FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High-Speed, 2.7V to 12V, Rail-to-Rail Amplifiers Features at ±5V Description ■ 2.5mA supply current per amplifier The FHP3130 (single), FHP3230 (dual), and FHP3430 (quad) are low-cost, high-performance, voltage feedback amplifiers that consume only 2.5mA of supply current per channel, while providing ±100mA of output current. These amplifiers are designed to operate from 2.7V to 12V (±6V) supplies. The common mode voltage range includes the negative rail and the output provides rail-to-rail performance. ■ 0.008%/0.01° differential gain/phase ■ 10MHz 0.1dB bandwidth ■ Output voltage range at RL = 150W: -4.8V to 4.8V ■ Input includes negative rail ■ 110V/µs slew rate ■ ±100mA output current The FHP3130, FHP3230, and FHP3430 are designed on a complimentary bipolar process and provide 170MHz of bandwidth and 110V/µs of slew rate at a supply voltage of ±5V. The combination of low power, rail-to-rail performance, low-voltage operation, and tiny package options make these amplifiers well suited for use in many generalpurpose, high-speed applications. ■ 17nV/√Hz input voltage noise ■ >100dB PSRR, CMRR, and open-loop gain ■ FHP3130 – improved replacement for KM4100 ■ FHP3230 – improved replacement for KM4200 ■ FHP3130 lead-free package options ■ ■ ■ ■ (SOT23-5, SOIC-8) FHP3230 lead-free package options (MSOP-8, SOIC-8) FHP3430 lead-free package options (TSSOP-14, SOIC-14) RoHS compliant Fully specified at +3V, +5V, and ±5V supplies These amplifiers also provide excellent video specifications. They offer extremely low differential gain and phase (0.008%/0.01°) and 0.1dB gain flatness to 10MHz for superb standard definition video performance. Their output drive capability effortlessly supports four video loads. Applications 0.01 Differential Gain (%) ■ CCD imaging systems ■ CD/DVD ROM ■ Coaxial cable drivers ■ Portable/battery-powered applications ■ Twisted-pair driver ■ Video driver 0.008 0.006 0.006 Gain 0.004 0.004 0.002 0.002 Phase 0 0 -0.002 -0.002 -0.004 -0.004 -0.006 -0.006 -0.008 -0.008 -0.01 Differential Phase (deg) ■ Active filters 0.01 Vs = ±5V RL = 150Ω 0.008 ■ A/D driver -0.01 -0.7 -0.5 -0.3 -0.1 0.1 0.3 0.5 0.7 Input Voltage (V) Ordering Information Part Number FHP3130IS5X FHP3130IM8X FHP3230IMU8X FHP3230IM8X FHP3430IMTC14X FHP3430IM14X Package Pb-Free Operating Temperature Range Packaging Method SOT23-5 SOIC-8 MSOP-8 SOIC-8 TSSOP-14 SOIC-14 Yes Yes Yes Yes Yes Yes -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C Reel Reel Reel Reel Reel Reel Moisture sensitivity level for all parts is MSL-1. © 2006 Fairchild Semiconductor Corporation FHP3130, FHP3230, FHP3430 Rev. 3.0.2 www.fairchildsemi.com FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High-Speed, 2.7V to 12V, Rail-to-Rail Amplifiers October 2006 YIN 75Ω 1/2 FHP3230 1kΩ CIN YOUT 1kΩ 75Ω 1kΩ FHP3230 OUT1 1 8 -IN1 2 7 4 7 -Vs +Vs OUT2 6 -IN2 5 +IN2 FHP3130 SOT23 OUT 1 -Vs 2 +IN 3 75Ω Pin Assignments FHP3230 SOIC/MSOP 3 COUT 1kΩ Pin Configurations +IN1 75Ω 1/2 FHP3230 +Vs 5 + - Pin # Name 1 OUT1 2 -IN1 Negative Input, channel 1 3 +IN1 Positive Input, channel 1 4 -Vs 5 +IN2 Positive Input, channel 2 6 -IN2 Negative Input, channel 2 7 OUT2 8 +Vs 1 8 NC -IN1 2 7 +Vs +IN1 3 6 OUT -Vs 4 5 NC FHP3430 SOIC/TSSOP Negative supply Output, channel 2 Positive supply Pin # SOT/SOIC