MPQ2019 40V, 300mA, Low-Quiescent Current Adjustable Output Linear Regulator AEC-Q100 Qualified DESCRIPTION FEATURES The MPQ2019 is a low-power linear regulator that supplies power to systems with highvoltage batteries. It includes a wide 3V to 40V input range, low-dropout voltage and lowquiescent supply current. The low-quiescent current and low-dropout voltage allow operations at extremely low-power levels. Therefore, the MPQ2019 is ideal for low-power microcontrollers and battery-powered equipment. The MPQ2019 provides a wide variety of fixed output-voltage options (if requested): 1.8V, 1.9V, 2.3V, 2.5V, 3.0V, 3.3V, 3.45V, and 5.0V; Also it provides the output-adjustable option (from 1.25V to 15V). The regulator output current is limited internally, and the device is protected against short-circuit, over-load, and over-temperature conditions. The MPQ2019 includes thermal shutdown (TSD), current-limiting fault protection, and is available in a SOIC-8 EP package. 3V to 40V Input Range 10µA Quiescent Supply Current Stable with Low-value Output Ceramic Capacitor (> 0.47μF) 300mA Specified Current Fixed 5V, 3.3V, and Adjustable Output (1.2 V to 15 V) Versions Output ±2% Accuracy Over Temperature Specified Current Limit Power Good Programmable Power Good Delay Thermal Shutdown and Short-Circuit Protection -40°C to +150°C Specified Junction Temperature Range Available in a SOIC-8 EP Packages Available in AEC-Q100 Grade 1 APPLICATIONS Industrial/Automotive Applications Portable/Battery-Powered Equipment Ultra Low-Power Microcontrollers Cellular Handsets Medical Imaging All MPS parts are lead-free, halogen free, and adhere to the RoHS directive. For MPS green status, please visit MPS website under Quality Assurance. “MPS” and “The Future of Analog IC Technology” are Registered Trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION IN IN EN OUT MPQ2019GN PG FB PGDL EN OUT MPQ2019GN PG FB PGDL GND Output Adjustable Version Vout Vout GND Output Fixed Version MPQ2019 Rev. 1.11 www.MonolithicPower.com 1/10/2018 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 1 MPQ2019 - 40V, 300mA, LOW QUIESCENT-CURRENT LINEAR REGULATOR ORDERING INFORMATION Part Number* Package MPQ2019GN SOIC8-EP MPQ2019GN-33 SOIC8-EP MPQ2019GN-5 SOIC8-EP MPQ2019GN-AEC1 SOIC8-EP MPQ2019GN-33-AEC1 SOIC8-EP MPQ2019GN-5-AEC1 SOIC8-EP Top Marking See Below * For Tape & Reel, add suffix –Z (e.g. MPQ2019GN–Z) TOP MARKING MP2019: part code of MPQ2019GN; LLLLLLLL: lot number; MPS: MPS prefix: Y: year code; WW: week code: TOP MARKING MP2019-33: part code of MPQ2019GN-33 LLLLLLLL: lot number; MPS: MPS prefix: Y: year code; WW: week code: TOP MARKING MP2019-5: part code of MPQ2019GN-5 LLLLLLLL: lot number; MPS: MPS prefix: Y: year code; WW: week code: MPQ2019 Rev. 1.11 www.MonolithicPower.com 1/10/2018 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 2 MPQ2019 - 40V, 300mA, LOW QUIESCENT-CURRENT LINEAR REGULATOR PACKAGE REFERENCE FB OUT N/C PGDL GND PG VIN EN SOIC-8 EP ABSOLUTE MAXIMUM RATINGS (1) Thermal Resistance IN, EN .......................................... -0.3V to +42V OUT ............................................. -0.3V to +17V PG .............................................. -0.3V to +15V PGDL, FB ...................................... -0.3V to +6V Junction Temperature ............................ +150C Lead Temperature ................................. +260C Storage Temperature ............... -65C to +150C (2) Continuous Power Dissipation (TA = +25°C) SOIC-8 EP .................................................2.5W SOIC-8 EP.............................. 50 ...... 10 ... C/W Notes: 1) 2) ESD SUSCEPTIBILITY (3) HBM (Human Body Mode) ...........................4kV MM (Machine Mode)...................................200V Recommended Operating Conditions (4) 3) 4) 5) (5) θJA θJC Exceeding these ratings may damage the device. The maximum allowable power dissipation is a function of the maximum junction temperature TJ (MAX), the junction-to-ambient thermal resistance θJA, and the ambient temperature TA. The maximum allowable continuous power dissipation at any ambient temperature is calculated by PD (MAX) = (TJ (MAX)TA)/θJA. Exceeding the maximum allowable power dissipation produces an excessive die temperature, causing the regulator to go into thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent damage. Devices are ESD sensitive. Handle with precaution. The device is not guaranteed to function outside of its operating conditions. Measured on JESD51-7, 4-layer PCB. Supply Voltage VIN ............................. 3V to 40V Output Voltage VOUT ..................... 1.25V to 15V Operating Temperature ..... TA=-40°C to +125°C TA≤TJ≤ +150°C MPQ2019 Rev. 1.11 www.MonolithicPower.com 1/10/2018 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 3 MPQ2019 - 40V, 300mA, LOW QUIESCENT CURRENT LINEAR REGULATOR ELECTRICAL CHARACTERISTICS VIN = VEN = 13.5V, TA = -40°C to +125°C, TA≤ TJ ≤ +150°C, unless otherwise noted. Typical values are at TA=+25°C. Parameter Symbol Condition Input Voltage Output-Voltage Range Typ Max Units VIN 3 40 V VOUT 1.25 V µA MPQ2019GN GND Current Min IGND MPQ2019GN-33 MPQ2019GN-5 0<ILOAD<1mA 10 15 15 1mA<ILOAD<30mA 30mA<ILOAD<300mA 0<ILOAD<1mA 1mA<ILOAD<30mA 30mA<ILOAD<300mA 0<ILOAD<1mA 1mA<ILOAD<30mA 15 65 12 16 65 12 16 21 95 16 22 95 16 22 30mA<ILOAD<300mA 65 µA mA V Shutdown Supply Current Load-Current Limit IS ILIMIT VEN =0V VIN=7V, VOUT = 0V, TA = +25°C FB Voltage VFB MPQ2019GN, FB = OUT, ILOAD=5mA MPQ2019GN-33, ILOAD=5mA 600 1000 95 1 1350 1.225 1.25 1.275 3.2 3.3 3.4 Output Voltage Accuracy MPQ2019GN Dropout Voltage VDROPOUT MPQ2019GN-33 MPQ2019GN-5 FB Input Current Line Regulation µA V MPQ2019GN-5, ILOAD=5mA (6) µA IFB 4.85 5 5.15 VOUT=5V, ILOAD = 150mA 200 400 TA = +25°C, VOUT=5V, ILOAD = 300mA 420 550 VOUT=3.3V, ILOAD = 150mA 230 430 TA = +25°C, VOUT=3.3V, ILOAD = 300mA 480 640 VOUT=5V, ILOAD = 150mA 230 430 TA = +25°C, VOUT=5V, ILOAD = 300mA 480 640 mV MPQ2019GN VFB = 1.3V 50 MPQ2019GN VIN = 3V to 40V, ILOAD = 5mA, VOUT = VFB -10 1 10 MPQ2019GN-33 VIN = 5V to 40V, ILOAD = 5mA, VOUT = 3.3V -10 1 10 MPQ2019GN-5 VIN = 6V to 40V, ILOAD = 5mA, VOUT = 5V -10 1 10 MPQ2019 Rev. 1.11 www.MonolithicPower.com 1/10/2018 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. nA mV 4 MPQ2019 - 40V, 300mA, LOW QUIESCENT CURRENT LINEAR REGULATOR ELECTRICAL CHARACTERISTICS (continued) VIN = VEN = 13.5V, TA = -40°C to +125°C, TA≤ TJ ≤ +150°C, unless otherwise noted. Typical values are at TA=+25°C. Parameter Symbol Condition Load Regulation Output Voltage PSRR (7) MPQ2019GN Start-Up