Fairchild HCPL2531M High speed transistor optocoupler Datasheet

PRELIMINARY
Single-Channel: 6N135M, 6N136M, HCPL2503M,
HCPL4502M, HCPL4503M
Dual-Channel: HCPL2530M, HCPL2531M
High Speed Transistor Optocouplers
Features
Description
■ High speed –1 MBit/s
The HCPL4502M, HCPL4503M, HCPL2503M, 6N135M,
6N136M, HCPL2530M and HCPL2531M optocouplers
consist of an AlGaAs LED optically coupled to a high
speed photodetector transistor.
■ Superior CMR – 10kV/µs
■ Dual-Channel HCPL2530M, HCPL2531M
■
■
■
■
■
■
(Preliminary)
CTR guaranteed 0–70°C
U.L. recognized (File # E90700, Vol. 2)
5,000Vrms (1 minute) isolation rating
Superior CMR of 15,000V/µs min. (HCPL4503M)
>8mm creepage and clearance (option T)
No base connection for improved noise immunity
(HCPL4502M, HCPL4503M)
A separate connection for the bias of the photodiode
improves the speed by several orders of magnitude over
conventional phototransistor optocouplers by reducing
the base-collector capacitance of the input transistor.
An internal noise shield provides superior common
mode rejection of up to 50,000V/µs.
Applications
■ Line receivers
■ Pulse transformer replacement
■ Output interface to CMOS-LSTTL-TTL
■ Wide bandwidth analog coupling
Schematics
N/C 1
Package Outlines
8 VCC
+ 1
8
8 VCC
1
V
F1
+ 2
7 VB
_
2
7 V01
8
V
8
F
_
3
6 VO
_
3
6 V02
1
1
V
F2
N/C 4
5 GND
6N135M, 6N136M, HCPL2503M,
HCPL4502M, HCPL4503M
+ 4
5 GND
HCPL2530M/HCPL2531M
Pin 7 is not connected in
HCPL4502M and HCPL4503M
©2008 Fairchild Semiconductor Corporation
6N13XM, HCPLXXXM Rev. 1.0.1
www.fairchildsemi.com
Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M
Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor Optocouplers
October 2008
PRELIMINARY
Symbol
Parameter
Condition
Value
Units
TSTG
Storage Temperature
-40 to +125
°C
TOPR
Operating Temperature
-40 to +100
°C
TSOL
Lead Solder Temperature
(Wave)
260 for 10 sec
°C
IF (avg)
DC/Average Forward Input
Current Each Channel(1)
25
mA
IF (pk)
Peak Forward Input Current
Each Channel(2)
50% duty cycle, 1ms P.W.
50
mA
IF (trans)
Peak Transient Input Current
Each Channel
≤1µs P.W., 300pps
1.0
A
VR
Reverse Input Voltage Each
Channel
5
V
PD
Input Power Dissipation Each
Channel
6N135M, 6N136M, HCPL2503M,
HCPL4502M, HCPL4503M
100
mW
HCPL2530M, HCPL2531M(3)
45
EMITTER
DETECTOR
IO (avg)
Average Output Current Each
Channel
8
mA
IO (pk)
Peak Output Current Each
Channel
16
mA
VEBR
Emitter-Base Reverse Voltage
5
V
VCC
Supply Voltage
-0.5 to 30
V
VO
Output Voltage
IB
Base Current
6N135M, 6N136M and HCPL2503M only
PD
Output Power Dissipation
Each Channel
6N135M, 6N136M and HCPL2503M only
-0.5 to 20
V
5
mA
6N135M, 6N136M, HCPL2503M,
HCPL4502M, HCPL4503M(4)
100
mW
HCPL2530M, HCPL2531M
35
mW
Notes:
1. Derate linearly above 70°C free-air temperature at a rate of 0.8mA/°C.
2. Derate linearly above 70°C free-air temperature at a rate of 1.6mA/°C.
3. Derate linearly above 70°C free-air temperature at a rate of 0.9 mW/°C.
4. Derate linearly above 70°C free-air temperature at a rate of 2.0 mW/°C.
©2008 Fairchild Semiconductor Corporation
6N13XM, HCPLXXXM Rev. 1.0.1
www.fairchildsemi.com
2
Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M
Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor Optocouplers
Absolute Maximum Ratings (TA = 25°C unless otherwise specified)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
PRELIMINARY
Individual Component Characteristics
Symbol
Parameter
Test Conditions
Device
Min.
