Series AM5T-VZ 5 Watt | DC-DC Converter FEATURES: • • • • Models Single output Model AM5T-1205S-VZ AM5T-1209S-VZ AM5T-1212S-VZ AM5T-1215S-VZ AM5T-1224S-VZ AM5T-2405S-VZ AM5T-2409S-VZ AM5T-2412S-VZ AM5T-2415S-VZ AM5T-2424S-VZ AM5T-4805S-VZ AM5T-4809S-VZ AM5T-4812S-VZ AM5T-4815S-VZ AM5T-4824S-VZ AM5T-1205SH35-VZ AM5T-1209SH35-VZ AM5T-1212SH35-VZ AM5T-1215SH35-VZ AM5T-1224SH35-VZ AM5T-2405SH35-VZ AM5T-2409SH35-VZ AM5T-2412SH35-VZ AM5T-2415SH35-VZ AM5T-2424SH35-VZ AM5T-4805SH35-VZ AM5T-4809SH35-VZ AM5T-4812SH35-VZ AM5T-4815SH35-VZ AM5T-4824SH35-VZ Models Dual output Model AM5T-1205D-VZ AM5T-1209D-VZ AM5T-1212D-VZ AM5T-1215D-VZ AM5T-1224D-VZ AM5T-2405D-VZ AM5T-2409D-VZ AM5T-2412D-VZ AM5T-2415D-VZ AM5T-2424D-VZ AM5T-4805D-VZ www.aimtec.com F 051e R12.E Wide 2:1 input range 24 Pin DIP Package Metal package High efficiency up to 80% • • • • Operating temperature -40oC to + 85oC Input / Output isolation 1500 & 3500 VDC Pin compatible with multiple manufacturers Continuous short circuit protection Input Voltage (V) Output Voltage (V) Output Current max (mA) Input Voltage (V) Output Voltage (V) Output Current max (mA) 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 36-72 5 9 12 15 24 5 9 12 15 24 5 9 12 15 24 5 9 12 15 24 5 9 12 15 24 5 9 12 15 24 ±5 ±9 ±12 ±15 ±24 ±5 ±9 ±12 ±15 ±24 ±5 1000 555 416 333 208 1000 555 416 333 208 1000 555 416 333 208 1000 555 416 333 208 1000 555 416 333 208 1000 555 416 333 208 ±500 ±277 ±208 ±166 ±104 ±500 ±277 ±208 ±166 ±104 ±500 Tel: +1 514 620 2722 1 of 4 Capacitive load, max (μF) 2200 470 470 470 220 2200 470 470 470 220 2200 470 470 470 220 2200 470 470 470 220 2200 470 470 470 220 2200 470 470 470 220 Capacitive load, max (μF) ±1000 ±220 ±220 ±220 ±100 ±1000 ±220 ±220 ±220 ±100 ±1000 Efficiency (%) 74 77 78 78 75 75 76 77 78 76 77 78 80 80 77 74 77 78 78 75 75 76 77 78 76 77 78 80 80 77 Efficiency (%) 72 76 77 77 80 74 76 78 78 75 76 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM5T-VZ 5 Watt | DC-DC Converter Models Dual output (continued) Model AM5T-4809D-VZ AM5T-4812D-VZ AM5T-4815D-VZ AM5T-4824D-VZ Input Voltage (V) AM5T-1205DH35-VZ AM5T-1209DH35-VZ AM5T-1212DH35-VZ AM5T-1215DH35-VZ AM5T-1224DH35-VZ AM5T-2405DH35-VZ AM5T-2409DH35-VZ AM5T-2412DH35-VZ AM5T-2415DH35-VZ AM5T-2424DH35-VZ AM5T-4805DH35-VZ AM5T-4809DH35-VZ AM5T-4812DH35-VZ AM5T-4815DH35-VZ AM5T-4824DH35-VZ Input Specifications Parameters Voltage Range Filter Start up time Absolute Maximum Rating Peak Input Voltage time Isolation Specifications Parameters Tested I/O voltage 36-72 36-72 36-72 36-72 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 36-72 36-72 36-72 36-72 36-72 Output Voltage (V) ±9 ±12 ±15 ±24 ±5 ±9 ±12 ±15 ±24 ±5 ±9 ±12 ±15 ±24 ±5 ±9 ±12 ±15 ±24 Typical 12 Vin 24 Vin 48 Vin 20 -0.7-24 -0.7-40 -0.7-80 15 12 24 48 Parameters Voltage accuracy Voltage balance Short circuit protection Short circuit restart Line voltage regulation Load voltage regulation Temperature coefficient Ripple & Noise www.aimtec.com F 051e R12.E HL-LL 25-100% Load At 20MHz Bandwidth ±0.5 ±0.5 ±0.02 60 Rated 1500 (3500 H35 model) Maximum Continuous Auto Recovery Tel: +1 514 620 2722 2 of 4 VDC ms ±1 ±1 Units VDC Typical Balanced Load 78 78 80 77 72 76 77 77 80 74 76 78 78 75 76 78 78 80 77 ms > 1000 60 Conditions Efficiency (%) π (Pi) Network Typical 3 sec ±220 ±220 ±220 ±100 ±1000 ±220 ±220 ±220 ±100 ±1000 ±220 ±220 ±220 ±100 ±1000 ±220 ±220 ±220 ±100 Maximum 9-18 18-36 36-72 Conditions Capacitive load, max (μF) ±277 ±208 ±166 ±104 ±500 ±277 ±208 ±166 ±104 ±500 ±277 ±208 ±166 ±104 ±500 ±277 ±208 ±166 ±104 Nominal Resistance Capacitance Output Specifications Output Current max (mA) Units VDC MOhm pF Units % % % % %/oC mV p-p Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM5T-VZ 5 Watt | DC-DC Converter General Specifications Parameters Switching frequency Operating temperature Storage temperature Max Case temperature Cooling Humidity Case material Weight Dimensions(L x W x H) MTBF Conditions Typical 100-400 Full Load (see derating chart) Maximum -40 to +85 -40 to +125 Free air convection 100 Units KHz o C o C o C 95 % Nickel coated copper 15 g Tolerance ±0.5 mm or ±0.02 inches 1.25 x 0.8 x 0.4 inches 31.75 x 20.32 x 10.16 mm >2,200,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) Safety Specifications Parameters Agency approvals CE Standards Designed to meet IEC 60950-1 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Pin Out Specifications Pin Single 2 3 9 11 14 16 22 23 -V Input -V Input No pin N.C. +V Output -V Output +V Input +V Input 1500 VDC Dual -V Input -V Input Common -V Output +V Output Common +V Input +V Input Dimensions 22.86 (0.90) 0.50 (0.02) 20.32 (0.80) 2 3 9 11 Bottom View 23 22 16 14 5.08 (0.20) 2.54 (0.10) Built-in Stand-offs to ease PCB cleaning 3.05 (0.12) 10.16 (0.40) Printed Face 15.24 (0.60) 31.75 (1.25) www.aimtec.com F 051e R12.E Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM5T-VZ 5 Watt | DC-DC Converter Derating Free Air Convection 85 º C Output Power % 100 80 60 Safe Operating Area 40 20 0 -40 0 25 50 75 85 100 Ambient Temperature º C NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.E Tel: +1 514 620 2722 4 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only