Response Time MPQ2019GN-33 MPQ2019GN-5 EN Threshold Voltage VIL VIH PG Rising Threshold MPQ2019GN MPQ2019GN-33 MPQ2019GN-5 Thermal (7) Hysteresis Shutdown 1 15 1 15 1 15 57 45 51 RLOAD=500Ω, VOUT = 5V, COUT=22µF, VOUT from 10% to 90% RLOAD=500Ω,VOUT=3.3V, COUT=22µF, VOUT from 10% to 90% RLOAD=500Ω,VOUT=5V, COUT=22µF, VOUT from 10% to 90% 89% 88% 88% Sink 1mA Current VPG=5V VPGDL=1V 0.9 1.5 0.5 1 0.9 1.5 0.1 0.5 93% 92% 92% 97% 96% 96% CPGDL=47nF CPGDL=47nF 0.1 mV dB 5% PGDL Falling Threshold PG Delay Time PG Reaction Time (7) Max Units 1.8 EN = 0V or 15V PG Rising Threshold Hysteresis PG Low Voltage PG Leakage Current PGDL Charging Current PGDL Rising Threshold Typ 0.3 EN Input Current Thermal Shutdown Min ILOAD = 5mA to 300mA, MPQ2019GN VOUT = 5V,TA = +25°C I = 5mA to 300mA, MPQ2019GN-33 LOAD VOUT = 3.3V,TA = +25°C ILOAD = 5mA to 300mA, MPQ2019GN-5 VOUT = 5V,TA = +25°C 100Hz, COUT = 10μF, ILOAD=10mA 1kHz, COUT = 10μF, ILOAD=10mA 100kHz, COUT = 10μF, ILOAD=10mA ms V V μA VFB VFB 3 1.4 5.5 1.7 0.4 1 9 2 0.2 5 0.4 10 0.5 0.7 15 2 V µA µA V V ms µs TSD 165 C ΔTSD 30 C Notes: 6) Dropout Voltage: Measured when the output voltage VOUT has dropped 100mV from the nominal value obtained at VIN=13.5V. 7) Derived from bench characterization. Not tested in production. MPQ2019 Rev. 1.11 www.MonolithicPower.com 1/10/2018 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 5 MPQ2019 - 40V, 300mA, LOW QUIESCENT CURRENT LINEAR REGULATOR PIN FUNCTIONS Pin # Name 1 OUT 2 3 4 NC GND IN 5 EN 6 7 PG PGDL 8 FB Description Regulated Output Voltage. Only a low-value ceramic capacitor (≥ 0.47μF) on the output is required for stability. No Connection. Ground. Connect the exposed pad and GND to the same ground plane. Input Voltage. Connect a 3V to 40V supply to IN. Regulator On/Off Control Input. Logic low shuts down the IC; logic high starts up the IC. Connect EN to IN for automatic start-up. Power Good. If not used, pin can be left floating. Programmable Power-Good Delay Time. If not used, pin can be left floating. Feedback Input for Output Adjustable Version. FB is regulated to 1.25V nominally. This terminal is used to set the output voltage. MPQ2019 Rev. 1.11 www.MonolithicPower.com 1/10/2018 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 6 MPQ2019 - 40V, 300mA, LOW QUIESCENT CURRENT LINEAR REGULATOR TYPICAL PERFORMANCE CHARACTERISTICS MPQ2019 Rev. 1.11 www.MonolithicPower.com 1/10/2018 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 7 MPQ2019 - 40V, 300mA, LOW QUIESCENT CURRENT LINEAR REGULATOR TYPICAL PERFORMANCE CHARACTERISTICS CIN = 1µF, COUT = 22µF, VOUT = 5V, TA = 25°C, unless otherwise noted. MPQ2019 Rev. 1.11 www.MonolithicPower.com 1/10/2018 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 8 MPQ2019 - 40V, 300mA, LOW QUIESCENT CURRENT LINEAR REGULATOR TYPICAL PERFORMANCE CHARACTERISTICS (continued) CIN = 1µF, COUT = 22µF, VOUT = 5V, TA = 25°C, unless otherwise noted. MPQ2019 Rev. 1.11 www.MonolithicPower.com 1/10/2018 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 9 MPQ2019 - 40V, 300mA, LOW QUIESCENT CURRENT LINEAR REGULATOR TYPICAL PERFORMANCE CHARACTERISTICS (continued) CIN = 1µF, COUT = 22µF, VOUT = 5V, TA = 25°C, unless otherwise noted. MPQ2019 Rev. 1.11 www.MonolithicPower.com 1/10/2018 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 