Name 1/6 OUT Output 2/4 -Vs Negative supply 3/3 +IN Positive Input 4/2 -IN Negative Input 5/7 +Vs Positive supply na / 1, 5, 8 NC No Connect FHP3130 SOIC NC Output, channel 1 FHP3130 -IN 4 Description Description FHP3430 Pin # Name 1 OUT1 Description Output, channel 1 2 -IN1 Negative Input, channel 1 3 +IN1 Positive Input, channel 1 4 +Vs Positive supply 5 +IN2 Positive Input, channel 2 Negative Input, channel 2 OUT1 1 14 OUT4 6 -IN2 -IN1 2 13 -IN4 7 OUT2 Output, channel 2 +IN1 3 12 +IN4 8 OUT3 Output, channel 3 9 -IN3 Negative Input, channel 3 10 +IN3 Positive Input, channel 3 11 -Vs 12 +IN4 Positive Input, channel 4 13 -IN4 Negative Input, channel 4 14 OUT4 4 11 -Vs +IN2 5 10 +IN3 -IN2 6 9 -IN3 OUT2 7 8 OUT3 4 +Vs © 2006 Fairchild Semiconductor Corporation FHP3130, FHP3230, FHP3430 Rev. 3.0.2 Negative supply Output, channel 4 www.fairchildsemi.com FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High-Speed, 2.7V to 12V, Rail-to-Rail Amplifiers Typical Application - YC Video Line Driver The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table defines the conditions for actual device operation. Parameter Min. Max. Unit 0 13.3 V -Vs -0.5V +Vs +0.5V V Supply Voltage Input Voltage Range Reliability Information Parameter Min. Typ. Junction Temperature Storage Temperature Range -65 Lead Temperature (Soldering, 10s) Max. Unit 150 °C 150 °C 300 °C Thermal Resistance 8-Lead SOIC(1) 155 °C/W 8-Lead MSOP 246 °C/W 5-Lead SOT23(1) 296 °C/W 14-Lead TSSOP 140 °C/W 14-Lead SOIC(1) 128 °C/W (1) (1) Notes: 1. Package thermal resistance (qJA), JDEC standard, multi-layer test boards, still air. ESD Protection Product FHP3130 Package FHP3230 FHP3430 SOT23 SOIC SOIC MSOP SOIC TSSOP Human Body Model (HBM) 3.5kV >4kV 3.5kV 3.5kV 3kV 5kV Charged Device Model (CDM) >2kV >2kV 2kV 1.5kV 2kV 1.5kV Recommended Operating Conditions Max. Unit Operating Temperature Range Parameter -40 +85 °C Supply Voltage Range 2.7 12 V © 2006 Fairchild Semiconductor Corporation FHP3130, FHP3230, FHP3430 Rev. 3.0.2 Min. Typ. www.fairchildsemi.com FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High-Speed, 2.7V to 12V, Rail-to-Rail Amplifiers Absolute Maximum Ratings TA = 25°C, Vs = 3V, RL = 2kW to Vs/2, G = 2, Rf = Rg =1kW; unless otherwise noted. Symbol Parameter Conditions Min. Typ. Max. Units Frequency Domain Response UGBW -3dB Bandwidth G = +1, VOUT = 0.2Vpp 160 MHz BWss -3dB Bandwidth G = +2, VOUT = 0.2Vpp 50 MHz BWLs Full Power Bandwidth G = +2, VOUT = 1Vpp 45 MHz BW0.1dBss 0.1dB Bandwidth G = +2, RL = 150kW, VOUT = 0.2Vpp 11.5 MHz GBWP Gain Bandwidth Product G = +6, VOUT = 0.2Vpp 60 MHz Time Domain Response tR, tF Rise and Fall Time VOUT = 0.2V step 12 ns tS Settling Time to 0.1% VOUT = 2V step 90 ns OS Overshoot VOUT = 0.2V step 1 % SR Slew Rate VOUT = 2V step, G = -1 90 V/µs Distortion/Noise Response HD2 2nd Harmonic Distortion VOUT = 1Vpp, 5MHz 50 dBc HD3 3rd Harmonic Distortion VOUT = 1Vpp, 5MHz 50 dBc THD Total Harmonic Distortion VOUT = 2Vpp, 5MHz, RL = 100W, G = -1 50 dB en Input Voltage Noise > 100kHz 17 nV/√Hz XTALK Crosstalk FHP3230, FHP3430 at 1MHz 62 dB 1 mV Average Drift 5 µV/°C Input Bias Current -1.8 µA DC Performance VIO dVIO Ib dIb Input Offset Voltage Average Drift IIO Input Offset Current PSRR Power Supply Rejection Ratio AOL Open-Loop Gain IS Supply Current per Amplifier 4 nA/°C 0.01 µA DC 100 