ECA10 10W U l t r a m i n i a ture E nc aps ulat ed S w i t c hin g Po we r Su p p lie s series Universal 90-264VAC Input High Efficiency Improved EMI Performance 4242VDC Isolation Single , Dual and Triple Outputs Full Safety Approvals Model Number Output Voltage Output Amps FL Ripple/Noise max. Efficiency at nom. I/P SINGLE OUTPUT - PCB Mount ESCA-0100 3.3 VDC ESCA-0101 5 VDC ESCA-0122 9 VDC ESCA-0102 12 VDC ESCA-0103 15 VDC ESCA-0118 18 VDC ESCA-0105 24VDC 2.5A 2A 1.1A 0.85A 0.67A 0.55A 0.42A 100mV pk-pk 100mV pk-pk 100mV pk-pk 100mV pk-pk 100mV pk-pk 120mV pk-pk 160mV pk-pk 67%, typ. 72%, typ. 72%, typ. 75%, typ. 76%, typ. 77%, typ. 78%, typ. SINGLE OUTPUT - Chassis Mount ESCC-0100 3.3 VDC ESCC-0101 5 VDC ESCC-0122 9 VDC ESCC-0102 12 VDC ESCC-0103 15VDC ESCC-0118 18 VDC ESCC-0105 24VDC 2.5A 2A 1.1A 0.85A 0.67A 0.55A 0.42A 100mV pk-pk 100mV pk-pk 100mV pk-pk 100mV pk-pk 100mV pk-pk 120mV pk-pk 160mV pk-pk 67%, typ. 72%, typ. 72%, typ. 75%, typ. 76%, typ. 77%, typ. 78%, typ. SINGLE OUTPUT - DIN Rail Mount ESCC-0100/DRL 3.3 VDC 2.5A ESCC-0101/DRL 5 VDC 2A ESCC-0122/DRL 9 VDC 1.1A ESCC-0102/DRL 12 VDC 0.85A ESCC-0103/DRL 15VDC 0.67A ESCC-0118/DRL 18 VDC 0.55A ESCC-0105/DRL 24VDC 0.42A 100mV pk-pk 100mV pk-pk 100mV pk-pk 100mV pk-pk 100mV pk-pk 120mV pk-pk 160mV pk-pk 67%, typ. 72%, typ. 72%, typ. 75%, typ. 76%, typ. 77%, typ. 78%, typ. WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ECA10 10W U l t r a m i n i a ture E nc aps ulat ed S w i t c hin g Po we r Su p p lie s series Universal 90-264VAC Input High Efficiency Improved EMI Performance 4242VDC Isolation Single ,Dual and Triple Outputs Full Safety Approvals Model Number Output Voltage Output Amps FL Ripple/Noise Efficiency at nom. I/P DUAL OUTPUT - PCB Mount EDCA-0106 ±12 VDC EDCA-0107 ±15 VDC EDCA-0108 5/12 VDC ±0.42A ±0.34A 1/0.42A ±100 mV pk-pk ±100 mV pk-pk ±100 mV pk-pk 75%, typ. 75%, typ. 74%, typ. DUAL OUTPUT - Chassis Mount EDCC-0106 ±12 VDC EDCC-0107 ±15 VDC EDCC-0108 5/12 VDC ±0.42A ±0.34A 1/0.42A ±100 mV pk-pk ±100 mV pk-pk ±100 mV pk-pk 75%, typ. 75%, typ. 74%, typ. DUAL OUTPUT - DIN Rail Mount EDCC-0106/DRL ±12 VDC EDCC-0107/DRL ±15 VDC EDCC-0108/DRL 5/12 VDC ±0.42A ±0.34A 1/0.42A ±100 mV pk-pk ±100 mV pk-pk ±100 mV pk-pk 75%, typ. 75%, typ. 74%, typ. TRIPLE OUTPUT - PCB Mount ETCA-0109 5 ±12 VDC ETCA-0111 5 ±15 VDC 1.5 ±0.1 A / 1.8 ±0.13 A 1.4 ±0.1 A / 1.8 ±0.13 A 50 ±75 mV pk-pk 50 ±75 mV pk-pk 71%, typ. 71%, typ. TRIPLE OUTPUT - Chassis Mount ETCC-0109 5 ±12 VDC ETCC-0111 5 ±15 VDC 1.5 ±0.1 A / 1.8 ±0.13 A 1.4 ±0.1 A / 1.8 ±0.13 A 50 ±75 mV pk-pk 50 ±75 mV pk-pk 71%, typ. 71%, typ. TRIPLE OUTPUT - DIN Rail Mount ETCC-0109/DRL 5 ±12 VDC ETCC-0111/DRL 5 ±15 VDC 1.5 ±0.1 A / 1.8 ±0.13 A 1.4 ±0.1 A / 1.8 ±0.13 A 50 ±75 mV pk-pk 50 ±75 mV pk-pk 71%, typ. 71%, typ. WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ECA10 10W U l t r a m i n i a ture E nc aps ulat ed S w i t c hin g Po we r Su p p lie s PHYSICAL SPECIFICATIONS INPUT SPECIFICATIONS Input Voltage Range Frequency Range Inrush Current, typ: Leakage Current 90-264 VAC (100-240VAC nom.) 47-63 Hz 20A@115V, 40A@230V Input * <3.5mA @ 264VAC, 50Hz OUTPUT SPECIFICATIONS Voltage and Current Load Regulation (Note7) Line Regulation (Note 8) Cross Regulation (Note 11) Preset Accuracy (Note 9) Temperature Coefficient Ripple/Noise at nom. I/P Over Voltage Protection Short Circuit Protection (Note 3) Hold Up Time See Selection Chart Single/Duals ± 3%, Triple: 0.5 / ± 0.5% (max) Single 0.1~1%, typ Duals ± 0.3~1%, typ Triple: 0.6 / ± 0.2% (max) Duals 2% Triple NA / ± 0.1% Single: ±1% Duals: ±1.5% Triples: ±1% / ±5% ±0.03%/°C (Note 1,2,10) See Selection Chart Clamp* Continuous