Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email:[email protected] SAW BANDPASS FILTER PART NO.: ACTF2159-169.48125-0705 Features Bandpass filter for base station Ceramic Package for Surface Mounted Technology (SMT) Lead-free Production and RoHS Compliance Package Dimensions Pin Configuration 1 Input Ground 2 Input 6 Output Ground 7 Output 3,5,8,10 Ground 4,9 Case Ground Sign Data (unit: mm) Sign Data (unit: mm) A 7.0 E 0.6 B 5.0 F 1.0 C 1.27 G 1.5 D 2.54 Marking: Laser Marking Maximum Ratings Rating Source Power DC Voltage Value Unit P 15 dBm VDC 0 V Operating Temperature Range TA -40 ~ +85 °C Storage Temperature Range Tstg -40 ~ +85 °C -1- In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email:[email protected] Electrical Characteristics Reference temperature: Terminating source impedance: Terminating load impedance: TA = 25 ℃ ZS = 50 © ZL = 50 © Characteristic Min. Typ. Max. Unit Center frequency fC — 169.48125 — MHz Insertion attenuation @ 169.48125 MHz IL — 3.0 4.0 dB BW1 BW3 80 100 100 120 — kHz 0.3 1.0 dB Pass bandwidth ±rel d 1 dB ±rel d 3 dB ”± Passband ripple (p-p) fc± 30 kHz Relative attenuation Temperature Stability @Fc+-2.0MHz 40 45 @Fc+-5.0MHz 40 45 +25 +35 Turnover Temperature T0 +15 Frequency Temperature Coefficient FTC Frequency Aging Absolute Value during the First Year |fA| dB 2 ppm/℃ 0.032 d±10 DC Insulation Resistance between Any Two Pins ppm/yr 1.0 RoHS Compliant MΩ Electrostatic Sensitive Device Test Matching Network L1=220nH L2=82nH The L C value may change due to PCB Layout! -2- In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email:[email protected] Typical Frequency Response Environmental Characteristic Test item Condition of test 1 Mechanical shock (a) Drops: 3 times on concrete floor (b) Height: 1.0m 2 Vibration resistance (a) Frequency of vibration: 10~55Hz (c) Directions: X,Y and Z 3 Moisture resistance (a) Condition: 40°C, 90~95% R.H. (c) Wait 4 hours before measurement (a) +70℃ for 16 hours (b) +55℃ for 24 hours, 90~95% R.H. (c) -25℃ for 2 hours (d) +40℃ for 24 hours, 90~95% R.H. (e) Wait 4 hours before measurement (a) Temperature: 70°C (b) Duration: 250 hours (c) Wait 4 hours before measurement 4 Climatic sequence 5 High Temperature Exposure 6 Thermal impact Requirements (b) Amplitude: 1.5mm (d) Duration: 2 hours (b) Duration: 96 hours The SAW filter shall remain within the electrical specifications after tests. (a) +70°C for 30 minutes ⇒ -25°C for 30 minutes repeated 3 times (b) Wait 4 hours before measurement -3- In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email:[email protected] Remarks 8-1 Static voltage Static voltage between signal load & ground may cause deterioration & destruction of the SAW filter. Please avoid static voltage. 8-2 Ultrasonic cleaning Ultrasonic vibration may cause deterioration & destruction of the SAW filter. Please avoid ultrasonic cleaning. 8-3 Soldering Only terminals of the SAW filter may be soldered. Please avoid soldering other parts of the SAW filter. Soldering Profile • • Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. For questions on technology, prices and delivery, please contact our sales offices or e-mail [email protected]. RoHS Compliant Electrostatic Sensitive Device -4- In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com