dB DC, RL = 150W 100 dB 2.5 mA kW pF Input Characteristics RIN Input Resistance 500 CIN Input Capacitance <1.5 CMIR Input Common Mode V Range CMRR Common Mode Rejection Ratio -0.3 to 2 V DC, VCM = 0V to Vs - 1.5 95 dB RL = 2kW to Vs/2, G = -1 0.05 to 2.95 V 0.1 to 2.9 V ±100 mA ±120 mA Output Characteristics VOUT Output Voltage Swing RL = 150W to Vs/2, G = -1 IOUT Linear Output Current ISC Short-Circuit Output Current © 2006 Fairchild Semiconductor Corporation FHP3130, FHP3230, FHP3430 Rev. 3.0.2 VOUT = Vs/2 www.fairchildsemi.com FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High-Speed, 2.7V to 12V, Rail-to-Rail Amplifiers Electrical Characteristics at +3V TA = 25°C, Vs = 5V, RL = 2kW to Vs/2, G = 2, Rf = Rg =1kW; unless otherwise noted. Symbol Parameter Conditions Min. Typ. Max. Units Frequency Domain Response UGBW -3dB Bandwidth G = +1, VOUT = 0.2Vpp 165 MHz BWss -3dB Bandwidth G = +2, VOUT = 0.2Vpp 50 MHz BWLs Full Power Bandwidth G = +2, VOUT = 2Vpp 30 MHz BW0.1dBss 0.1dB Bandwidth G = +2, RL = 150kW, VOUT = 0.2Vpp 18 MHz GBWP Gain Bandwidth Product G = +6, VOUT = 0.2Vpp 60 MHz Time Domain Response tR, tF Rise and Fall Time VOUT = 0.2V step 12 ns tS Settling Time to 0.1% VOUT = 2V step 90 ns OS Overshoot VOUT = 0.2V step 1 % SR Slew Rate VOUT = 2V step, G = -1 105 V/µs Distortion / Noise Response HD2 2nd Harmonic Distortion VOUT = 2Vpp, 5MHz 56 dBc HD3 3rd Harmonic Distortion VOUT = 2Vpp, 5MHz 65 dBc THD Total Harmonic Distortion VOUT = 2Vpp, 5MHz 55 dB en Input Voltage Noise > 100kHz 17 nV/√Hz XTALK Crosstalk FHP3230, FHP3430 at 1MHz 62 dB DG Differential Gain NTSC (3.58MHz), RL = 150W, AC-coupled into 220µF, Vs = ±2.5V 0.02 % DP Differential Phase NTSC (3.58MHz), RL = 150W, AC-coupled into 220µF, Vs = ±2.5V 0.04 ° 1 mV Average Drift 5 µ���� V/°C Input Bias Current -1.8 µ� A DC Performance VIO dVIO Ib dIb Input Offset Voltage Average Drift IIO Input Offset Current PSRR Power Supply Rejection Ratio AOL Open-Loop Gain IS Supply Current per Amplifer 4 nA/°C 0.01 µ� A DC 100 dB DC, RL = 150W 100 dB 2.5 mA kW pF Input Characteristics RIN Input Resistance 500 CIN Input Capacitance <1.5 CMIR Input Common Mode V Range CMRR Common Mode Rejection Ratio DC, VCM = 0V to Vs - 1.5 -0.3 to 4 V 95 dB 0.05 to 4.95 V 0.1 to 4.9 V ±100 mA ±120 mA Output Characteristics RL = 2kW to Vs/2 VOUT Output Voltage Swing RL = 150W to Vs/2 IOUT Linear Output Current ISC Short-Circuit Output Current © 2006 Fairchild Semiconductor Corporation FHP3130, FHP3230, FHP3430 Rev. 3.0.2 VOUT = Vs/2 www.fairchildsemi.com FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High-Speed, 2.7V to 12V, Rail-to-Rail Amplifiers Electrical Characteristics at +5V TA = 25°C, Vs = ±5V, RL = 2kW to GND, G = 2, Rf = Rg =1kW; unless otherwise noted. Symbol Parameter Conditions Min. Typ. Max. Units Frequency Domain Response UGBW -3dB Bandwidth G = +1, VOUT = 0.2Vpp 170 MHz BWss -3dB Bandwidth G = +2, VOUT = 0.2Vpp 50 MHz BWLs Full Power Bandwidth G = +2, VOUT = 2Vpp 30 MHz BW0.1dBss 0.1dB Bandwidth G = +2, RL = 150W, VOUT = 0.2Vpp 10 MHz GBWP Gain Bandwidth Product G = +6, VOUT = 0.2Vpp 60 MHz Time Domain Response tR, tF Rise and Fall Time VOUT = 0.2V step 12 ns tS Settling Time to 0.1% VOUT = 2V step 90 ns OS Overshoot VOUT = 0.2V step 1 % SR Slew Rate VOUT = 2V step, G = -1 110 V/µs Distortion/Noise Response HD2 2nd Harmonic