10 MPQ2019 - 40V, 300mA, LOW QUIESCENT CURRENT LINEAR REGULATOR that shuts down the IC. The IC will re-start when the temperature has cooled sufficiently. OPERATION The MPQ2019 is a linear regulator that supplies power to systems with high-voltage batteries. It includes a wide 3V to 40V input range, lowdropout voltage, and a low-quiescent supply current (see Figure 1). The MPQ2019 provides a wide variety of fixed output-voltage options: 1.8V, 1.9V, 2.3V, 2.5V, 3.0V, 3.3V, 3.45V, and 5.0V; Also, it provides the output-adjustable option (from 1.25V to 15V). The output-adjustable version has an output that is adjustable from 1.25V to 15V with a simple resistor divider. It uses external feedback, allowing the user to set the output voltage with an external resistor divider. The FB threshold is 1.25V, typically. The IC enters shutdown mode when EN is low. In shutdown mode, the pass transistor, control circuitry, reference, and all biases turn off; this reduces the supply current to <1µA. Connect EN to IN for automatic start-up. The regulator output current is limited internally, and the device is protected against short-circuit, over-load, and over-temperature conditions (see Figure 2). The peak-output current is limited to around 1000mA, which exceeds the 300mA recommended continuous-output current. When the junction temperature is too high, the thermal sensor sends a signal to the control logic The maximum power-output current is a function of the package’s maximum power dissipation for a given temperature. The maximum power dissipation is dependent on the thermal resistance of the case and the circuit board, the temperature difference between the die junction and the ambient air, and the rate of air flow. GND and the exposed pad must be connected to the ground plane for proper dissipation. MPQ2019 has one power good (PG) pin. The PG pin is the open drain of an internal MOSFET. It should be connected to VOUT or external voltage source(<15V) through a resistor (i.e. 100kohm). After the VFB reaches 93% of nominal value, the MOSFET turns off and PG pin is pulled to high by VOUT or external voltage source. When the VFB drops to 88% of nominal value, the PG voltage is pulled to GND. There is a delay time when PG asserts high. The delay time can be programmed by adding a capacitor on PGDL. To select a capacitor for PGDL, use below equation: CPGDL (nF) tPGDL (ms) IPGDL ( A) Vth_PGDL (V) Where tPGDL is the desired delay time for PG asserts high, IPGDL is the PGDL charging current and Vth_PGDL is 1.7V. Figure 2 shows the power good timing. VIN UVLO Vreference EA VOUT EN For Fixed Output Version Only FB PG PG PGDL GND Figure 1. Functional Block Diagram MPQ2019 Rev. 1.11 www.MonolithicPower.com 1/10/2018 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 11 MPQ2019 - 40V, 300mA, LOW QUIESCENT CURRENT LINEAR REGULATOR IIN 4 VIN CIN 1uF 5 IN OUT MPQ2019GN EN IOUT 1 Vo R1 FB 8 COUT 22uF RPG 100K R2 IPGDL 7 VPGDL CPGDL 47nF IPG PG PGDL GND VPG 6 3 IGND VIN t < tPGR VOUT VPG-High t d∆V/d∆t =IPGDL/CPGDL VPGDL VPGDL-High VPGDL-Low t VPG tPGD tPGR t Power-On Reset Thermal Shutdown Voltage Dip at Input Undervoltage Secondary Overload at Spike Output Figure 2. Power Good Timing MPQ2019 Rev. 1.11 www.MonolithicPower.com 1/10/2018 