FAB0509012 RY INA M I L E R P FEATURES 103 x 200 x 63,5 mm INPUT : 90-265Vac / 600Hz OUTPUT : 28V / 150W Efficiency : 80 % typ. Chassis mounting, cold plate cooling APPLICATIONS Naval, industrial. INPUT Voltage range : 90-265Vac or 130-210Vdc 400-800Hz PFC EN61000-3-2 Input protection : fuse 4A transient and surges protected inrush current limitation reverse polarity protection in DC operation OUTPUT Voltage : Output power : 28Vdc 150W OUTPUT Typ. Max. Line regulation 0,1 % 0,2 % Load regulation 0,5 % 1% No load to full load Ripple and noise 1% 2% Peak to peak, nom. Input ; full load Current limit Short circuit current Rev. 00 115 % of I nominal 115 % of I out nominal Conditions Low line to high line ; full load Vout = 95% of nominal ; Automatic restart 115 % of I out nominal 1/3 FAB0509012 SIGNALS Power Good : Output OK by relay contact and by led. Input OK : by led ENVIRONMENTAL Storage temperature : -40°C to +100°C Operating temperature : -20°C to +95°C baseplate Humidity : PCB coating ISOLATION Input to chassis : 1500 Vrms Input to Output : 3000 Vrms Output to chassis : 500Vrms GENERAL Safety : Rev. 00 built to meet EN60950 2/3 FAB00509012 MECHANICALS INPUT : SubD 9pts male PIN 1 2, 3, 4, 6, 8, 9 5 7 OUTPUT : SubD 9pts female PIN 1, 2 3, 6, 9 4, 5 7 8 Rev. 00 OUTPUT OUT+ NC OUTPower Good common Power Good normally open 3/3 INPUT AC/N or -IN NC AC/L or +IN Ground