Distortion VOUT = 2Vpp, 5MHz 65 dBc HD3 3rd Harmonic Distortion VOUT = 2Vpp, 5MHz 65 dBc THD Total Harmonic Distortion VOUT = 2Vpp, 5MHz 54 dB en Input Voltage Noise > 100kHz 17 nV/√Hz XTALK Crosstalk FHP3230, FHP3430 at 1MHz 62 dB DG Differential Gain NTSC (3.58MHz), RL = 150W, AC-coupled into 220µF 0.008 % DP Differential Phase NTSC (3.58MHz), RL = 150W, AC-coupled into 220µF 0.01 ° DC Performance VIO dVIO Ib dIb Input Offset Voltage(1) -6 Average Drift 1 6 5 Input Bias Current(1) -4 Average Drift mV µ���� V/°C -1.8 µ� A 4 nA/°C IIO Input Offset Current(1) -0.8 0.01 PSRR Power Supply Rejection Ratio(2) DC 80 100 AOL Open-Loop Gain(2) DC, RL = 150W 80 100 IS Supply Current per Amplifier(1) 2.5 0.8 µ� A dB dB 3.5 mA Input Characteristics RIN Input Resistance 500 CIN Input Capacitance CMIR Input Common Mode V Range CMRR Common Mode Rejection Ratio (2) DC, VCM = -5V to 3.5V 75 <1.5 kW pF -5 to 4 V 100 dB Output Characteristics VOUT Output Voltage Swing IOUT Linear Output Current ISC Short-Circuit Output Current ±4.95 RL = 2kW RL = 150W(1) VOUT = 0V -4.65 ±4.7 4.65 V V ±100 mA ±120 mA Notes: 1. 100% tested at 25°C 2. Min/max guaranteed by design/characterization. © 2006 Fairchild Semiconductor Corporation FHP3130, FHP3230, FHP3430 Rev. 3.0.2 www.fairchildsemi.com FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High-Speed, 2.7V to 12V, Rail-to-Rail Amplifiers Electrical Characteristics at ±5V TA = 25°C, Vs = 5V, RL = 2kW to Vs/2 for Vs = 5V and 3V, RL = 2kW to GND for Vs = ±5V, G = 2, Rf = Rg = 1kW; unless otherwise noted. 1 0 G=1 Rf = 0 -1 Normalized Gain (dB) Normalized Gain (dB) 1 G = 10 -2 G=5 -3 G=2 -4 -5 Vs = ±5V VOUT = 0.2Vpp -6 0 G = -1 -1 G = -10 -2 G = -5 -3 G = -2 -4 -5 Vs = ±5V VOUT = 0.2Vpp -6 -7 -7 0.1 1 10 100 1000 0.1 1 Frequency (MHz) Figure 1. Non-Inverting Freq. Response (±5V) 1000 1 0 -1 G=1 Rf = 0 G = 10 -2 Normalized Gain (dB) Normalized Gain (dB) 100 Figure 2. Inverting Freq. Response (±5V) 1 G=5 -3 G=2 -4 -5 Vs = +5V VOUT = 0.2Vpp -6 0 G = -1 -1 G = -10 -2 G = -5 -3 G = -2 -4 -5 Vs = +5V VOUT = 0.2Vpp -6 -7 -7 0.1 1 10 100 1000 0.1 1 Frequency (MHz) 10 100 1000 Frequency (MHz) Figure 3. Non-Inverting Freq. Response (+5V) Figure 4. Inverting Freq. Response (+5V) 1 1 0 G=1 Rf = 0 -1 Normalized Gain (dB) Normalized Gain (dB) 10 Frequency (MHz) G = 10 -2 G=5 -3 G=2 -4 -5 Vs = +3V VOUT = 0.2Vpp -6 0 G = -1 -1 G = -10 -2 G = -5 -3 G = -2 -4 -5 Vs = +3V VOUT = 0.2Vpp -6 -7 -7 0.1 1 10 100 1000 0.1 Frequency (MHz) 10 100 1000 Frequency (MHz) Figure 5. Non-Inverting Freq. Response (+3V) © 2006 Fairchild Semiconductor Corporation FHP3130, FHP3230, FHP3430 Rev. 3.0.2 1 Figure 6. Inverting Freq. Response (+3V) www.fairchildsemi.com FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High-Speed, 2.7V to 12V, Rail-to-Rail Amplifiers Typical Performance Characteristics TA = 25°C, Vs = 5V, RL = 2kW to Vs/2 for Vs = 5V and 3V, RL = 2kW to GND for Vs = ±5V, G = 2, Rf = Rg = 1kW; unless otherwise noted. 