Vishay AC-AT Cemented leaded wirewound resistor Datasheet

AC, AC-AT
www.vishay.com
Vishay Draloric
Cemented Leaded Wirewound Resistors
FEATURES
• AEC-Q200 qualified AC-AT series
• High power dissipation in small design
• Non-flammable
UL 94 V-0
coating
conforming
to
• Excellent pulse load capability
• Non-inductive (NI) version available
• WSZ-form lead bending available for SMD mounting
The AC series is the perfect choice for general purpose
power applications. The AEC-Q200 qualified AC-AT series
is best suited for automotive applications. The robust silicon
cement coating can handle challenging ambient and
operating conditions. Typical applications include but are
not limited to energy meters, power supplies and
automotive electronics. For a given application,
requirements of ohmic value, rated power, peak voltage,
pulse shape, pulse duration, lead bending, and
environmental conditions may be submitted to recommend
the most suitable product.
Various lead forms are available such as RT (radial taped),
WSZ (Z-form), DK (double kink), EK (single kink) with defined
mounting pitch.
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Automotive electronics
• Industrial electronics
• Power supplies
• White goods
• Pre-charged applications
STANDARD ELECTRICAL SPECIFICATIONS
TYPE
RATED
RATED
DISSIPATION DISSIPATION
P40
P70
LIMITING
VOLTAGE
Umax.
RESISTANCE
RANGE (1)
TCR =
-10 ppm/K to
-80 ppm/K
RESISTANCE
RANGE (1)
TCR =
+100 ppm/K to
+180 ppm/K
RESISTANCE
RANGE (1)
TCR =
± 100 ppm/K
-
RESISTANCE
TOLERANCE
AC01, AC01-AT (3)
1W
0.9 W
P x R
0.10  to 33 
36  to 2.4 k
AC03, AC03-AT (2)
3W
2.5 W
P x R
0.10  to 390 
430  to 3.3 k 3.6 k to 5.1 k
±5%
AC04, AC04-AT (3)
4W
3.5 W
P x R
0.10  to 620 
680  to 6.8 k
-
±5%
AC05, AC05-AT (3)
5W
4.7 W
P x R
0.10  to 910 
1.0 k to 10 k
-
±5%
AC07, AC07-AT
7W
5.8 W
P x R
0.10  to 1.5 k 1.6 k to 15 k
-
±5%
AC10, AC10-AT
10 W
8.4 W
P x R
0.22  to 560 
-
±5%
620  to 27 k
±5%
Notes
• The operating temperature range for these resistors is from -55 °C up to 250 °C
(1) Resistance value to be selected for ± 5 % from E24
(2) AC03 WSZ: P
40 °C = 1.8 W; P70 °C = 1.5 W
(3) AEC-Q200 qualification is in progress
Revision: 14-Mar-17
Document Number: 28730
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
AC, AC-AT
www.vishay.com
Vishay Draloric
PART NUMBER AND PRODUCT DESCRIPTION
Part Number: AC03000001509JAC00
AC03AT0001509JAC00
A
C
0
3
0
0
0
0
0
1
5
0
9
J
A
C
0
0
A
C
0
3
A
T
0
0
0
1
5
0
9
J
A
C
0
0
TCR /
MATERIAL
MODEL
VARIANT
AC01000 = AC01
AC03000 = AC03
AC04000 = AC04
AC05000 = AC05
AC07000 = AC07
AC10000 = AC10
0 = neutral
1 = RT
2 = SWI
3 = DK SP 20 mm
4 = DK LP 33 mm
5 = DK LP 17.8 mm
6 = NI Non inductive
7 = DK LP 25.4 mm
9 = WSZ 6720
8 = DK SP 25.4 mm
Z = Value overflow
A = EK 22.5 mm
B = EK 17.8 mm
C = EK 25.4 mm
D = Cu wire 0.8 mm
E = EK 33 mm
F = EK 50.8 mm
G = DK SP 33 mm
