Leaded Oscillator, OCXO Metal Package, 27 mm X 36 mm Frequency Output Level Level Duty Cycle Rise / Fall Time Output Load Supply Voltage Current (Warm Up) Current @ +25 C Control Voltage (“V” option) Slope Temperature Operating Storage Environmental Package Information 1.000 MHz to 150.000 MHz TTL HC-MOS ‘0’= 0.4 VDC Max., ‘1’ = 2.4 VDC Min. ‘0’ = 0.1 Vcc Max., ‘1’= 4.5 VDC Min. Specify 50% 10% or 5% See Table 10 nS Max. @ Fo < 16 MHz, 5 nS Max. @ Fo > 16 MHz 5 TTL See Table See Supply Voltage Table 500 mA @ 5 VDC, 350 mA @ 12 VDC Max. 250 mA @ 5 VDC, 120 mA @ 12 VDC Typ. 2.5 VDC 2.0 VDC, 8 ppm Min. for AT cut Positive Part Number Guide Package I405 - Input Voltage 5 = 5.0V I405 Series Operating Temperature 7 = 0 C to +50 C Sine +4 dBm, 3 dBm N.A. N.A. 50 Ohms See Operating Temperature Table -40 C to +85 C See Appendix B for information MSL = N.A., Termination = e1 Sample Part Number: Symmetry (Duty Cycle) 5 = 45 / 55 Max. 6 = 40 / 60 Max. I405 - 5151YVA - 20.000 MHz Output Stability (in ppm) Voltage Control Crystal Cut 1 = 10TTL / 15 pF HC-MOS Y = 0.5 V = Controled A = AT 3 = 15 pF HC-MOS 1 = 0.25 9 = 12V 1 = 0 C to +70 C 3 = 3.3V 6 = -10 C to +70 C 6 = 30 pF 2 = 0.1 3 = -20 C to +70 C A = Sine 3 = 0.05 * F = Fixed S = SC 5 = 0.015 * NOTE: A 0.01 µF bypass capacitor is recommended between Vcc (pin 4) and Gnd (pin 2) to minimize power supply noise. * - Not available for all temperature ranges. 12/10_A Frequency ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com Specifications subject to change without notice - 20.000 MHz