Typ.*
Max.
Unit
1.7
V
EMITTER
VF
BVR
Input Forward Voltage
Input Reverse
Breakdown Voltage
∆VF/∆TA Temperature Coefficient
of Forward Voltage
IF = 16mA, TA =25°C
All
IF = 16mA
All
1.45
IR = 10 µA
All
IF = 16mA
All
-1.6
IF = 0mA, VO = VCC = 5.5V,
TA =25°C
All
0.003
0.5
IF = 0mA, VO = VCC = 15V,
TA =25°C
6N135M
6N136M
HCPL4502M
HCPL4503M
HCPL2503M
0.005
1
IF = 0mA, VO = VCC = 15V
All
1.8
5.0
V
mV/°C
DETECTOR
IOH
ICCL
ICCH
Logic High Output
Current
Logic Low Supply
Current
Logic High Supply
Current
µA
50
IF = 16mA, VO = Open,
VCC = 15V
6N135M
6N136M
HCPL4502M
HCPL4503M
HCPL2503M
145
200
IF1 = IF2 = 16mA,
VO = Open, VCC = 15V
HCPL2530M
HCPL2531M
250
400
IF = 0mA, VO = Open,
VCC = 15V, TA =25°C
6N135M
6N136M
HCPL4502M
HCPL4503M
HCPL2503M
1
IF = 0mA, VO = Open,
VCC = 15V
6N135M
6N136M
HCPL4502M
HCPL4503M
HCPL2503M
2
IF = 0mA, VO = Open,
VCC = 15V
HCPL2530M
HCPL2531M
0.02
µA
µA
4
*All Typicals at TA = 25°C
©2008 Fairchild Semiconductor Corporation
6N13XM, HCPLXXXM Rev. 1.0.1
www.fairchildsemi.com
3
Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M
Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor Optocouplers
Electrical Characteristics (TA = 0 to 70°C Unless otherwise specified)
PRELIMINARY
Transfer Characteristics
Symbol
Parameter
Test Conditions
Device
Min. Typ.* Max. Unit
COUPLED
CTR
Current Transfer
Ratio(5)
IF = 16mA, VO = 0.4 V,
VCC = 4.5V, TA =25°C
IF = 16mA,
VCC = 4.5V
VOL
Logic LOW Output
Voltage
6N135M
HCPL2530M
7
18
50
%
6N136M
HCPL4502M
HCPL4503M
HCPL2531M
19
30
50
%
HCPL2503M
12
27
%
VOL = 0.4V
6N135M
5
21
%
VOL = 0.5V
HCPL2530M
VOL = 0.4V
6N136M
HCPL4502M
HCPL4503M
15
30
%
9
30
%
VOL = 0.5V
HCPL2531M
VOL = 0.4V
HCPL2503M
IF = 16mA, IO = 1.1mA,
VCC = 4.5V, TA =25°C
IF = 16mA, IO = 3mA,
VCC = 4.5V, TA =25°C
6N135M
0.10
0.4
HCPL2530M
0.10
0.5
6N136M
HCPL2503M
HCPL4503M
0.15
0.4
HCPL2531M
0.15
0.5
IF = 16mA, IO = 0.8mA,
VCC = 4.5V
6N135M
HCPL2530M
0.5
IF = 16mA, IO = 2.4mA,
VCC = 4.5V
HCPL4502M
HCPL4503M
HCPL2531M
0.5
V
*All Typicals at TA = 25°C
Note:
5. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF,
times 100%.
©2008 Fairchild Semiconductor Corporation
6N13XM, HCPLXXXM Rev. 1.0.1
www.fairchildsemi.com
4
Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M
Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor Optocouplers
Electrical Characteristics (Continued) (TA = 0 to 70°C unless otherwise specified)
PRELIMINARY
Switching Characteristics (VCC = 5V)
Symbol Parameter
TPHL
TPLH
|CMH|
|CML|
Propagation Delay
Time to Logic LOW
Propagation Delay
Time to Logic HIGH
Common Mode
Transient
Immunity at
Logic High
Common Mode
Transient
Immunity at
Logic Low
Test Conditions
Device
Min.