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 12 MPQ2019 - 40V, 300mA, LOW QUIESCENT-CURRENT LINEAR REGULATOR APPLICATION INFORMATION COMPONENT SELECTION Setting the Output Voltage Set the output voltage of the MPQ2019 by using a resistor divider (see Figure 3). OUT MPQ2019 GND R1 FB R2 Choose R2=1MΩ to maintain a 1.215µA minimum load. Calculate the value for R1 using the following equation: V R1 R2 OUT 1 1.25V For a fixed-output version, VOUT can also be adjusted by adding an external resistor divider. When choosing an external divider, just note to take the internal FB resistor divider into consideration. OUT VOUT R1_IN R2_IN GND R1 FB R2 Figure 4. FB Divider for Fixed-Output Version When R2 is selected, R1 can be calculated by below equation: R1 R1_ IN 1.25 R1_ IN R2 R2 _ IN 1 VOUT 1.25 R2 R2 _ IN The internal FB resistor dividers for different fixed- output versions are shown in below Table. Table 1. Internal FB Resistor Divider Fixed-Output Voltage 3.3V 5V R1_IN 1.64MΩ 3MΩ Table 2. 3.3V Fixed Output Version External FB Divider VOUT(V) 11 8.5 8 6.5 5 VOUT Figure 3. FB Resistor Divider to Set VOUT MPQ2019 Table 2 is an example of external FB divider to get various output voltages on fixed 3.3V output version. R2_IN 1MΩ 1MΩ R1 (k) 80.6 59 54.9 43 30.1 R2 (k) 10 10 10 10 10 Enable Control (EA) EN is a digital control pin that turns the regulator on and off. When EN is pulled below 0.3V, the chip shuts down. When EN is pulled above 1.8V, the chip starts up. If this function is not used, EN can be connected to Vin directly. Input Capacitor For efficient operation, place a ceramic capacitor (C1) between 1µF and 10µF of dielectric type (X5R or X7R) between the input pin and ground. Larger values in this range improve line transient response. Output Capacitor For stable operation, use a ceramic capacitor (C2) of type X5R or X7R between 1µF and 22µF. Larger values in this range improve load transient response and reduce noise. Output capacitors of other dielectric types may be used, but they are not recommended as their capacitance can deviate greatly from their rated value over temperature. To improve load transient response, add a small ceramic (X5R, X7R, or Y5V dielectric) 2.2nF feed-forward capacitor in parallel with R1. The feed-forward capacitor is not required for stable operation. Output Noise The MPQ2019 exhibits noise on the output during normal operation. This noise is negligible for most applications. However, in applications that include analog-to-digital converters (ADCs) of more than 12 bits, consider the ADC’s power supply rejection specifications. The feed-forward capacitor C2 across R1 reduces significantly the output noise. MPQ2019 Rev. 1.11 www.MonolithicPower.com 1/10/2018 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 13 MPQ2019 - 40V, 300mA, LOW QUIESCENT-CURRENT LINEAR REGULATOR External Reverse Voltage Protection In some situations, e.g. a backup battery is connected as MPQ2019 load, the output voltage may be held up while the input is either pulled to ground, pulled to some intermediate voltage or is floating. Thus, the output voltage is higher than input voltage. Since the MPQ2019 PMOS pass element has a body diode, a current will conduct from the output to input and is not internally limited. It’s