C A L IB E R (LSW-1008 Series) Wound Chip Inductor E L E C T R O N IC S IN C . specifications subject to change * revision 3-2003 Dimensions 2.92 max 2.54 0.51 Overall 2.79 max 2.10 max Suggested Pad Layout 1.27 Terminal Wraparound Approx. 0.38 mm Both Ends 2.03 Terminal (Not to scale) 1.52 1.02 Dimensions in mm 0.51 Part Numbering Guide LSW - 1008 - 10N M - T Dimensions Packaging Style (Length, Width) B=Bulk T=Tape & Reel (2000 pcs / reel) Inductance Code Tolerance F=1%, G=2%, J=5%, K=10%, M=20% Features Inductance Range 4.7 nH to 4700 nH Tolerance 1%, 2%, 5%, 10%, 20% Construction Ceramic body with wire wound construction Electrical Specifications L Code L (nH) L Test Freq (MHz Q Min Q Test Freq (MHz) SRF Min (MHz) RDC Max (Ohms) IDC Max (mA) 4N7 10N 12N 15N 18N 22N 27N 33N 39N 47N 56N 68N 82N R10 R12 R15 R18 R22 R27 R33 R39 R47 R56 R62 R68 R75 R82 R91 1R0 1R2 1R5 1R8 2R2 2R7 3R3 3R9 4R7 4.7 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 620 680 750 820 910 1000 1200 1500 1800 2200 2700 3300 3900 4700 50 50 50 50 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 50 50 50 50 50 55 55 60 60 65 65 65 60 60 60 45 45 45 45 45 45 45 45 45 45 45 45 35 35 35 28 28 28 22 22 20 20 500 500 500 500 350 350 350 350 350 350 350 350 350 350 350 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 4100 4100 3300 2500 2500 2400 1600 1600 1500 1500 1300 1300 1000 1000 950 850 750 700 600 570 500 450 415 375 375 360 350 320 290 250 200 160 160 140 110 100 90 0.08 0.08 0.09 0.10 0.11 0.12 0.13 0.14 0.15 0.16 0.18 0.20 0.22 0.56 0.63 0.70 0.77 0.84 0.91 1.05 1.12 1.19 1.33 1.40 1.47 1.54 1.61 1.68 1.75 2.00 2.30 2.60 2.80 3.20 3.40 3.60 4.00 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 650 650 580 620 500 500 450 470 470 400 300 400 360 400 380 370 310 330 300 280 290 290 260 260 Specifications subject to change without notice. TEL 949-366-8700 FAX 949-366-8707 WEB www.caliberelectronics.com Rev. 03/01