1 Vs = +3V VOUT = 0.2Vpp 0 Normalized Gain (dB) Normalized Gain (dB) 1 CL = 2000pF RS = 5Ω -1 CL = 1000pF RS = 6.5Ω -2 -3 CL = 500pF RS = 10Ω -4 + -5 - -6 CL = 100pF RS = 20Ω Rs CL 1kΩ RL CL = 50pF RS = 15Ω 1kΩ 0 RL = 50Ω -1 RL = 5KΩ -2 RL = 150Ω -3 -4 RL = 1KΩ -5 Vs = +3V VOUT = 0.2Vpp -6 -7 -7 0.1 1 10 100 1000 0.1 1 Frequency (MHz) Figure 7. Frequency Response vs. CL (+3V) 1000 0.2 0 -1 Normalized Gain (dB) Normalized Gain (dB) 100 Figure 8. ������������������������ Frequency Response vs. RL (+3V) 1 VOUT = 1Vpp -2 VOUT = 2Vpp -3 VOUT = 4Vpp -4 -5 G=2 Vs = +5V -6 -7 0 Vs = 3V -0.2 Vs = 5V -0.4 Vs = 10V -0.6 G=2 Rf = Rg = 1.5kΩ Vs = +5V RL = 150Ω (FHP3230) -0.8 -1 0.1 1 10 100 1000 0.1 1 10 100 Frequency (MHz) Frequency (MHz) Figure 9. Large Signal Freq. Response (±5V) Figure 10. Gain Flatness -40 -40 -45 -45 -50 -50 RL = 2KΩ Distortion (dBc) Distortion (dBc) 10 Frequency (MHz) -55 -60 RL = 5KΩ -65 RL = 150Ω RL = 1KΩ -70 -75 -80 -55 -60 -65 RL = 1KΩ -70 RL = 5KΩ RL = 2KΩ -75 RL = 150Ω -80 -85 -85 VOUT = 1Vpp -90 VOUT = 1Vpp -90 0.1 1 10 0.1 Frequency (MHz) Figure 11. HD2 vs. RL (+3V) © 2006 Fairchild Semiconductor Corporation FHP3130, FHP3230, FHP3430 Rev. 3.0.2 1 10 Frequency (MHz) Figure 12. HD2 vs. RL (+3V) www.fairchildsemi.com FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High-Speed, 2.7V to 12V, Rail-to-Rail Amplifiers Typical Performance Characteristics - Continued TA = 25°C, Vs = 5V, RL = 2kW to Vs/2 for Vs = 5V and 3V, RL = 2kW to GND for Vs = ±5V, G = 2, Rf = Rg = 1kW; unless otherwise noted. -40 -45 10MHz -50 Distortion (dBc) Distortion (dBc) -55 5MHz -60 -65 -70 -75 -80 -85 1MHz 5MHz 100KHz 1MHz -90 -95 -95 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 2.3 2.5 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 2.3 2.5 Output Amplitude (Vpp) Output Amplitude (Vpp) Figure 13. HD2 vs. VOUT (+5V) Figure 14. HD3 vs. VOUT (+5V) -20 0 -30 -10 -40 -20 -50 -30 PSRR (dB) CMRR (dB) 10MHz -85 100KHz -90 -40 -45 -50 -55 -60 -65 -70 -75 -80 -60 -70 -80 -40 -50 -60 -70 -90 -100 -80 Vs = ±5V -120 10k 100k Vs = ±5V -90 1M 10M 100M 10k 1G 100k Figure 15. CMMR vs. Frequency 0 70 -20 Gain Gain (dB) -80 Phase 30 -100 20 -120 10 -140 0 -160 -10 -180 Vs = ±5V -20 10k 100k Phase (deg) -60 Output Voltage (V) -40 50 40 -200 1M 10M 100M 3.25 3.0 2.75 2.50 2.25 2.0 1.75 1.50 1.25 1.0 0.75 0.50 0.25 0 -0.25 100M 1G RL = 150Ω RL = 75Ω G = -1 -2.0 1G -1.5 RL = 10KΩ -1.0 -0.5 0 0.5 1.0 1.5 2.0 Input Voltage (V) Frequency (Hz) Figure 17. Open-Loop Gain and Phase © 2006 Fairchild Semiconductor Corporation FHP3130, FHP3230, FHP3430 Rev. 3.0.2 10M Figure 16. PSRR vs. Frequency 80 60 1M Frequency (Hz) Frequency (Hz) Figure 18. Output Swing vs. Load (+3V) www.fairchildsemi.com FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High-Speed, 2.7V to 12V, Rail-to-Rail Amplifiers Typical Performance Characteristics - Continued TA = 25°C, Vs = 5V, RL = 2kW to Vs/2 for Vs = 5V and 3V, RL = 2kW to GND for Vs = ±5V, G = 2, Rf = Rg = 1kW; unless otherwise noted. 90 80 70 Crosstalk (dB) Input Voltage Noise (nV/√Hz) 100 60 50 40 30 20 10 0 0.0001 0.001 0.01 0.1 1 10 -30 -35 -40 -45 -50 -55 -60 -65 -70 -75 -80 -85 -90 100 0.1 1 Frequency (MHz) 10 100 Frequency (MHz) Figure 19. Input Voltage Noise (+3V) Figure 20. Crosstalk vs. Frequency (+3V) 2.5 0.6V Offset 2.0 No Offset 1.5 Voltage (V) Output Voltage (0.5V/div) 1.2V Offset -0.6V Offset -1.2V Offset 1.0 0.5 0 G=1 G=2 -0.5 0 Time (0.2µs/div) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Time (µs) Figure 21. Pulse Resp. vs. Common Mode Voltage Figure 22. Large Signal Pulse Response (+3V) 3.5 4.5 3.0 4.0 3.5 Voltage (V) Voltage (V) 2.5 2.0 1.5 1.0 3.0 2.5 2.0 1.5 1.0 0.5 0.5 0 0 G=2 -0.5 0 G=2 -0.5 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 