FSP FSP350-50ARN Specification describes a 350 watts power supply. Datasheet

PC PSU
FSP350-50ARN
DESCRIPTION
This specification describes a 350 watts power supply. With
5 output, and remote ON/OFF control for ATX-12V system
and a “Power factor correction (active PFC )” circuit at
200V-240Vac.
APPLICATION
Desktop
W ATTAGE
Wattage:
350W
DIMENSION
Dimension:
140mm(L) x 150mm(W) x
86mm(H)
SAFETY STANDARD APPAOVAL
Silver
<0.5W
230Vac
GENERAL SPECIFICATION
PRODUCT HIGHLIGHT
Efficiency Level:
Erp Lot:
Input Voltage:
Efficiency:
Silver
PWOK Delay Time: 500ms > PWOK > 100ms
EMC Performance: EN55022 class B
INPUT SPECIFICATION
Input Range:
Input Frequency:
220-240 Vac
47-63 Hz
ENVIRONMENTAL SPECIFICATION
+3.3V 20Ms (maximum)
+5V 20Ms (maximum
+12 V 20Ms (maximum)
-12 V 20Ms (maximum)
MTBF:
TEMP.Range:
OUTPUT SPECIFICATION
Output Rise Time:
*Output Voltage and C urrent Rating
+3.3V
Ripple-Noise(R-P) mV
50mV
Regulation Load %
±5%
Output Max.(A)
21A
Output Min.(A)
0.2A
+5V
50mV
±5%
15A
1A
+12V1
50mV
±5%
28A
0.05A
NOTES
+3.3V & +5V total output not exceed 103W.
When +5V is load to 15A, the +3.3V maximum load is 8.46A.
When +3.3V is load to 21A, the +5V maximum load is 6.74A.
This content is subject to change, please refer to specification for m ore detail.
FSP reserve the right to change the content without prior notice
Storage Temperature: -40°C to +
70℃
The power supply reliability, when
calculated by “Bellcore” latest
revision are exceed 100,000 hours
with all output at maximum load and
an ambient temperature of 25℃.
-12V
200mV
±10%
0.3A
0A
+5Vsb
50mV
±5%
2.5A
0A
Similar pages