ER3A – ER3J WTE POWER SEMICONDUCTORS Pb 3.0A SURFACE MOUNT GLASS PASSIVATED SUPERFAST DIODE Features ! Glass Passivated Die Construction ! ! ! ! ! ! Ideally Suited for Automatic Assembly B Low Forward Voltage Drop, High Efficiency Surge Overload Rating to 100A Peak Low Power Loss A Super-Fast Recovery Time F Plastic Case Material has UL Flammability Classification Rating 94V-O C H G E SMC/DO-214AB Dim Min Max 5.59 6.22 A 6.60 7.11 B 2.75 3.25 C 0.152 0.305 D 7.75 8.13 E 2.00 2.62 F 0.051 0.203 G 0.76 1.27 H All Dimensions in mm Mechanical Data ! ! ! ! ! ! Case: SMC/DO-214AB, Molded Plastic Terminals: Solder Plated, Solderable per MIL-STD-750, Method 2026 Polarity: Cathode Band or Cathode Notch Marking: Type Number Weight: 0.21 grams (approx.) Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 Maximum Ratings and Electrical Characteristics Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TA=25°C unless otherwise specified Symbol ER3A ER3B ER3C ER3D ER3E ER3G ER3J Unit VRRM VRWM VR 50 100 150 200 300 400 600 V VR(RMS) 35 70 105 140 210 280 420 V IO 3.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 100 A Forward Voltage @IF = 3.0A VFM @TA = 25°C @TA = 100°C IRM 5.0 500 µA Reverse Recovery Time (Note 1) trr 35 nS Typical Junction Capacitance (Note 2) Cj 45 pF RJL 16 °C/W Tj, TSTG -65 to +150 °C Peak Reverse Current At Rated DC Blocking Voltage @TL = 75°C D Typical Thermal Resistance (Note 3) Operating and Storage Temperature Range 0.95 1.25 1.7 V Note: 1. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC. 3. Mounted on P.C. Board with 8.0mm2 land area. ER3A – ER3J 1 of 4 © 2006 Won-Top Electronics IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FWD RECTIFIED CURRENT (A) 4 Single phase half wave Resistive or Inductive load 3 2 1 0 0 25 50 75 100 125 150 175 100 ER3A - ER3D 10 ER3E - ER3G ER3J 1.0 0.1 0.01 0.6 TL , LEAD TEMPERATURE ( ° C) Fig. 1 Forward Current Derating Curve 1.0 1.4 1.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 200 1000 8.3ms single half sine-wave 100 Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) Tj = 25°C Pulse width = 300µs 2% duty cycle 10 1 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current 100 10 1 100 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance 100 trr +0.5A 50Ω NI (Non-inductive) 10Ω NI Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) 1.0Ω NI Oscilloscope (Note 1) -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 5/10ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit ER3A – ER3J 2 of 4 © 2006 Won-Top Electronics MARKING INFORMATION RECOMMENDED FOOTPRINT 0.060 MIN (1.52 MIN) WTE ER3x Cathode WTE ER3x x 0.121 MIN (3.07 MIN) = Polarity Band = Manufacturer’s Logo = Device Number = A, B, C, D, E, G or J 0.185 MAX (4.69 MAX) inches(mm) PACKAGING INFORMATION TAPE & REEL Direction of Unreeling 8mm 330mm 16mm 1.6mm 4mm 16mm Product ID Label Reel Diameter (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 330 3,000 340 x 337 x 45 6,000 370 x 370 x 420 48,000 19.0 Note: 1. Paper reel, white or gray color. 2. Components are packed in accordance with EIA standard 481-1 and 481-2. ER3A – ER3J 3 of 4 © 2006 Won-Top Electronics ORDERING INFORMATION Product No. Package Type Shipping Quantity ER3A-T3 SMC 3000/Tape & Reel ER3B-T3 SMC 3000/Tape & Reel ER3C-T3 SMC 3000/Tape & Reel ER3D-T3 SMC 3000/Tape & Reel ER3E-T3 SMC 3000/Tape & Reel ER3G-T3 SMC 3000/Tape & Reel ER3J-T3 SMC 3000/Tape & Reel 1. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, ER3A-T3-LF. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com We power your everyday. ER3A – ER3J 4 of 4 © 2006 Won-Top Electronics