Time (µs) Time (µs) Figure 23. Large Signal Pulse Response (+5V) © 2006 Fairchild Semiconductor Corporation FHP3130, FHP3230, FHP3430 Rev. 3.0.2 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Figure 24. Large Signal Pulse Response (±5V) 10 www.fairchildsemi.com FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High-Speed, 2.7V to 12V, Rail-to-Rail Amplifiers Typical Performance Characteristics - Continued TA = 25°C, Vs = 5V, RL = 2kW to Vs/2 for Vs = 5V and 3V, RL = 2kW to GND for Vs = ±5V, G = 2, Rf = Rg = 1kW; unless otherwise noted. Differential Gain (%) 0.03 0.01 0.008 0.02 0.01 Phase 0 0.01 0.04 0.03 Gain 0.02 0.05 0 -0.006 -0.008 -0.008 -0.04 -0.01 -0.01 -0.7 0.6 Input Voltage (V) -0.5 -0.3 -0.1 0.1 0.3 0.5 0.7 Input Voltage (V) Figure 25. Differential Gain and Phase (±2.5) © 2006 Fairchild Semiconductor Corporation FHP3130, FHP3230, FHP3430 Rev. 3.0.2 0 -0.03 -0.04 0.4 0.002 Phase 0 -0.004 -0.03 0.2 0.004 0.002 -0.006 -0.02 0 0.006 Gain 0.004 -0.002 -0.02 -0.2 0.008 -0.004 -0.01 -0.4 0.006 -0.002 -0.01 -0.6 0.01 Vs = ±5V RL = 150Ω AC coupled into 220µF Differential Phase (deg) RL = 150Ω AC coupled into 220µF Differential Phase (deg) 0.04 Differential Gain (%) 0.05 Figure 26. Differential Gain and Phase (±5) 11 www.fairchildsemi.com FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High-Speed, 2.7V to 12V, Rail-to-Rail Amplifiers Typical Performance Characteristics - Continued Maximum Power Dissipation (W) Driving Capacitive Loads The FREQUENCY RESPONSE VS. CL plot in Figure 7, illustrates the response of the FHP3230 Family. A small series resistance (Rs) at the output of the amplifier, illustrated in Figure 27, improves stability and settling performance. Rs values in the FREQUENCY RESPONSE VS. CL plot were chosen to achieve maximum bandwidth with less than 1dB of peaking. For maximum flatness, use a larger Rs. 1.6 1.4 TSSOP-14 1.2 SOIC-14 1.0 SOIC-8 0.8 MSOP-8 0.6 0.4 SOT23-5 0.2 0 -40 0 20 40 60 80 Ambient Temperature (°C) + - -20 Rs Figure 28. Maximum Power Derating Rf CL RL Overdrive Recovery Rg For an amplifier, an overdrive condition occurs when the output and/or input ranges are exceeded. The recovery time varies based on whether the input or output is overdriven and by how much the ranges are exceeded. The FHP3130/3230/3430 typically recovers in less than 50ns from an overdrive condition. Figure 29 shows the FHP3230 in an overdriven condition. Figure 27. Typical Topology for Driving Capactive Loads Power Dissipation The maximum internal power dissipation allowed is directly related to the maximum junction temperature. If the maximum junction temperature exceeds 150°C for an extended time, device failure may occur. 3.5 Vs = 3V G=5 RL = 2kΩ Rf = 1kΩ 3.0 The FHP3130, FHP3230, and FHP3430 are short-circuit protected; however, this may not guarantee that the maximum junction temperature (+150°C) is not exceeded under all conditions. RMS Power Dissipation can be calculated using the following equation: Output Voltage (V) 2.5 2.0 1.5 1.0 Input 0.5 Power Dissipation = Is * (Vs+ - Vs-) + (Vs+ - Vo(RMS)) * IOUT(RMS) 0 -0.5 where Is is the supply current, Vs+ is the positive supply pin voltage, Vs- is the negative supply pin voltage, Vo(RMS) is the RMS output voltage, and IOUT(RMS) is the RMS output current delivered to the load. 0 0.2 0.4 0.6 0.8 10 