Bel OZRA1200FF1A Radial leaded ptc Datasheet

defining a degree of excellence
Radial Leaded PTC
0ZRA Series
0ZRA1007D
RoHS6 Compliant
Electrical Characteristics (23°C)
Application
High Current Applications
Product Features
Very High Hold Currents, Low DCR Resistance
Operating (Hold Current) Range
3 A ~ 14A
Maximum Voltage
16V
Temperature Range
-40°C to 85°C
Agency Approval
TUV (Std. EN60738-1-1, Cert. R50102187)
UL Component (Std. UL1434, File E305051)
UL Conditions of Acceptability:
1.These devices have been investigated for use
in safety circuits and are suitable as a limiting
device.
Product Dimensions
All dimensions
in mm
Hold current-maximum current at which the device will not trip in still air at 23°C.
IH
Trip current-minimum current at which the device will always trip in still air at 23°C.
IT
Imax Maximum fault current device can withstand without damage at rated voltage (Vmax).
Vmax Maximum voltage device can withstand without damage at its rated current.
Typical power dissipated by device when in tripped state in 23°C still air environment.
Pd
Rmin Minimum device resistance at 23°C.
Rmax Maximum device resistance at 23°C.
R1max Maximum device resistance at 23°C, 1 hour after initial device trip.
Physical specifications
Lead material
ø
0ZRA0300 ~ 0ZRA1100 - Tin plated copper, 20 AWG.
0ZRA1200 ~ 0ZRA1400 - Tin plated copper, 18 AWG.
Soldering characteristics
MIL-STD-202, Method 208E.
Insulating coating
Flame retardant epoxy, meets UL-94-V-0 requirements.
PTC Marking
“bel” or “b”, IH code and “RA”.
Standard Package
Specifications subject to change without noticeG
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel:201 - 432 - 0463 • Fax:201 - 432 - 9542 • E-Mail: [email protected]
Website:www.belfuse.com
defining a degree of excellence
Radial Leaded PTC
RoHS6 Compliant
0ZRA Series
0ZRA1007C
Typical Time - To - Trip at 23°C
(See Elec. Characteristics Table for P/N - Curve Correlation)
Time - To - Trip (S)
A B C D E F G H I J K
Fault Current (A)
Cautionary Notes
Thermal Derating Curve
Percent Of Rated Hold And
Trip Current
1. Operation beyond the specified maximum
ratings or improper use may result in damage
DQGSRVVLEOHHOHFWULFDODUFLQJDQGRUÀDPH
2. These Polymer PTC (PPTC) devices are intended for
protection against occasional overcurrent/
overtemperature fault conditions and may not be
suitable for use in applications where repeated and/
or prolonged fault conditions are anticipated.
3. Avoid contact of PTC device with chemical solvent.
Prolonged contact may adversely impact the PTC
performance.
4. These PTC devices may not be suitable for use in
circuits with a large inductance, as the PTC trip can
generate circuit voltage spikes above the PTC
rated voltage.
Ambient Temperature (°C)
Specifications subject to change without noticeG
Corporate Office
Bel Fuse Inc.
206 Van Vorst Street, Jersey City, NJ 07302
Tel: 201-432-0463
Fax: 201-432-9542
E-Mail: [email protected]
Website: www.belfuse.com
Far East Office
Bel Fuse Ltd.
8F/8 Luk Hop Street
San Po Kong
Kowloon, Hong Kong
Tel: 852-2328-5515
Fax: 852-2352-3706
European Office
Bel Stewart GmbH
Industriestrasse 20
61381 Friedrichdorf
Germany
Tel: 49.6172.9552.0
Fax: 49.6172.9552.40
Similar pages