possible that the IC will be damaged by this unlimited reverse current. To avoid this, it’s recommended to place an external diode at input like below. VIN D1 VOUT OUT IN MPQ2019 Top Layer GND PCB Layout Guidelines Efficient PCB layout is critical to achieve good regulation, ripple rejection, transient response, and thermal performance. It is recommended highly to duplicate the EVB layout for optimum performance. If changes are necessary, refer to Figure 5 and follow the guidelines below: 1) Place input and output bypass ceramic capacitors close to IN and OUT, respectively. 2) Ensure all feedback connections are short and direct. Place the feedback resistors and compensation components as close to the chip as possible. 3) Connect IN, OUT, and especially, GND, respectively, to a large copper area to cool the chip. This improves thermal performance and long-term reliability. VIN IN OUT MPQ2019 EN PGDL GND C2 PG DESIGN EXAMPLE Figure 6 is a design example following the application guidelines for VOUT=3.3V with a feedforward cap: VIN VOUT IN R2 R3 OUT MPQ2019 R1 C2 2.2nF FB C1 C4 VOUT Bottom Layer Figure 5. Recommended PCB Layout C3 C1 1uF C4 47nF EN FB PGDL GND PG R1 1.64MΩ R2 1MΩ R3 3.3V C3 22uF 100KΩ Figure 6. Design Example MPQ2019 Rev. 1.11 www.MonolithicPower.com 1/10/2018 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 14 MPQ2019 - 40V, 300mA, LOW QUIESCENT-CURRENT LINEAR REGULATOR TYPICAL APPLICATION CIRCUITS VIN IN VOUT OUT R1 1.64MΩ MPQ2019 EN C1 1uF C3 47nF PGDL GND R2 1MΩ FB R3 PG 3.3V C2 22uF 100KΩ Figure 7. 3.3V Output Typical Application Circuit VIN VOUT IN OUT MPQ2019 C2 2.2nF EN C1 1uF C4 47nF PGDL GND FB PG R1 1.64MΩ R2 1MΩ R3 3.3V C3 22uF 100KΩ Figure 8. 3.3V Output with Feed-Forward Capacitor MPQ2019 Rev. 1.11 www.MonolithicPower.com 1/10/2018 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 15 MPQ2019 - 40V, 300mA, LOW QUIESCENT-CURRENT LINEAR REGULATOR PACKAGE INFORMATION SOIC-8 EP 0.189(4.80) 0.197(5.00) 8 0.124(3.15) 0.136(3.45) 5 0.150(3.80) 0.157(4.00) PIN 1 ID 1 0.228(5.80) 0.244(6.20) 0.089(2.26) 0.101(2.56) 4 TOP VIEW BOTTOM VIEW SEE DETAIL "A" 0.013(0.33) 0.020(0.51) 0.051(1.30) 0.067(1.70) SEATING PLANE 0.000(0.00) 0.006(0.15) 0.0075(0.19) 0.0098(0.25) SIDE VIEW 0.050(1.27) BSC FRONT VIEW 0.010(0.25) x 45o 0.020(0.50) GAUGE PLANE 0.010(0.25) BSC 0.050(1.27) 0.024(0.61) 0o-8o 0.016(0.41) 0.050(1.27) 0.063(1.60) DETAIL "A" 0.103(2.62) 0.138(3.51) RECOMMENDED LAND PATTERN 0.213(5.40) NOTE: 1) CONTROL DIMENSION IS IN INCHES. DIMENSION IN BRACKET IS IN MILLIMETERS. 2) PACKAGE LENGTH DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. 3) PACKAGE WIDTH DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSIONS. 4) LEAD COPLANARITY (BOTTOM OF LEADS AFTER FORMING) SHALL BE 0.004" INCHES MAX. 5) DRAWING CONFORMS TO JEDEC MS-012, VARIATION BA. 6) DRAWING IS NOT TO SCALE. NOTICE: The information in this document is subject to change without notice. Users should warrant and guarantee that third party Intellectual Property rights are not infringed upon when integrating MPS products into any application. MPS will not assume any legal responsibility for any said applications. MPQ2019 Rev. 1.11 www.MonolithicPower.com 1/10/2018 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2018 MPS. All Rights Reserved. 16