LL41 www.vishay.com Vishay Semiconductors Small Signal Schottky Diode FEATURES • For general purpose applications • This diode features low turn-on voltage and high breakdown voltage • This device is protected by a PN junction guardring against excessive voltage, such as electrostatic discharges MECHANICAL DATA • This diode is also available in the DO-35 case with type designation BAT41 Case: MiniMELF SOD-80 • AEC-Q101 qualified Weight: approx. 31 mg • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Cathode band color: black Packaging codes/options: GS18/10K per 13" reel (8 mm tape), 10K/box GS08/2.5K per 7" reel (8 mm tape), 12.5K/box PARTS TABLE PART ORDERING CODE INTERNAL CONSTRUCTION REMARKS LL41 LL41-GS18 or LL41-GS08 Single diode Tape and reel ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER SYMBOL VALUE Repetitive peak reverse voltage TEST CONDITION VRRM 100 V Forward continuous current (1) IF 100 mA tp < 1 s, < 0.5 IFRM 350 mA tp = 10 ms IFSM 750 mA Tamb = 65 °C Ptot 200 mW Repetitive peak forward current (1) Surge forward current (1) Power dissipation (1) UNIT Note (1) Valid provided that electrodes are kept at ambient temperature THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT RthJA 300 (1) K/W Tj 125 °C Ambient operating temperature range Tamb - 65 to + 125 °C Storage temperature range Tstg - 65 to + 150 °C Thermal resistance junction to ambient air Junction temperature Note (1) Valid provided that electrodes are kept at ambient temperature ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Reserve breakdown voltage (1) Leakage current (1) Forward voltage (1) Diode capacitance TEST CONDITION SYMBOL MIN. TYP. IR = 100 μA V(BR) 100 110 VR = 50 V, Tj = 25 °C IR VR = 50 V, Tj = 100 °C IR IF = 1 mA VF IF = 200 mA VF VR = 1 V, f = 1 MHz CD 400 2 MAX. UNIT 100 nA V 20 μA 450 mV 1000 mV pF Note (1) Pulse test, t = 300 μs p Rev. 1.7, 09-May-12 Document Number: 85671 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LL41 www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 5.0 250 CD - Diode Capacitance (pF) Ptot- Power Dissipation (mW) 4.5 200 150 100 50 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 0 20225 50 100 Tamb - Ambient Temperature (°C) 0 150 20227 Fig. 1 - Admissible Power Dissipation vs. Ambient Temperature 5 10 15 20 25 30 35 40 VR - Reverse Voltage (V) Fig. 4 - Typical Capacitance vs. Reverse Voltage IR - Reverse Leakage Current (nA) 100000 Tj = 125 °C 10000 100 °C 75 °C 1000 50 °C 100 25 °C 10 1 0 10 20 30 40 50 60 70 80 90 100 VR - Reverse Voltage (V) 20226 Fig. 2 - Typical Reverse Characteristics I F - Forward Current (mA) 1000 100 T j = 125 ° C 10 1 - 40 °C 0.1 25 °C 0.01 0 18641 200 400 600 800 1000 1200 VF - Forward Voltage (mV) Fig. 3 - Typical Forward Characteristics Rev. 1.7, 09-May-12 Document Number: 85671 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LL41 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): MiniMELF SOD-80 1.6 (0.063) 1.4 (0.055) Cathode indification * 0.47 (0.019) max. 3.7 (0.146) 3.3 (0.130) * The gap between plug and glass can be either on cathode or anode side Foot print recommendation: 1.25 (0.49) min. 2 (0.079) min. 2.5 (0.098) max. 5 (0.197) ref. Document no.:6.560-5005.01-4 Rev. 8 - Date: 07.June.2006 96 12070 Rev. 1.7, 09-May-12 Document Number: 85671 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: LL41-GS08 LL41-GS18