AZ2310 30 AMP MINIATURE POWER RELAY FEATURES • • • • • • Low cost 30 Amp switching 144 Amp inrush current Quick connect terminals Creepage distance more than 8 mm UL, CUR file E44211 CONTACTS Arrangement SPST N.O. (1 Form A) Ratings Resistive load: Max. switched power: 7500 VA Max. switched current: 30 A Max. switched voltage: 250 VAC Rated Load UL, CUR 30 A at 250 VAC Res. 2 HP 125/250 VAC GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 30 A 240 VAC Res. Operate Time (typical) 20 ms at nominal coil voltage Release Time (typical) 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength (at sea level for 1min) 4000 Vrms coil to contact 1200 Vrms between open contacts Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil volt age Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 105°C (221°F) Vibration 0.04" DA at 10–55 Hz TV-15 at 120 VAC Material Silver tin oxide Resistance < 30 milliohms initially (24 V, 1 A voltage drop method) COIL Power At Pickup Voltage (typical) 588 mW Max. Continuous Dissipation 2.0 W at 20°C (68°F) ambient Temperature Rise 30°C (54°F) at nominal coil voltage Temperature Shock Max. 105°C (221°F) Operating 10 g, 11 ms, 1/2 sine (no false operation) Non-Operating 100 g, 11 ms, 1/2 sine (no damage) Enclosure P.B.T. polyester Terminals Tinned copper alloy P. C. & quick connect Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. NOTES Weight 55 grams 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 11/30/05W AZ2310 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 3 Must Operate VDC 2.1 Max. Continuous VDC 3.9 ORDER NUMBER Coil Resistance ± 10% 7.5 Form A (SPST N.O.) AZ2310–1A–3D 6.3 20 AZ2310–1A–5D 5 3.5 6 4.2 7.7 30 AZ2310–1A–6D 9 6.3 11.6 67 AZ2310–1A–9D 12 8.4 15.5 120 AZ2310–1A–12D 24 16.8 31.0 480 AZ2310–1A–24D 48 33.6 62.0 1920 AZ2310–1A–48D 60 42.2 77.5 3000 AZ2310–1A–60D MECHANICAL DATA NO MOUNTING HOLE LAYOUT .177 [4.5] 1.291 [32.8] COM .866 [22.0] 2 x ø.177 [ø4.5] 1.713 [43.5] 1.713 [43.5] 1.988 [50.5] 2 x .250 [6.3] 2 x .187 [4.7] 2 x .354 [9.0] WIRING DIAGRAM NO 1.409 [35.8] 4 x .032 [0.8] .965 [24.5] .098 [2.5] COM 2 x .295 [7.5] Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 11/30/05W