Typ.*
Max.
Unit
TA = 25°C, RL = 4.1kΩ,
IF = 16mA(6) (Fig. 7)
6N135M
HCPL2530M
0.45
1.5
µs
RL = 1.9kΩ, IF = 16mA,
TA = 25°C(7) (Fig. 7)
6N136M
HCPL4502M
HCPL4503M
HCPL2503M
HCPL2531M
0.45
0.8
µs
RL = 4.1kΩ, IF = 16mA(6) (Fig. 7)
6N135M
HCPL2530M
2.0
µs
RL = 1.9kΩ, IF = 16mA(7) (Fig. 7)
6N136M
HCPL4502M
HCPL4503M
HCPL2503M
HCPL2531M
1.0
µs
TA = 25°C, (RL = 4.1kΩ,
IF = 16mA(6) (Fig. 7)
6N135M
HCPL2530M
0.5
1.5
µs
RL = 1.9kΩ, IF = 16mA(7) (Fig. 7)
TA = 25°C
6N136M
HCPL4502M
HCPL4503M
HCPL2503M
HCPL2531M
0.3
0.8
µs
RL = 4.1kΩ, IF = 16mA(6) (Fig. 7)
6N135M
HCPL2530M
2.0
µs
RL = 1.9kΩ, IF = 16mA(7) (Fig. 7)
6N136M
HCPL4502M
HCPL4503M
HCPL2503M
HCPL2531M
1.0
µs
IF = 0mA, VCM = 10VP-P,
RL = 4.1kΩ, TA = 25°C(8) (Fig. 8)
6N135M
HCPL2530M
10,000
V/µs
IF = 0mA, VCM = 10VP-P,
RL = 1.9kΩ, TA = 25°C(8) (Fig. 8)
6N136M
HCPL4502M
HCPL2503M
HCPL2531M
10,000
V/µs
IF = 0mA, VCM = 1,500VP-P,
RL = 1.9kΩ, TA = 25°C(8) (Fig. 8)
HCPL4503M
IF = 16mA, VCM = 10VP-P,
RL = 4.1kΩ, TA = 25°C(8) (Fig. 8)
6N135M
HCPL2530M
10,000
V/µs
IF = 16mA, VCM = 10VP-P,
RL = 1.9kΩ(8) (Fig. 8)
6N136M
HCPL4502M
HCPL2503M
HCPL2531M
10,000
V/µs
IF = 0mA, VCM = 1,500VP-P,
RL = 1.9kΩ, TA = 25°C(8) (Fig. 8)
HCPL4503M
15,000
15,000
30,000
30,000
** All Typicals at TA = 25°C
Notes:
6. The 4.1kΩ load represents 1 LSTTL unit load of 0.36mA and 6.1kΩ pull-up resistor.
7. The 1.9kΩ load represents 1 TTL unit load of 1.6mA and 5.6kΩ pull-up resistor.
8. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge
of the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO > 2.0V).
Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge
of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO < 0.8V).
©2008 Fairchild Semiconductor Corporation
6N13XM, HCPLXXXM Rev. 1.0.1
www.fairchildsemi.com
5
Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M
Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor Optocouplers
Electrical Characteristics (Continued) (TA = 0 to 70°C unless otherwise specified)
PRELIMINARY
Isolation Characteristics (TA = 0 to 70°C Unless otherwise specified)
Symbol
Characteristics
Test Conditions
Min
5,000
VISO
Withstand Insulation Test
Voltage
RH ≤ 50%, TA = 25°C, II-O ≤ 10µA,
t = 1 min., f = 50Hz(9)(11)
RI-O
Resistance (Input to Output)
VI-O = 500VDC(9)
CI-O
Capacitance (Input to Output) f = 1MHz, VI-O =
HFE
DC Current Gain
0V(9)
IO = 3mA, VO = 5V(9)
500VDC(10)
Typ**
Max
Unit
VRMS
1011
Ω
1
pF
150
II-I
Input-Input Insulation
Leakage Current
RH ≤ 45%, VI-I =
t = 5 s, (HCPL2530M/2531M only)
0.005
µA
RI-I
Input-Input Resistance
VI-I = 500 VDC(10)
(HCPL2530M/2531M only)
1011
Ω
CI-I
Input-Input Capacitance
f = 1MHz(10)
(HCPL2530M/2531M only)
0.03
pF
Notes:
9. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are
shorted together.
10. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together.
11. 5,000Vrms for 1 minute duration is equivalent to 6,000Vrms for 1 second duration.
©2008 Fairchild Semiconductor Corporation
6N13XM, HCPLXXXM Rev. 1.0.1
www.fairchildsemi.com
6
Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M
Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor Optocouplers
Electrical Characteristics (Continued) (TA = 0 to 70°C unless otherwise specified)
PRELIMINARY
Fig. 2 Normalized CTR vs. Temperature
1.2
1.0
1.0
NORMALIZED CTR
NORMALIZED CTR
Fig. 1 Normalized CTR vs. Forward Current
1.2
0.8
0.6
0.4
VO = 0.4 V
VCC = 5 V
TA = 25°C
Normalized to:
IF = 16 mA
0.2
0.0
0.1
1
0.8
0.6
0.4
IF = 16mA
VCC = 4.5V
VO = 0.4V
Normalized to:
TA = 25°C
0.2
10
0.0
-40
100
-20
0
20
IF - FORWARD CURRENT (mA)
IO – OUTPUT CURRENT (mA)
IOH – LOGIC HIGH OUTPUT CURRENT (nA)
18
16
IF = 40mA
14
35mA
12
30mA
10
25mA
8
20mA
6
15mA
4
10mA
2
5mA
2
4
6
8
10
12
14
80
100
16
18
100
IF = 0 mA
VCC = 5.5V
VO = 5.5V
10
1
0.1
-40
0
0
60
Fig. 4 Logic High Output Current
vs. Temperature
Fig. 3 Output Current vs. Output Voltage
TA = 25°C
VCC = 5 V
40
TA - TEMPERATURE (°C)
20
-20
0
20
40
60
80
100
TA – TEMPERATURE (°C)
VO – OUTPUT VOLTAGE (V)
Fig. 6 Propagation Delay vs. Load Resistance
Fig. 5 Propagation Delay vs. Temperature
800
TP - PROPAGATION DELAY (ns)
Tp – PROPAGATION DELAY (ns)
700
RL = 4.1kΩ (tPLH)
600
500
RL = 1.9kΩ (tPLH)
400
300
RL = 1.9kΩ (tPHL)
RL = 4.1kΩ (tPHL)
200
Frequency = 10kHz
Duty Cycle = 10%
IF = 16mA
VCC = 5 V
100
0
-40
-20
0
20
40
60
80
IF = 16mA (tPLH)
IF = 10mA (tPHL)
IF = 10mA (tPLH)
100
100
IF = 16mA (tPHL)
Frequency = 10kHz
Duty Cycle = 10%
IF = 16mA
VCC = 5 V
1
TA – TEMPERATURE (°C)
©2008 Fairchild Semiconductor Corporation
6N13XM, HCPLXXXM Rev. 1.0.1
1000
10
RL – LOAD RESISTANCE (kΩ)
www.fairchildsemi.com
7
Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M
Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor Optocouplers
Typical Performance Curves
PRELIMINARY
Pulse
Generator I
F
tr = 5ns
Z O = 50 Ω
10% D.C.