H = EK 20 mm
AC01AT0 = AC01-AT
AC03AT0 = AC03-AT
AC04AT0 = AC04-AT
AC05AT0 = AC05-AT
AC07AT0 = AC07-AT
AC10AT0 = AC10-AT
0 = standard
TOLERANCE PACKAGING
CODE
CODE
VALUE
3 digit value
1 digit
multiplier
MULTIPLIER
7 = *10-3
8 = *10-2
9 = *10-1
0 = *100
1 = *101
2 = *102
J = ± 5.0 %
(see
Packaging
table)
SPECIAL
00 = standard
2 digit code =
customized version (1)

Product Description: AC03 15R 5 % AC
AC03AT 15R 5 % AC
AC03
15R
5%
AC
AC03-AT
15R
5%
AC
TYPE
RESISTANCE
TOLERANCE
PACKAGING
R10 = 0.1 
75R = 75 
27K = 27 k
5%
AC01
AC03
AC04
AC05
AC07
AC10
AC01-AT
AC03-AT
AC04-AT
AC05-AT
AC07-AT
AC10-AT
AC
A1
AB
AE
LB
LC
LK
BM
Note
(1) For special windings or the non-inductive versions, please contact: [email protected]
Revision: 14-Mar-17
Document Number: 28730
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
AC, AC-AT
www.vishay.com
Vishay Draloric
PACKAGING
TYPE / SIZE
CODE DESCRIPTION QUANTITY
PACKAGING STYLE
WIDTH
PITCH
DIMENSIONS
AC01
AC01-AT
A1
A1
1000
Taped acc. to IEC 60286-1
fan-folded in a box
63 mm
10 mm
260 mm x 85 mm x 70 mm
AC01 DK/EK
AC01-AT DK/EK
LC
LC
500
Bulk packaging
-
-
260 mm x 80 mm x 55 mm
AC01 RT
AC01-AT RT
AE
RE
2500
Taped acc. to IEC 60286-2
fan-folded in a box
-
12.7 mm
200 mm x 46 mm x 334 mm
AC03
AC03-AT
AC
AC
500
Taped acc. to IEC 60286-1
fan-folded in a box
63 mm
10 mm
260 mm x 85 mm x 58 mm
AC03 DK/EK
AC03-AT DK/EK
LC
LC
500
Bulk packaging
-
-
224 mm x 82 mm x 54 mm
AC03 RT
AC03-AT RT
AQ
AQ
1800
Taped acc. to IEC 60286-2
fan-folded in a box
-
12.7 mm
200 mm x 46 mm x 334 mm
AC03 WSZ
AC03-AT WSZ
BM
BM
1250
Blister taped acc. to
IEC 60286-3 in a box
-
8 mm
350 mm x 350 mm x 55 mm
AC04 (1)
AC04-AT (1)
AC
AC
500
Taped acc. to IEC 60286-1
fan-folded in a box
63 mm
10 mm
260 mm x 85 mm x 70 mm
260 mm x 85 mm x 58 mm
AC04 DK/EK
AC04-AT DK/EK
LC
LC
500
Bulk packaging
-
25.4 mm
224 mm x 82 mm x 54 mm
AC05
AC05-AT
AC
AC
500
Taped acc. to IEC 60286-1
fan-folded in a box
63 mm
5 mm
270 mm x 86 mm x 118 mm
AC05 DK/EK
AC05-AT DK/EK
LC
LC
500
Bulk packaging
-
-
224 mm x 82 mm x 54 mm
AC07
AC07-AT
AC
AC
500
Taped acc. to IEC 60286-1
fan-folded in a box
73 mm
10 mm
26 mm x 90 mm x 118 mm
AC07 DK/EK
AC07-AT DK/EK
LB
LB
250
Bulk packaging
-
-
224 mm x 82 mm x 54 mm
AC10
AC10-AT
AB
AB
250
Taped acc. to IEC 60286-1
fan-folded in a box
88 mm
10 mm
265 mm x 105 mm x 105 mm
Note
(1) Manufacturing at different production locations may involve use of differently sized box
Revision: 14-Mar-17
Document Number: 28730
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
AC, AC-AT
www.vishay.com
Vishay Draloric
DESCRIPTION
ASSEMBLY
Wirewound resistors are best suited for use in high power,
high current applications. The silicon cement lacquer
coating enables AC series to withstand challenging
operating and environmental conditions. The coating is
resistant to cleaning solvents specified in IEC 60115-1 (1).
