10/100Base-TX Module for Dual-Port Applications ELECTRONICS INC. EPF8135S & EPF8135S-RC • Recommended for use with Level One LXT974, LXT975, LXT98, LXT981, LXT982 & LXT983 • Complies with or exceeds IEEE 802.3, 10/100Base-TX Standards • Guaranteed to operate with 8 mA DC Bias at 70°C • Add “-RC” after part number for RoHS Compliant • Transfer Molded Part Electrical Parameters @ 25° C OCL @ 70°C Insertion Loss (dB Max.) Return Loss (dB Min.) 100 KHz, 0.1 Vrms 8 mA DC Bias 0.1-100 MHz 1-30 MHz 80 MHz 100 MHz 1-100 MHz 200 MHz 300 MHz 500 MHz Media Side Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv 350 µH -1/-1 -18/-18 -12/-12 -9/-9 -30/-25 -25/-20 -20/-10 -15/--- • Common Mode Rejection (dB Min.) Chip Side .090 (2.29) .050 (1.27) .085 (2.16) 40 .670 (17.02) 21 Solder Pad Layout 1 .030 (.762) .010/.015 (.254/.381) .050 (1.27) .016/.022 (.406/.559) .008/.012 (.203/.305) 0°-8° .035 (.889) 39 3 38 4 37 12 29 13 28 14 27 Receive Channel 1:1 6 35 7 34 33 1:1 16 25 17 24 18 23 EPF8135S EPF8135S-RC 1. Lead Finish SnPb Hot Dipped Sn 2. Peak Temperature Rating 225°C 3. Moisture Sensitive Levels MSL = 3 (168 Hours, ≤30°C/60%RH) 4. Weight 5. Packaging Information (Tube) (Tape & Reel) Cable Side 2 8 .600 (15.24) Notes : Transmit Channel 2CT:1CT 2CT:1CT 20 .950 (24.13) .260 (6.60) -30 Schematic 1.120 (28.45) .480 (12.19) 0.1-100 MHz Cable Side Impedance : 100 Ω • Isolation : 1500 Vrms • Package PCA EPF8135S(-RC) Date Code Crosstalk (dB Min.) 245°C MSL = 4 (72 Hours, ≤30°C/60%RH) 5.5 grams 5.5 grams 18 pieces/tube 18 pieces/tube 350 pieces/13” reel 350 pieces/13” reel Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSF8135S Rev. 3 9/2/08 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com