I/f < 100µs
1
Noise
Shield
8
+
2
7
VF
-
3
6
VCC
VB
Pulse
Generator
tr = 5ns
Z O = 50 Ω
+5 V
10% DUTY CYCLE
I/f < 100µS
RL
VO
4
Rm
5
IF
MONITOR
1
8
VCC
+5 V
RL
VF1
-
7
2
V01
VO
C L = 1.5 µF
3
6
4
5
VF2
+
Rm
C L = 1.5 µF
GND
Noise
Shield
+
-
VO
0.1 µF
I F Monitor
IF
V02
0.1 µF
GND
Test Circuit for HCPL2530M and HCPL2531M
Test Circuit for 6N135M, 6N136M, HCPL2503M, HCPL4502M and HCPL4503M
IF
0
5V
VO
1.5 V
1.5 V
VOL
TPHL
TPLH
Fig. 7 Switching Time Test Circuit
IF
1
Noise
Shield
8
+
2
A
B
7
VCC
+
+5 V
IF
VB
VF1
-
RL
Noise
Shield
1
8
VCC
+5 V
RL
2
7
3
6
4
5
V01
VO
A
VF
-
3
6
VO
B
VO
VFF
0.1 µF
VFF
4
5
+
GND
VF2
+
-
V02
0.1 µF
GND
VCM
-
+
Pulse Gen
VCM
-
Pulse Gen
Test Circuit for HCPL2530M and HCPL2531M
Test Circuit for 6N135M, 6N136M, HCPL2503M, HCPL4502M and HCPL4503M
VCM 10 V
0V
90%
90%
10%
10%
tr
tf
VO
5V
Switch at A : IF = 0 mA
VO
VOL
Switch at A : IF = 16 mA
Fig. 8 Common Mode Immunity Test Circuit
©2008 Fairchild Semiconductor Corporation
6N13XM, HCPLXXXM Rev. 1.0.1
www.fairchildsemi.com
8
Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M
Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor Optocouplers
Test Circuits
PRELIMINARY
Through Hole
0.4" Lead Spacing
PIN 1
ID.
4
3
2
PIN 1
ID.
1
4
3
2
1
0.270 (6.86)
0.250 (6.35)
5
6
7
0.270 (6.86)
0.250 (6.35)
8
5
6
0.070 (1.78)
0.045 (1.14)
0.020 (0.51) MIN
0.200 (5.08)
0.140 (3.55)
0.154 (3.90)
0.120 (3.05)
0.022 (0.56)
0.016 (0.41)
7
8
0.390 (9.91)
0.370 (9.40)
SEATING PLANE
SEATING PLANE
0.390 (9.91)
0.370 (9.40)
0.016 (0.40)
0.008 (0.20)
0.100 (2.54) TYP
0.070 (1.78)
0.045 (1.14)
0.004 (0.10) MIN
0.200 (5.08)
0.140 (3.55)
15° MAX
0.154 (3.90)
0.120 (3.05)
0.300 (7.62)
TYP
0.022 (0.56)
0.016 (0.41)
0.016 (0.40)
0.008 (0.20)
0.100 (2.54) TYP
Surface Mount
8-Pin DIP – Land Pattern (option S)
0.390 (9.91)
0.370 (9.40)
4
3
2
1
0.070 (1.78)
PIN 1
ID.
0.060 (1.52)
0.270 (6.86)
0.250 (6.35)
5
6
7
0° to 15°
0.400 (10.16)
TYP
0.100 (2.54)
8
0.295 (7.49)
0.070 (1.78)
0.045 (1.14)
0.020 (0.51)
MIN
0.022 (0.56)
0.016 (0.41)
0.100 (2.54)
TYP
Lead Coplanarity : 0.004 (0.10) MAX
0.415 (10.54)
0.300 (7.62)
TYP
0.030 (0.76)
0.016 (0.41)
0.008 (0.20)
0.045 [1.14]
0.315 (8.00)
MIN
0.405 (10.30)
MAX.