Production is strictly controlled and follows an extensive set
of instructions established for reproducibility.
The resistors are axial leaded for soldering. The terminals of
the resistors are completely lead (Pb)-free, the special tin
plating provides compatibility with lead (Pb)-free and
lead-containing soldering processes.
The winding is done with a specific material on a specially
developed fine ceramic body (Al2O3). The ceramic meets the
highest requirements against mechanical resistance,
thermal shocks, dielectric strength, and insulation
resistance at high temperatures. With different diameters
and turn spacings of resistive wire, a large ohmic value
range can be covered.
The resistors are marked with resistance, rated dissipation
(P40) and tolerance. Product quality is verified by testing
procedures, performed on all individual resistors.
Resistance is measured on the lead wires at a distance of
6 mm from the resistor body. If a greater length of lead wire
is used in the application, the user may need to consider the
additional wire resistance, particularly with low resistance
products.
MATERIALS
Vishay acknowledges the following systems for the
regulation of hazardous substances:
• IEC 62474, Material Declaration for Products of and for the
Electrotechnical Industry, with the list of declarable
substances given therein (2)
• The Global Automotive Declarable Substance List
(GADSL) (3)
• The REACH regulation (1907/2006/EC) and the related list
of substances with very high concern (SVHC) (4) for its
supply chain
The products do not contain any of the banned substances
as per IEC 62474, GADSL, or the SVHC list, see
www.vishay.com/how/leadfree. Hence the products fully
comply with the following directives:
• 2000/53/EC End-of-Life Vehicle Directive (ELV) and
Annex II (ELV II)
• 2011/65/EU Restriction of the Use of Hazardous
Substances
Directive
(RoHS)
with
amendment
2015/863/EU
• 2012/19/EU Waste Electrical and Electronic Equipment
Directive (WEEE)
Vishay pursues the elimination of conflict minerals from
its supply chain, see the Conflict Minerals Policy at
www.vishay.com/doc?49037.
Special lead forms may be available on request, please
inquire at [email protected]. These components
are high dissipation power resistors, customers are advised
to use a high melting point solder.
APPLICATION INFORMATION
The power dissipation of the resistor generates a
temperature rise with respect to the ambient. The
permissible dissipation is derated for temperatures above
40 °C, as shown in the derating diagram, in order to avoid
overheating of the resistor. The heat dissipated from the
resistor may affect adjacent components, hence proper
clearance will be required in order to avoid overheating. The
resistive wire is encapsulated by a protective lacquer
coating.
All materials used are non-flammable and inorganic.
These resistors do not feature a limited lifetime when
operated within the permissible limits. However, resistance
value drift increasing over operating time may result in
exceeding a limit acceptable to the specific application,
thereby establishing a functional lifetime.
APPROVALS
The AC-AT series is AEC-Q200 qualified, specifically for use
in automotive applications.
RELATED PRODUCTS
UL approved, special cement coated fusible resistor is also
available. For details please see the datasheet:
