MDA100G RECTRON THRU SEMICONDUCTOR TECHNICAL SPECIFICATION MDA110G SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES * * * * * Low cost Low leakage Low forward voltage Mounting position: Any Weight: 1.26 grams RS-1 MECHANICAL DATA * UL listed the recognized component directory, file #E94233 * Epoxy: Device has UL flammability classification 94V-O .414 (10.5) .374 (9.5) .360 (9.1) .320 (8.1) AC .390 MIN. (9.9) .035 (0.9) DIA .028 (0.7) TYP. .160 (4.1) SPACING .140 (3.6) .650 (16.5) .610 (15.5) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .161 (4.1) .150 (3.8) Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. .050 (1.27) For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) SYMBOL RATINGS MDA100G MDA101G MDA102G MDA104G MDA106G MDA108G MDA110G UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 Maximum RMS Bridge Input Voltage VRMS VDC Maximum DC Blocking Voltage Maximum Average Forward Output Current at T A = 75oC Peak Forward Surge Current 8.3 ms single half sine-wave 1000 Volts 560 700 Volts 800 1000 100 200 400 600 800 35 70 140 280 420 50 100 200 400 600 Volts IO 1.0 Amps I FSM 30 Amps TJ -55 to + 125 0 C T STG -55 to + 150 0 C superimposed on rated load (JEDEC method) Operating Temperature Range Storage Temperature Range ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Forward Voltage Drop per Bridge VF Element at 1.57A DC Maximum Reverse Current at Rated @T A = 25 oC DC Blocking Voltage per element @T A = 100 o C MDA100G MDA101G MDA102G MDA104G MDA106G MDA108G MDA110G UNITS 1.3 Volts 10 uAmps 1 mAmps IR 2001-5 FIG. 3 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG. 2 - TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, (A) PEAK FORWARD SURGE CURRENT, (A) RATING AND CHARACTERISTIC CURVES ( MDA100G THRU MDA110G ) 30 8.3ms Single Half Sine-Wave (JEDED Method) 20 10 0 1 2 4 6 8 10 20 40 60 NUMBER OF CYCLES AT 60Hz 1.0 .8 .6 .4 Single Phase Half Wave 60Hz Inductive or Resistive Load .2 0 100 0 20 140 ) FIG. 4 - TYPICAL REVERSE CHARACTERISTICS FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 20 10 INSTANTANEOUS REVERSE CURRENT, (uA) INSTANTANEOUS FORWARD CURRENT, (A) 40 60 80 100 120 AMBIENT TEMPERATURE, ( 1.0 TJ = 25 Pulse Width = 300us 1% Duty Cycle .1 .01 1.0 TJ = 25 0.1 .01 .8 .9 1.0 1.1 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, (V) 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) RECTRON 140