1-pole + Neutral 2-pole 3-pole 3-pole + Neutral 3-pole + Neutral 4-pole 1 1 1 2 2 3 3 4 4 1-pole 1-pole + Microswitch 1 Neutral Pole 1-pole + Neutral 2-pole 3-pole 3-pole + Microswitch 3-pole + Neutral 3-pole + Neutral + Microswitch 4-pole 1.5 1.5 1.5 3 3 4.5 4.5 6 6 6 1-pole 1-pole + Microswitch 1 Neutral Pole 1-pole + Neutral 2-pole 3-pole 3-pole + Microswitch 3-pole + Neutral 3-pole + Neutral + Microswitch 4-pole 2 2 2 4 4 6 6 8 8 8 1-16mm2 (18-8 AWG) 2 Maximum Torque 2.5 N•m (22LB-In) 1-10mm (18-8 AWG) 2.0 N•m (17.5LB-In) 1-16mm2 (18-8 AWG) 2.5 N•m (22LB-In) 1-21mm2 (18-4 AWG) 3.4 N•m (30LB-In) 1-21mm2 (18-4 AWG) 3.4 N•m (30LB-In) 2.5-16mm2 (14-6 AWG) 3.0 N•m (26LB-In) 2.5-50mm2 (14-1 AWG) 4.0 N•m (35LB-In) Class J easyID™ Indication Neon Indication CH30J1 CH30J2 CH30J3 CH30J1I CH30J2I CH30J3I CH30J 30A Class J UL/CSA 600Vac †† †† †† 1-pole 2-pole 3-pole — — — 1-50mm2 (18-1 AWG) 1-8 AWG 4.0 N•m (35LB-In) 10-18 AWG 2.7N•m (24LB-IN) CH60J1 CH60J2 CH60J3 CH60J1I CH60J2I CH60J3I CH60J 60A Class J UL/CSA 600Vac †† †† †† 1-pole 2-pole 3-pole — — — 1-50mm2 (18-1 AWG) 1-8 AWG 4.0 N•m (35LB-In) 10-18 AWG 2.7N•m (24LB-In) † UL Recognized (cURus) †† UL LIsted (cULus) ††† UL Recognized, Standard 4248-18, CSA For further details see Data Sheets 2053 (CH08, CHM, CHCC, CH14 AND CH22) and 2144 (CHJ Class J) *90V miminum required for illumination ***12V mininum required for illumination * UL Recognized, CSA ** UL Listed, CSA Widest Range of Fuse Holders Available Modular Fuse Holders Series Covers SAMI™ Series CUBEFuse™ Series Open Block Series IEC Series Bolt-Down Series CH Series In-line Series JTN 600 Series Panel Mount Series Optima® Series Knife Blade Series Class CC and Midget Series Military Series Customer Assistance Application Engineering Technical assistance is available to all customers. Staffed by degreed electrical engineers, this application support is available Monday-Friday, 8:00 a.m. – 5:00 p.m. Central Time. Contact: Customer Satisfaction Team Available to answer questions regarding Cooper Bussmann products & services Monday-Friday, 8:00 a.m. – 6:00 p.m. Central Time. Contact: • Toll-free phone: 855-287-7626 (855-BUSSMANN) • Toll-free fax: 800-544-2570 • E-mail: [email protected] • • • • Emergency and After-Hours Orders Next flight out or will call shipment for time-critical needs. Customers pay only standard product price, rush freight charges, & modest emergency service fee. Place these orders through the Customer Satisfaction Team during regular business hours. For after-hours, contact: Toll-free phone: 855-287-7626 (855-BUSSMANN) Fax: 636-527-1607 E-mail: [email protected] Live Chat: www.cooperbussmann.com Online Resources Visit www.cooperbussmann.com for the following resources: • Product search & cross-reference • Product & technical materials • Solutions centers for information on topical issues including arc-flash, selective coordination & short-circuit current rating • Technical tools, like our arc-flash calculator • Where to purchase Cooper Bussmann product • After hours 314-995-1342 C3 – the Enhanced, Online Cooper Customer Center Provides real time product availability, net pricing, order status & shipment tracking across six Cooper divisions: B-Line, Bussmann, Crouse-Hinds, Lighting, Power Systems & Wiring Devices. Call 877-995-5955 for log-in assistance. Available at: Services Cooper Bussmann Services team provides engineering expertise in electrical system reviews, electrical safety training & component testing for Agency compliance. Contact: • www.cooperc3.com • Phone: 636-207-3294 • E-mail: [email protected] Cooper Bussmann® St. Louis, MO 63178 636-394-2877 w w w. c o o p e r b u s s m a n n . c o m Your Authorized Cooper Bussmann Distributor is: Cooper Industries plc 600 Tra vis, Ste. 5600 Houston, TX 77002-1001 P: 713-209-8400 www.cooperindustries.com Reorder # 3185 1111-2.5M Printed in USA