“AC01-CS, AC03-CS, AC05-CS - Axial Cemented Fusible
Wirewound Safety Resistors” www.vishay.com/doc?28909
For high surge wirewound products, silicon cement coated
Z300-Cxx series is available, see the datasheet:
“Z300-Cxx - High Surge Axial Cemented Wirewound
Resistors” www.vishay.com/doc?21027
For precision applications, cement coated PAC series is
available, see the datasheet:
“PAC Series - Cemented Wirewound Precision Resistors”
www.vishay.com/doc?28731



Notes
(1) Other cleaning solvents with aggressive chemicals should be evaluated in actual cleaning process for their suitability
(2) The IEC 62474 list of declarable substances is maintained in a dedicated database, which is available at http://std.iec.ch/iec62474
(3) The Global Automotive Declarable Substance List (GADSL) is maintained by the American Chemistry Council and available at www.gadsl.org
(4) The SVHC list is maintained by the European Chemical Agency (ECHA) and available at http://echa.europa.eu/candidate-list-table
Revision: 14-Mar-17
Document Number: 28730
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
AC, AC-AT
www.vishay.com
Vishay Draloric
PULSE DIAGRAMS
(ti = pulse duration; tp = repetition time)
1000
10 000
tp/ti = 1000
1R0
R10
10R
100R
2K0
tp/ti = 200
100
10
Pˆ max. (W)
ˆ
P
max. (W)
10 000
tp/ti = 50
tp/ti = 1000
1000
R10
1R0
10R
110R
4K7
tp/ti = 200
tp/ti = 50
100
tp/ti = 10
tp/ti = 10
10
tp/ti = 2
tp/ti = 2
1
10-6
10-5
10-4
10-3
10-2
10-1
1
10-6
1
10-5
10-4
10-3
10-2
ti (s)
AC03 and AC03-AT Pulse on a regular basis; max. permissible
peak pulse power ( P̂ max.) as a function of pulse duration (ti)
10 000
tp/ti = 1000
ˆ
P
max. (W)
Pˆ max. (W)
1000
R10
1R0
10R
100R
6K8
tp/ti = 200
tp/ti = 50
1000
100
tp/ti = 10
1
10-6
tp/ti = 2
10-5
10
10-4
10-3
10-2
10-1
tp/ti = 1000
tp/ti = 200
1R1
R10
11R
100R
8K2
tp/ti = 50
100
10
1
10-6
1
tp/ti = 10
tp/ti = 2
10-5
10-4
10-3
10-2
10-1
ti (s)
10
AC05 and AC05-AT Pulse on a regular basis; max. permissible
peak pulse power ( P̂ max.) as a function of pulse duration (ti)
10 000
tp/ti = 1000
tp/ti = 200
Pˆ max. (W)
Pˆ max. (W)
10 000
1R1
R10
11R
100R
15K
1000
tp/ti = 50
tp/ti = 1000
1000
100
tp/ti = 10
R68
2R2
33R
240R
15K
tp/ti = 200
tp/ti = 50
tp/ti = 10
tp/ti = 2
tp/ti = 2
10
1
10-6
1
ti (s)
AC04 and AC04-AT Pulse on a regular basis; max. permissible
peak pulse power ( P̂ max.) as a function of pulse duration (ti)
100
1
ti (s)
AC01 and AC01-AT Pulse on a regular basis; max. permissible
peak pulse power ( P̂ max.) as a function of pulse duration (ti)
10 000
10-1
10
10-5
10-4
10-3
10-2
10-1
1
10
ti (s)
AC07 and AC07-AT Pulse on a regular basis; max. permissible
peak pulse power ( P̂ max.) as a function of pulse duration (ti)
Revision: 14-Mar-17
1
10-6
10-5
10-4
10-3
10-2
10-1
1
10
ti (s)
AC10 and AC10-AT Pulse on a regular basis; max. permissible
peak pulse power ( P̂ max.) as a function of pulse duration (ti)
Document Number: 28730
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
AC, AC-AT
www.vishay.com
Vishay Draloric
PULSE DIAGRAMS
Pulse energy in joules or wattseconds is calculated with the help of the R-value to be used in the application. Choose the R
value on X axis and look for the corresponding E (Ws/) value on Y axis. Multiplying both the R () to corresponding E (Ws/),
will be resultant total pulse Energy (Ws or J) for adiabatic conditions.
