ATMEL AT90SC9618RT Secure microcontroller for smart card Datasheet

Features
General
• High-performance, Low-power secureAVR Enhanced RISC Architecture
•
•
•
•
•
•
– 135 Powerful Instructions (Most Executed in a Single Clock Cycle)
Low Power Idle and Power-down Modes
Bond Pad Locations Conforming to ISO 7816-2
ESD Protection to ± 6000V
Operating Ranges: 2.7 to 5.5V
Compliant with GSM, 3GPP and EMV 2000 Specifications; PC Industry Compatible
Available in Wafers, Modules, and Industry-standard Packages
Memory
• 96K Bytes of ROM Program Memory
• 18K Bytes of EEPROM, Including 128 OTP Bytes and 384-byte Bit-addressable Area
– 1 to 64-byte Program / Erase
– 1.25 ms Program / 1.25 ms Erase
– Typically More than 500,000 Write/Erase Cycles at a Temperature of 25oC
– 10 Years Data Retention
• 4K Bytes of RAM
Peripherals
• One ISO 7816 Controller
•
•
•
•
•
•
•
•
Secure
Microcontroller
for Smart Cards
AT90SC
9618RT
Summary
– Up to 625 kbps at 5 MHz
– Compliant with T=0 and T=1 Protocols
One I/O Port
Programmable Internal Oscillator (Up to 20 MHz for Internal CPU Clock)
Two 16-bit Timers
Random Number Generator (RNG)
2-level, 7-vector Interrupt Controller
Hardware DES and Triple DES DPA Resistant
Checksum Accelerator
CRC 16 & 32 Engine (Compliant with ISO/IEC 3309)
Security
•
•
•
•
•
•
•
•
Dedicated Hardware for Protection Against SPA/DPA Attacks
Advanced Protection Against Physical Attack, Including Active Shield
Environmental Protection Systems
Voltage Monitor
Frequency Monitor
Temperature Monitor
Light Protection
Secure Memory Management/Access Protection (Supervisor Mode)
Development Tools
• Voyager Emulation Platform (ATV4) to Support Software Development
• IAR Embedded Workbench® V3.20 Debugger or Atmel’s AVR Studio® Version 4.07 or
Above
• Software Libraries and Application Notes
6516AS–SMIC–28Jun05
Note: This is a summary document. A complete document will be
available under NDA. For more information, please contact your
local Atmel sales office.
Description
The AT90SC9618RT is a low-power, high-performance, 8/16-bit microcontroller with ROM program memory, EEPROM
data memory and is based on the secureAVR enhanced RISC architecture. By executing powerful instructions in a single
clock cycle, the AT90SC9618RT achieves throughputs close to 1 MIPS per MHz. Its Harvard architecture includes 32 general purpose working registers directly connected to the ALU, allowing two independent registers to be accessed in one
single instruction executed in one clock cycle.
The AT90SC9618RT uses the secureAVR that allows the linear addressing of up to 8M bytes of code and up to 16M bytes
of data as well as a number of new functional and security features.
The AT90SC9618RT includes 18K bytes of Atmel’s high density, non volatile memory.
Additional security features include power and frequency protection logic, logical scrambling on program data and
addresses, Power Analysis countermeasures and memory accesses controlled by a supervisor mode.
Figure 1 shows the AT90SC9618RT secureAVR Enhanced RISC Architecture.
Data Bus
8-bit
OTP
Access
Control
EEPROM
User Memory
PC
RNG
General
Purpose
Registers
Program
Memory
16
X
Access
Control
Y
Z
8
Instruction
Register
RAM
Data Memory
Interrupt
Unit
ALU
8
Instruction
Decoder
Control
Lines
GND
VCC
8
16
16
CLK
Secure
Control
ISO 7816
Controller
ISO 7816
I/O Port 0
Status
Register
IN/OUT0
Timer
Reset
Circuit
RST
DES
DPA Counter
measures
CRC and
Checksum
Accelerator
2
AT90SC9618RT
6516AS–SMIC–28Jun05
Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 487-2600
Regional Headquarters
Europe
Atmel Sarl
Route des Arsenaux 41
Case Postale 80
CH-1705 Fribourg
Switzerland
Tel: (41) 26-426-5555
Fax: (41) 26-426-5500
Asia
Room 1219
Chinachem Golden Plaza
77 Mody Road Tsimshatsui
East Kowloon
Hong Kong
Tel: (852) 2721-9778
Fax: (852) 2722-1369
Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: (81) 3-3523-3551
Fax: (81) 3-3523-7581
Atmel Operations
Memory
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 436-4314
RF/Automotive
Theresienstrasse 2
Postfach 3535
74025 Heilbronn, Germany
Tel: (49) 71-31-67-0
Fax: (49) 71-31-67-2340
Microcontrollers
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 436-4314
La Chantrerie
BP 70602
44306 Nantes Cedex 3, France
Tel: (33) 2-40-18-18-18
Fax: (33) 2-40-18-19-60
ASIC/ASSP/Smart Cards
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906, USA
Tel: 1(719) 576-3300
Fax: 1(719) 540-1759
Biometrics/Imaging/Hi-Rel MPU/
High Speed Converters/RF Datacom
Avenue de Rochepleine
BP 123
38521 Saint-Egreve Cedex, France
Tel: (33) 4-76-58-30-00
Fax: (33) 4-76-58-34-80
Zone Industrielle
13106 Rousset Cedex, France
Tel: (33) 4-42-53-60-00
Fax: (33) 4-42-53-60-01
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906, USA
Tel: 1(719) 576-3300
Fax: 1(719) 540-1759
Scottish Enterprise Technology Park
Maxwell Building
East Kilbride G75 0QR, Scotland
Tel: (44) 1355-803-000
Fax: (44) 1355-242-743
Literature Requests
www.atmel.com/literature
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any
intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY
WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT
OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no
representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications
and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided
otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use
as components in applications intended to support or sustain life.
© Atmel Corporation 2005. All rights reserved. Atmel®, logo and combinations thereof, Everywhere You Are ® and others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.
Printed on recycled paper.
6516AS–SMIC–28Jun05
Similar pages