self-recovering* 30 mS, typ (Nom. Input, 100% load) GENERAL SPECIFICATIONS Isolation (Note 4)* Efficiency Switching Frequency Safety UL/cUL: UL-EU: CE: CB: EMC series 4242VDC Input-Output 3535VDC I/P-Ground 1414VDC O/P-Ground See Selection Chart 100Khz, (fixed, typical) UL60950-1 2nd ed./ C22.2 60950-1 2nd ed. EN60950-1 2nd ed. EN60601-1-2 IEC60950-1 2nd ed. EN55011 Class B Size PCB Mount 2.56L” x 1.77W” x 0.85H” Chassis Mount 3.77L” x 2.16W” x 1.0H” Din Rail 3.77L” x 2.16W” x 1.35H” Case Material Rynite, 94V-0 Rated Construction Encapsulated. Soft Pot Weight PCB / CHA 4 oz (113g) / 8.5 oz (241g) Din Rail 11.5 oz (326g) ENVIRONMENTAL SPECIFICATIONS Oper. Temperature (Note 5) Storage Temperature Relative Humidity MTBF 0 to +40°C (See Derate) -25 to +71°C * 0 to + 95%, non-cond * (Mil Std 217, 25°C) 270,000 Hrs NOTES 1. All measurements should be made directly at the terminals of the power supply. 2. Ripple and Noise depend upon output voltage as specified par particular model. 3. Short Circuit Protection is self-recovering when overcurrent condition is removed. 4. Isolation for up to 1minute duration. 5. Specified for free-air convection cooling. 6. Minimum load is NOT required for proper operation. However, auxiliary outputs should be reduced as a function of primary output minimum load or load regulation will be higher. 7. Load regulation measured from 20% to FL. 8. Line regulation measured from 90VAC 264VAC. 9. Preset accuracy measured at nominal load, 120 VAC input. 10. O/P noise measured directly at pins/terminals at nom. load, 0.1uF bypass, pk-pk @20MHz bandwidth. 11. Cross Reg.: Measured output (5V for Triples) at nominal load with the other output varied between 60% to 100% load. 12. 100% Production Tested. All specifications are typical at nominal input, full load, and 25°C unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 ECA10 10W U l t r a m i n i a ture E nc aps ulat ed S w i t c hin g Po we r Su p p lie s series OUTPUT DERATING CURVE MECHANICAL DIMENSIONS .20 5 3 4 5 6 7 1 .69 17.5 1.77 45 2 .30 7.5 .49 12.5 .69 17.5 .394 10 8 9 2.56 65 PIN-OUT VIEWED FROM BOTTOM .85 21.59 .04 1 .22 5.5 NOTES : 1. All dimension in mm [ inch ] . 2. tolerance : .XX 0.508 [0.02 ]. .XXX 0.254[0.01]. DRAWING NO. REV EXCA-10W DESCRIPTION A NEW SPEC WWW.ASTRODYNETDI.COM .20 5.1 2.13 54 Model Type/Pin# Single Dual 1 2 3 4 5 6 7 8 9 ACL ACN No Pin No Pin +Vout No Pin Com -Vout No Pin ACL ACN No Pin No Pin +Vout No Pin No Pin -Vout No Pin SHEET METAL TOLERANCE UNIT (UNLESS OTHERWISE SPECIFIED) SIZE SCALE DIMENSION PIERCING BENDING ANGULAR SHEET ±0.1 ±0.15 X<8 ±0.3° 2015/07/07 Projection ±0.5° ±0.1 8<X<25 ±0.2 DATE 25<X<100 100<X<300 300<X<800 ±0.5° mm A4 1:1 Dual(0108) Triple ACL ACN No Pin No Pin +12V No Pin +5Vout Com No Pin ACL ACN +Vout Com No Pin -Vout +5Vout +5VRTN No Pin MATERIAL PART NO. EXCA-10W ASTRODYNE USA: 1-800-823-8082 TITLE outline drawing DRAWN ASTRODYNE E.LIU PACIFIC: 886-2-26983458 ±0.15 ±0.2 ±0.25 ±0.3 ±1° CHECKED ±0.3 ±0.5 ±1.5° APPROVED OF MODEL NO. ECA10 10W U l t r a m i n i a ture E nc aps ulat ed S w i t c hin g Po we r Su p p lie s series MECHANICAL DIMENSIONS - CHASSIS MOUNT 4 1 5 6 2 7 8 3 9 MECHANICAL DIMENSIONS - DIN RAIL Model Type / Pin# Single Dual Dual (0108) Triple 1 2 3 4 5 6 7 8 9 ACN N/C ACL N/C -Vout Com Com +Vout N/C ACN N/C ACL N/C Com Com +5V +12V N/C ACN N/C ACL N/C -Vout -Vout +Vout +Vout N/C ACN N/C ACL N/C +5VRTN +5Vout -Vout Com +Vout DIN Rail mounting kit available for Chassis-mount modules, specify part # M-DRL-01. Kit includes mounting plate, DIN Rail cliip and assembly hardware. WWW.ASTRODYNETDI.COM 2915 ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458