1000
Pulse Energy (Ws/Ω)
Pulse Energy (Ws/Ω)
100
10
1
0.1
0.01
100
10
1
0.1
0.01
0.001
0.001
0.0001
0.0001
0.00001
0.1
1
10
100
1000
0.1
10 000
1
10
100
1000
R (Ω)
AC01 and AC01-AT Pulse capability; E (Ws) as a function of R ()
AC03 and AC03-AT Pulse capability; E (Ws) as a function of R ()
1000
Pulse Energy (Ws/Ω)
Pulse Energy (Ws/Ω)
1000
100
10
1
0.1
100
10
1
0.1
0.01
0.01
0.001
0.001
0.0001
0.0001
0.1
1
10
100
1000
10 000
0.1
1
10
100
R (Ω)
AC04 and AC04-AT Pulse capability; E (Ws) as a function of R ()
1000
10 000
R (Ω)
AC05 and AC05-AT Pulse capability; E (Ws) as a function of R ()
1000
Pulse Energy (Ws/Ω)
1000
Pulse Energy (Ws/Ω)
10 000
R (Ω)
100
10
1
0.1
100
10
1
0.1
0.01
0.01
0.001
0.001
0.0001
0.0001
0.1
1
10
100
1000
10 000
R (Ω)
AC07 and AC07-AT Pulse capability; E (Ws) as a function of R ()
Revision: 14-Mar-17
0.1
1
10
100
1000
10 000
100 000
R (Ω)
AC10 and AC10-AT Pulse capability; E (Ws) as a function of R ()
Document Number: 28730
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
AC, AC-AT
www.vishay.com
Vishay Draloric
1500
Vˆ max. (V)
Vˆ max. (V)
2000
1500
1000
1000
500
500
0
10-6
10-5
10-4
10-3
10-2
10-1
0
10-6
1
10-5
10-4
10-3
10-2
10-1
AC01 and AC01-AT Pulse on a regular basis; max. permissible
peak pulse voltage ( Vˆ max.) as a function of pulse duration (ti)
AC03 and AC03-AT Pulse on a regular basis; max. permissible
peak pulse voltage ( Vˆ max.) as a function of pulse duration (ti)
2500
Vˆ max. (V)
Vˆ max. (V)
2500
2000
2000
1500
1500
1000
1000
500
500
0
10-6
10-5
10-4
10-3
10-2
10-1
0
10-6
1
10-5
10-4
10-3
10-2
10-1
ti (s)
AC05 and AC05-AT Pulse on a regular basis; max. permissible
peak pulse voltage ( Vˆ max.) as a function of pulse duration (ti)
5000
Vˆ max. (V)
5000
Vˆ max. (V)
1
ti (s)
AC04 and AC04-AT Pulse on a regular basis; max. permissible
peak pulse voltage ( Vˆ max.) as a function of pulse duration (ti)
4000
4000
3000
3000
2000
2000
1000
1000
0
10-6
1
ti (s)
ti (s)
10-5
10-4
10-3
10-2
10-1
1
ti (s)
AC07 and AC07-AT Pulse on a regular basis; max. permissible
peak pulse voltage ( Vˆ max.) as a function of pulse duration (ti)
Revision: 14-Mar-17
0
10-6
10-5
10-4
10-3
10-2
10-1
1
ti (s)
AC10 and AC10-AT Pulse on a regular basis; max. permissible
peak pulse voltage ( Vˆ max.) as a function of pulse duration (ti)
Document Number: 28730
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
AC, AC-AT
www.vishay.com
Vishay Draloric
Rated Power in %
FUNCTIONAL PERFORMANCE
120
100
80
60
40
20
0
-40
0
50
40
100
Derating
Temperature Rise in K
150
200
250
300
350
Ambient Temperature in °C
350
AC10,
AC10-AT
300
250
AC07,
AC07-AT
200
AC05,
AC05-AT
150
AC04,
AC04-AT
100
AC03,
AC03-AT
50
AC01,
AC01-AT
0
0
5
Temperature Rise
Revision: 14-Mar-17
10
15
Power in W
Document Number: 28730
8
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
AC, AC-AT
www.vishay.com
Vishay Draloric
TESTS PROCEDURES AND REQUIREMENTS
All tests are carried out in accordance with the following
specifications:
Unless otherwise specified the following values apply:
• IEC 60115-1, generic specification (includes tests)
• Relative humidity: 45 % to 75 %
The test and requirements table contains only the most
important tests. For the full test schedule refer to the
documents above.
• Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar)
The tests are carried out in accordance with IEC 60068-2-xx
test method and under standard atmospheric conditions in
accordance with IEC 60068-1, 5.3.
Climatic category -40 / 200 / 56 (rated temperature range:
lower category temperature, upper category temperature;
damp heat, steady state, test duration: 56 days) is valid.
• Temperature: 15 °C to 35 °C
For performing some of the tests, the components are
mounted on a test board in accordance with IEC 60115-1,
4.31.
In test procedures and requirements table, only the tests
and requirements are listed with reference to the relevant
clauses of IEC 60115-1 and IEC 60068-2-xx test methods.
