AZETTLER AZ2705 30 amp power relay Datasheet

AZ2705
30 AMP POWER RELAY
FEATURES
• Low cost
• 30 Amp switching
• Class B insulation system standard,
Class F available
• Flange mount
• 4 kV dielectric
• Standard (2.4 mm) and wide contact
gap (3.0 mm) available
• UL, CUR file E44211
• TÜV R50031999
GENERAL DATA
CONTACTS
Arrangement
SPST (1 Form X)
DPST (2 Form X)
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 106
1 x 105 at 30 A 120 VAC Res.
Ratings
Resistive load:
Operate Time (max)
30 ms at nominal coil voltage
Max. switched power: 840 W or 8310 VA
Max. switched current: 30 A
Max. switched voltage: 150* VDC or 400 VAC
Release Time (max)
30 ms at nominal coil voltage
(with no coil suppression)
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Dielectric Strength
4000 Vrms coil to contact
(at sea level for 1 min.) 2000 Vrms between open contacts
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 5% of nominal coil voltage (DC)
Greater than 15% of nominal coil voltage (AC)
27 A at 240 VAC, cos phi = .8, 100k cycles [1]
Ambient Temperature
Operating
Storage
[1] silver cadmium oxide,
[2] silver tin oxide (1 Form X only)
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F) - Class B
-40°C (-40°F) to 105°C (221°F) - Class F
-40°C (-40°F) to 130°C (266°F) - Class B
-40°C (-40°F) to 155°C (311°F) - Class F
Vibration
0.062" DA at 10–55 Hz
Material
Silver cadmium oxide, silver tin oxide
Shock
Resistance
< 100 milliohms initially
(24 V, 1 A voltage drop method)
Rated Load
UL, CUR
TÜV
30 A at 277 VAC res. 30k cycles [1]
1.5 HP at 120 VAC [1]
3 HP at 240 VAC [1]
TV-10 at 120 VAC [1]
30 A at 277 VAC res. 70k cycles [2]
3 HP at 240 VAC 100k cycles [2]
10 A at 120 VAC tungsten load, 10k cycles [2]
COIL
Power
At Pickup Voltage
(typical)
1.08 W (DC)
1.2 VA (AC)
Max. Continuous
Dissipation
3.8 W at 20°C (68°F) ambient
Temperature Rise
50°C (90°F) at nominal coil voltage
Temperature
Max. 130°C (266°F) - Class B
Max. 155°C (311°F) - Class F
Operating
10 g, 11 ms, 1/2 sine (no false operation)
Non-Operating 100 g, 11 ms, 1/2 sine (no damage)
Enclosure
P.B.T. polyester
Terminals
Screw mount
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Weight
120 grams
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
4. Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force.
12/13/03W
AZ2705
RELAY ORDERING DATA
COIL SPECIFICATIONS – DC COIL
Nominal Coil
VDC
3
6
12
24
48
100
110
200
ORDER NUMBER*
Must Operate
VDC
2.3
4.5
9.0
18.0
36.0
75.0
82.5
150.0
Max. Continuous
VDC
4.2
8.4
16.8
33.7
67.5
140.5
154.7
282.4
Coil Resistance
± 10%
4.7
18.8
75
300
1200
5200
6300
21000
COIL SPECIFICATIONS – AC COIL
Nominal Coil
VAC
6
12
24
48
120
220
240
Must Operate
VAC
4.8
9.6
19.2
38.4
96.0
176.0
192.0
1 Form X
2 Form X
AZ2705–1A–3D
AZ2705–1A–6D
AZ2705–1A–12D
AZ2705–1A–24D
AZ2705–1A–48D
AZ2705–1A–100D
AZ2705–1A–110D
AZ2705–1A–200D
AZ2705–2A–3D
AZ2705–2A–6D
AZ2705–2A–12D
AZ2705–2A–24D
AZ2705–2A–48D
AZ2705–2A–100D
AZ2705–2A–110D
AZ2705–2A–200D
ORDER NUMBER*
Max. Continuous
VAC
6.6
13.2
26.4
52.8
132.0
242.0
264.0
Coil Current
mA ± 10%
319
160
80
40
23
10
9.2
1 Form X
AZ2705–1A–6A
AZ2705–1A–12A
AZ2705–1A–24A
AZ2705–1A–48A
AZ2705–1A–120A
AZ2705–1A–220A
AZ2705–1A–240A
2 Form X
AZ2705–2A–6A
AZ2705–2A–12A
AZ2705–2A–24A
AZ2705–2A–48A
AZ2705–2A–120A
AZ2705–2A–220A
AZ2705–2A–240A
*For silver tin oxide add suffix “T” (UL approved for 1 Form X only). For wide contact gap add “W”. For Class F add suffix “F”.
MECHANICAL DATA
2xM3.5
1.33 Max
[33.8]
2
6
4
8
.177
[4.5]
2.02 Max
[51.3]
4xM4
1.99
[50.5]
2.36
[60]
2.69 Max
[68.3]
.118
[3.0]
Wiring Diagrams
1 Form x
4
With capacitor
AC operation coil
2 Form x
6
2
4
6
8
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
12/13/03W
Similar pages