F-1501 3 Line 6-Pin Data Line Filters F-1503 & F-1507 8 Line 16-Pin Schematic F-1504 & F-1508 6 Line 16-Pin Schematic Data Line Protection Applications Frequency Range up to 100 MHz Filter Common & Differential Mode Noise EMI / RFI Suppression High Current & Voltage Isolation F-1500 6 Line 14-Pin Schematic F-1502 4 Line 8-Pin Hi-Pot 500 VRMS Minimum F-1509 6 Line 16-Pin Schematic Tape & Reel available for SMD versions Electrical Specifications at 25OC DIP Part Number Data Lines OCL min. ( µH ) LL max. ( µH ) DCR max. ( mΩ ) CW/W max. ( pF ) (See Dwg. on Pg. 40) Coils Turns Ratio F-1500 F-1501 6 2 1:1:1 85 0.25 200 9.5 14 Pin 3 1 1:1:1 85 0.25 200 9.5 6 Pin F-1502 4 1 1:1:1:1 85 0.25 200 9.5 8 Pin F-1503 8 2 1:1:1:1 85 0.25 200 12.0 16 Pin F-1504 6 3 1:1 85 0.25 200 10.0 16 Pin 100 mil DIP & SMD 6, 8, 14 & 16 Pin (Add G or J for SMD) See pg. 40, fig. 4, 5, & 6 Package D Crosstalk ( dB ) *Crosstalk G J Impedance - 40 1000 - 50 800 Typical Z - 60 600 (Ω) - 70 400 - 80 200 Minimum 100 1 MHz Frequency 0 10 MHz 10 20 *For Dataline Filters with two coils or more 50 mil OCL min. ( µH ) LL max. ( µH ) DCR max. ( mΩ ) CW/W max. ( pF ) Data Lines Coils Turns Ratio F-1507 8 2 1:1:1:1 85 0.25 200 12.0 16-Pin F-1508 6 3 1:1 85 0.25 200 12.0 16-Pin F-1509 6 2 1:1:1 85 0.25 200 12.0 16-Pin P/N MAX. 80 100 For Complete Details including PDF Catalogs & Data Sheets on this and other product families visit www.rhombus-ind.com MAX. 50 mil Package F-1507, -1508, -1509 .205 (5.21) MAX. .016 (0.41) TYP. Specifications subject to change without notice. Rhombus Industries Inc. 50 mil Package 60 .285 (7.24) .505 (12.83) 50 mil Package F-1507, -1508, -1509 Dimensions in Inches (mm) 40 Frequency ( MHz ) .050 (1.27) .010 (0.25) .025 (0.64) .015 (0.38) TYP. TYP. .380 (9.65) .360 (9.14) TYP. TYP. For other values & Custom Designs, contact factory. 30 DATALINE - 4/99 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Tel: (714) 898-0960 • Fax: (714) 896-0971