A short description of the test procedure is also given.
TEST PROCEDURES AND REQUIREMENTS
IEC 60068-2
TEST
METHOD
TEST
PROCEDURE
REQUIREMENTS
PERMISSIBLE CHANGE (RMAX.)
4.13
-
Short time overload
Room temperature;
10x rated power P40;
5s
± (2 % R + 0.1 )
4.16
21 (Ua1)
21 (Ub)
21 (Uc)
Robustness of
terminations
Tensile, bending and torsion
No damage
± (0.5 % R + 0.05)
4.18
20 (Tb)
Resistance to
soldering heat
Unmounted components
(260 ± 5) °C; (10 ± 1) s
± (0.5 % R + 0.05)
4.19
-
Rapid change
of temperature
30 min at -55 °C and
30 min at +200 °C;
5 cycles
± (1.5 % R + 0.05 )
IEC 60115-1
CLAUSE
4.23
4.23.2
Climatic sequence:
2 (Ba)
Dry heat
16 h; 200 °C
4.23.3
30 (Db)
Damp heat
(accelerated)
1st cycle
24 h; 55 °C;
90 % to 100 % RH
4.23.4
1 (Aa)
Cold
2 h; -55 °C
4.23.5
13 (M)
Low air pressure
2 h; 8.5 kPa;
15 °C to 35 °C
4.23.6
30 (Db)
Damp heat
remaining cyclic
5 days; 55 °C;
95 % to 100 % RH; 5 cycles
4.24
78 (Cab)
Damp heat,
(steady state)
56 days; (40 ± 2) °C;
(93 ± 5) % RH
± (5 % R + 0.1 )
4.25.2
-
Endurance
(at room temperature)
1000 h;
loaded with 116 % of P70
± (5 % R + 0.1 )
± (5 % R + 0.1 )
-
Endurance at
upper category
temperature
125 °C; without load; 1000 h
4.25.3
200 °C; 30 % of P70; 1000 h
± (5 % R + 0.1 )
4.35
-
Flammability
IEC 60695-11-5
needle flame test; 10 s
No burning after 30 s
4.37
67 C(y)
Damp heat, steady state,
accelerated
(85 ± 2) °C; RH (85 ± 3) %;
1000 h;
10 % of operation power (P70)
U  0.3 x Umax.
± (5 % R + 0.1 )
4.38
-
Electrostatic discharge test
2 discharges, 8 kV
(1 positive, 1 negative)
± (5 % R + 0.1 )
Revision: 14-Mar-17
± (1 % R + 0.05 )
Document Number: 28730
9
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
AC, AC-AT
www.vishay.com
Vishay Draloric
DIMENSION AND MASS
L
d
x
B
D
DIMENSIONS in millimeters
TYPE
xmax.
B
MASS PER UNIT
(g)
4.3
2
63 ± 1
0.52
4.8
2
63 ± 1
0.75
Lmax.
Dmax.
AC01, AC01-AT
11
AC03, AC03-AT
13
AC04, AC04-AT
16.5
5.5
AC05, AC05-AT
18
7.5
AC07, AC07-AT
26
AC10, AC10-AT
44
d
3
63 ± 1
1.10
3
63 ± 1
1.90
7.5
3
73 ± 1
2.60
8.0
3
88 ± 1
4.50
0.8 ± 0.03
LEAD TERMINATION BENDING FORMS
L
P1
P1
L
L
ØD
P
ØB
ØB
LEAD BENDING STYLE
= EK (Single Kink)
Ød
h
Ød
h
P2
ØB
LEAD BENDING STYLE = DK SP
(Double Kink Standard Pitch)
Ød
h
P2
SMAX.
LEAD BENDING STYLE = DK LP
(Double Kink Large Pitch)
DIMENSIONS - Single and double kink lead type outline
TYPE
AC01,
AC01-AT
AC03,
AC03-AT
AC04,
AC04-AT
AC05,
AC05-AT
AC07,
AC07-AT
Ø Dmax.
(mm)
4.3
4.8
5.5
7.5
7.5
Revision: 14-Mar-17
Lmax.