1.2 1.4 1.6 1.8 Time (µs) Figure 29. Overdrive Recovery Follow the maximum power derating curves shown in Figure 28 below to ensure proper operation. © 2006 Fairchild Semiconductor Corporation FHP3130, FHP3230, FHP3430 Rev. 3.0.2 12 www.fairchildsemi.com FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High-Speed, 2.7V to 12V, Rail-to-Rail Amplifiers Application Information 0.05 YIN 75Ω Differential Gain (%) 0 -0.05 -0.05 Phase -0.1 -0.1 -0.15 -0.15 -0.2 -0.2 Vs = ±5V RL = 37.5Ω -0.25 + 1/4 FHP3430 -0.7 - -0.5 + 1/4 FHP3430 1kΩ 75Ω 75Ω - -0.1 0.1 0.3 0.5 0.7 Figure 31. DG/DP of CV Summer Driving Four Video Loads CVOUT - 1kΩ + -0.3 Input Voltage (V) 1kΩ 1/4 FHP3430 -0.25 1kΩ 1kΩ CIN 0 Gain Differential Phase (deg) The bandwidth and differential gain/phase performance of the FHP3130/3230/3430 amplifiers make them well suited for video applications. Figure 30 shows a typical Composite Video Summer. The high output current capability allows for driving multiple video loads. Figure 31 shows the resulting differential gain/phase of this threeamplifier configuration driving four video loads, or 37.5W. 0.05 75Ω 1kΩ 500Ω 1kΩ 1kΩ Figure 30. Typical Composite Video Summer Layout Considerations Evaluation Board Information General layout and supply bypassing play major roles in high-frequency performance. Fairchild has evaluation boards to guide high-frequency layout and aid device testing and characterization. Follow the guidelines below as a basis for high-frequency layout: The following evaluation boards are available to aid testing and layout of these devices: Evaluation Board Products ■ Include 6.8µF and 0.01µF ceramic capacitors. KEB002 FHP3130IS5X ■ Place the 6.8µF capacitor within 0.75 inches of the power pin. KEB003 FHP3130IM8X KEB010 FHP3230IMU8X ■ Place the 0.01µF capacitor within 0.1 inches of the power pin. KEB006 FHP3230IM8X KEB012 FHP3430IMTC14X ■ Remove the ground plane under and around the part, especially near the input and output pins, to reduce parasitic capacitance. KEB018 FHP3430IM14X Evalutaion Board Schematics ■ Minimize all trace lengths to reduce series inductances. Refer to the evaluation board layouts shown below for more information. Evaluation board schematics and layouts are shown in Figures 32 – 46. These evaluation boards are built for dualsupply operation. Follow these steps to use the board in a single-supply application: 1. Short -Vs to ground. 2. Use C3 and C4 if the -Vs pin of the amplifier is not directly connected to the ground plane. © 2006 Fairchild Semiconductor Corporation FHP3130, FHP3230, FHP3430 Rev. 3.0.2 13 www.fairchildsemi.com FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High-Speed, 2.7V to 12V, Rail-to-Rail Amplifiers Composite Video Summer Figure 32. FHP3130 KEB002/KEB003 Schematic Figure 35. FHP3130 KEB003 (Top-side) Figure 33. FHP3130 KEB002 (Top-side) © 2006 Fairchild Semiconductor Corporation FHP3130, FHP3230, FHP3430 Rev. 3.0.2 14 www.fairchildsemi.com FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High-Speed, 2.7V to 12V, Rail-to-Rail Amplifiers Figure 34. FHP3130 KEB002 (Bottom-side) Figure 38. FHP3230 KEB006 (Top-side) Figure 37. FHP3230 KEB006/KEB010 Schematic Figure 39. FHP3230 KEB006 (Bottom-side) © 2006 Fairchild Semiconductor Corporation FHP3130, FHP3230, FHP3430 Rev. 3.0.2 15 www.fairchildsemi.com FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High-Speed, 2.7V to 12V, Rail-to-Rail Amplifiers Figure 36. FHP3130 KEB003 (Bottom-side) Figure 42. FHP3430 KEB012/KEB018 Schematic Figure 41. FHP3230 KEB010 (Bottom-side) Figure 43. FHP3430 KEB012 (Top-side) © 2006 Fairchild Semiconductor Corporation FHP3130, FHP3230, FHP3430 Rev. 3.0.2 16 www.fairchildsemi.com FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High-Speed, 2.7V to 12V, Rail-to-Rail Amplifiers Figure 40. FHP3230 KEB010 (Top-side) Figure 46. FHP3430 KEB018 (Bottom-side) Figure 45. FHP3430 KEB018 (Top-side) © 2006 Fairchild Semiconductor Corporation FHP3130, FHP3230, FHP3430 Rev. 3.0.2 17 www.fairchildsemi.com FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High-Speed, 2.7V to 12V, Rail-to-Rail Amplifiers Figure 44. FHP3430 KEB012 (Bottom-side) FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High-Speed, 2.7V to 12V, Rail-to-Rail Amplifiers Mechanical Dimensions Figure 47. SOIC-8 Package © 2006 Fairchild Semiconductor Corporation FHP3130, FHP3230, FHP3430 Rev. 3.0.2 18 www.fairchildsemi.com 3.00±0.10 (0.45) 0.65 A B (1.30) (5.50) (4.20) 4.90±0.15 3.00±0.10 PIN #1 ID QUADRANT LAND PATTERN RECOMMENDATION SEE DETAIL A TOP VIEW 1.10MAX 0.65 SIDE VIEW 0.150 0.050 0.380 C 0.270 0.10 0.23 0.13 END VIEW 12° TOP & BOTTOM A B C NOTES: A. CONFORMS TO JEDEC MO-187 B, DIMENSIONS ARE IN MM C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH, AND TIE BAR EXTRUSIONS D. DIMENSIONS AND TOLERANCES ARE PER ASME Y14.5M, 1994 E LANDPATTERN AS PER IPC7351 #TSOP65P490X110-8BL Gauge Plane Seating Plane 0.25 MKT-MUA08AREVB 0.70 0.40 0.95 8° 0° DETAIL A Figure 48. MSOP-8 Package © 2006 Fairchild Semiconductor Corporation FHP3130, FHP3230, FHP3430 Rev. 3.0.2 19 www.fairchildsemi.com FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High-Speed, 2.7V to 12V, Rail-to-Rail Amplifiers Mechanical Dimensions FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High-Speed, 2.7V to 12V, Rail-to-Rail Amplifiers Mechanical Dimensions Figure 49. SOIC-14 Package © 2006 Fairchild Semiconductor Corporation FHP3130, FHP3230, FHP3430 Rev. 3.0.2 20 www.fairchildsemi.com FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High-Speed, 2.7V to 12V, Rail-to-Rail Amplifiers Mechanical Dimensions Figure 50. TSSOP-14 Package © 2006 Fairchild Semiconductor Corporation FHP3130, FHP3230, FHP3430 Rev. 3.0.2 21 www.fairchildsemi.com CL DATUM 'A' b e 2 CL CL E e1 α C D CL A A2 E1 SYMBOL A A1 A2 b C D E E1 L e e1 α MIN 0.90 0.00 0.90 0.25 0.09 2.80 2.60 1.50 0.35 MAX 1.45 0.15 1.30 0.50 0.20 3.10 3.00 1.75 0.55 0.95 ref 1.90 ref 0 10 NOTE: A1 1. All dimensions are in millimeters. 2 Foot length measured reference to flat foot surface parallel to DATUM 'A' and lead surface. 3. Package outline exclusive of mold flash & metal burr. 4. Package outline inclusive of solder plating. 5. Comply to EIAJ SC74A. 6. Package ST 0003 REV A supercedes SOT-D-2005 REV C. Figure 51. SOT23-5 Package © 2006 Fairchild Semiconductor Corporation FHP3130, FHP3230, FHP3430 Rev. 3.0.2 22 www.fairchildsemi.com FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High-Speed, 2.7V to 12V, Rail-to-Rail Amplifiers Mechanical Dimensions FHP3130, FHP3230, FHP3430 Single, Dual, and Quad, High- Speed, 2.7V to 12V, Rail-to-Rail Amplifiers � Rev. I20 ©2006 Fairchild Semiconductor Corporation www.fairchildsemi.com