Note:
All dimensions are in inches (millimeters)
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
©2008 Fairchild Semiconductor Corporation
6N13XM, HCPLXXXM Rev. 1.0.1
www.fairchildsemi.com
9
Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M
Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor Optocouplers
Package Dimensions
PRELIMINARY
Option
Example Part Number
Description
No option
6N135M
S
6N135SM
SD
6N135SDM
T
6N135TM
0.4" lead spacing
V
6N135VM
IEC60747-5-2 (approval pending)
TV
6N135TVM
IEC60747-5-2 (approval pending); 0.4" lead spacing
SV
6N135SVM
IEC60747-5-2 (approval pending); surface mount
SDV
6N135SDVM
IEC60747-5-2 (approval pending); surface mount;
tape and reel
Standard through hole lead form
Surface mount lead bend
Surface mount; tape and reel
Marking Information
1
2503
XX YY
V
3
4
B
2
6
5
Definitions
1
Fairchild logo
2
Device number
3
IEC60747-5-2 mark (Note: Only appears on parts ordered with this
option – See order entry table)
©2008 Fairchild Semiconductor Corporation
6N13XM, HCPLXXXM Rev. 1.0.1
4
Two digit year code, e.g., ‘08’
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
www.fairchildsemi.com
10
Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M
Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor Optocouplers
Ordering Information
PRELIMINARY
D0
P0
t
K0
P2
E
F
A0
W1
d
t
P
User Direction of Feed
Symbol
W
W
B0
Description
D1
Dimension in mm
Tape Width
16.0 ± 0.3
Tape Thickness
0.30 ± 0.05
P0
Sprocket Hole Pitch
4.0 ± 0.1
D0
Sprocket Hole Diameter
1.55 ± 0.05
E
Sprocket Hole Location
1.75 ± 0.10
F
Pocket Location
7.5 ± 0.1
2.0 ± 0.1
P2
P
Pocket Pitch
A0
Pocket Dimensions
12.0 ± 0.1
10.30 ±0.20
B0
10.30 ±0.20
K0
4.90 ±0.20
W1
d
R
©2008 Fairchild Semiconductor Corporation
6N13XM, HCPLXXXM Rev. 1.0.1
Cover Tape Width
13.2 ± 0.2
Cover Tape Thickness
0.1 max
Max. Component Rotation or Tilt
10°
Min. Bending Radius
30
www.fairchildsemi.com
11
Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M
Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor Optocouplers
Carrier Tape Specifications
PRELIMINARY
Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M
Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor Optocouplers
Reflow Profile
245 C, 10–30 s
Temperature (°C)
300
260 C peak
250
200
150
Time above 183C, <160 sec
100
50
Ramp up = 2–10C/sec
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
Time (Minute)
• Peak reflow temperature: 260 C (package surface temperature)
• Time of temperature higher than 183 C for 160 seconds or less
• One time soldering reflow is recommended
©2008 Fairchild Semiconductor Corporation
6N13XM, HCPLXXXM Rev. 1.0.1
www.fairchildsemi.com
12
PRELIMINARY
Build it Now™
CorePLUS™
CorePOWER™
CROSSVOLT™
CTL™
Current Transfer Logic™
EcoSPARK®
EfficentMax™
EZSWITCH™ *
™
®
®
Fairchild
®
Fairchild Semiconductor
FACT Quiet Series™
®
FACT
FAST®
FastvCore™
FlashWriter® *
FPS™
F-PFS™
FRFET®
SM
Global Power Resource
Green FPS™
Green FPS™ e-Series™
GTO™
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
MillerDrive™
MotionMax™
Motion-SPM™
OPTOLOGIC®
OPTOPLANAR®
®
PowerTrench®
Programmable Active Droop™
QFET®
QS™
Quiet Series™
RapidConfigure™
™
Saving our world, 1mW/W/kW at a time™
SmartMax™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SupreMOS™
SyncFET™
PDP SPM™
Power-SPM™
The Power Franchise®
TinyBoost™
TinyBuck™
TinyLogic®
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
µSerDes™
®
UHC
Ultra FRFET™
UniFET™
VCX™
VisualMax™
®
* EZSWITCH™ and FlashWriter® are trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR
CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts.
Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications,
and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of
counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are
listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have
full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information.
Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide
any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our
customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Advance Information
Formative / In Design
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
Definition
Datasheet contains the design specifications for product development. Specifications may change in
any manner without notice.
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes
at any time without notice to improve the design.
Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The
datasheet is for reference information only.
Rev. I36
©2008 Fairchild Semiconductor Corporation
6N13XM, HCPLXXXM Rev. 1.0.1
www.fairchildsemi.com
13
Single-Channel: 6N135M, 6N136M, HCPL2503M, HCPL4502M, HCPL4503M
Dual-Channel: HCPL2530M, HCPL2531M — High Speed Transistor Optocouplers
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.