(mm)
11.0
13.0
16.5
18.0
26.0
KINK
TYPE
TERMINATION WIRE MATERIAL
AND WIRE DIAMETER (Ø d)
h
(mm)
P1
(mm)
P2
(mm)
SMAX.
(mm)
ØB
(mm)
MASS
(g)
MATERIAL
Ø d (mm)
EK
FeCu
0.8 ± 0.03
8±1
17.8 ± 0.5
17.8 ± 3
2
1.0 ± 0.1
0.52
DK SP
FeCu
0.8 ± 0.03
8±1
19.8 ± 0.5
17.8 ± 3
2
1.0 ± 0.1
0.52
DK LP
FeCu
0.8 ± 0.03
8±1
17.8 ± 0.5
17.8 ± 3
2
1.0 ± 0.1
0.52
EK
FeCu
0.8 ± 0.03
8±1
25.4 ± 0.5
25.4 ± 3
2
1.0 ± 0.1
0.75
DK SP
FeCu
0.8 ± 0.05
8±1
22.0 ± 0.5
20.0 ± 3
2
1.0 ± 0.1
0.75
DK LP
FeCu
0.8 ± 0.05
8±1
25.4 ± 0.5
25.4 ± 3
2
1.0 ± 0.1
0.75
1.10
EK
FeCu
0.8 ± 0.05
8±1
25.4 ± 0.5
25.4 ± 3
2
1.0 ± 0.1
DK SP
FeCu
0.8 ± 0.05
8±1
27.4 ± 0.5
25.4 ± 3
2
1.0 ± 0.1
1.10
DK LP
FeCu
0.8 ± 0.05
8±1
25.4 ± 0.5
25.4 ± 3
2
1.0 ± 0.1
1.10
1.90
EK
FeCu
0.8 ± 0.05
8±1
25.4 ± 0.5
25.4 ± 3
2
1.0 ± 0.1
DK SP
FeCu
0.8 ± 0.05
8±1
27.4 ± 0.5
25.4 ± 3
2
1.0 ± 0.1
1.90
DK LP
FeCu
0.8 ± 0.05
8±1
25.4 ± 0.5
25.4 ± 3
2
1.0 ± 0.1
1.90
EK
FeCu
0.8 ± 0.05
8±1
33.0 ± 0.5
33.0 ± 3
2
1.0 ± 0.1
2.60
DK SP
FeCu
0.8 ± 0.05
8±1
35.0 ± 0.5
33.0 ± 3
2
1.0 ± 0.1
2.60
DK LP
FeCu
0.8 ± 0.05
8±1
33.0 ± 0.5
33.0 ± 3
2
1.0 ± 0.1
2.60
Document Number: 28730
10
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
AC, AC-AT
www.vishay.com
Vishay Draloric
Z-FORM LEADS FOR SMD MOUNTING in millimeters
A
L
a
I
ØD
LEAD BENDING STYLE = WSZ
(Z-form)
b
H
F
E
Solder pad dimensions
Ød
TYPE WSZ
Ød
Ø Dmax.
A
L
F
H
E
a
b
l
AC03, AC03-AT
13
4.8
17 ± 0.3
11 - 12
4.8 ± 0.2
3.6 ± 0.2
5.0 ± 0.4
2.5
5.5
14.5
AC01, AC01-AT WITH RADIAL TAPING
LEAD BENDING STYLE = RT (Radial Taped)
DIMENSIONS in millimeters
P
Pitch of components
P
12.7 ± 1.0
Lead spacing
F
5.0 + 0.6, - 0.1
Width of carrier tape
W
18.0 ± 0.5
Height for cutting (max.)
L1
11
Height for insertion (max.)
H1
32
H1
F
L1
W
Direction of Unreeling
AC03, AC03-AT WITH RADIAL TAPING
LEAD BENDING STYLE = RT (Radial Taped)
DIMENSIONS in millimeters
P
Pitch of components
H1
F
P
12.7 ± 1.0
Lead spacing
F
5.0 + 0.4, - 0.2
Width of carrier tape
W
18.0 ± 0.5
Height for cutting (max.)
L1
2.5
Height for insertion (max.)
H1
32
W
L1
Revision: 14-Mar-17
Document Number: 28730
11
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1
Document Number: 91000
Similar pages