Filtrex Intelligent Photoelectric Smoke Detector ™ Models FTX-P1 FTX-P1A Base B501B-FTX B501B-FTXA Accessories RF-FTX RA400Z M02-04-01 M02-09-00 Product Overview Intelligent communications High density filter removes particulate down to 32 microns Air delivery system is separately powered and fully supervised System Sensor Filtrex Smoke Detector provides early warning smoke detection in difficult environments where traditional smoke detectors are not practical. Filtrex provides protection in dirty, dusty environments that tend to cause false alarms with standard smoke detectors. Operation: Resistant to water spray in applications where occasional hose-down cleaning is performed Using a small air intake fan and a high density replaceable filter, air and smoke are drawn into a photoelectric sensing chamber while airborne particulate and water spray are removed. When the filter becomes too clogged to draw adequate air into the sensing chamber, power is cut from the detector, causing a trouble signal at the fire alarm control panel. When the filter is replaced, power-up is automatic. Optional remote LED accessory Applications: Filter is easily field replaceable Rotary decade address switches Compatible with 200 and 500 Series products’ protocol No modification required to panels compatible with System Sensor intelligent photoelectric smoke detectors Animal research facilities Institutional laundry facilities Amusement parks Zoos Performance theatres Loading docks Paper mills Textile mills Specifications Size 3.5″ (8.9 cm) H × 6.1″ (15.5 cm) diam, in B501B-FTX base Weight 7.3 oz. (207 grams) External/Auxiliar y Power Supply Voltage Range 15–30 VDC (filtered) Air Intake Fan On 5 seconds ever y 30 seconds External/Auxiliar y Power Supply Maximum Current 123 mA Filter Air flow checked ever y 4 hours External/Auxiliar y Power Supply Avg. Current 27 mA Signaling Line Circuit Supply Range 15–32 VDC Temperature Range 32º to 122°F (0° to 50° C) Detector Current (max. avg.) 250 µA @ 24 VDC (without communication) 360 µA @ 24 VDC (one communication ever y 5 seconds with LED enabled) Relative Humidity 10% to 93% noncondensing Filtrex Wiring Diagram + CONTROL PANEL – 2(–) 1(+) 3(RA ) 4(S ) 3(R A) 4 (S) X+ AU X AU X AU X+ AU AUX. POWER SUPPLY 2(–) – – 1(+) + – Ordering Information Model Description FTX-P1 Photoelectric smoke detector FTX-P1A Photoelectric smoke detector, (Canadian) B501B-FTX Flanged adapter base, 6.1″ (15.5 cm) B501B-FTXA Flanged adapter base, 6.1″ (15.5 cm), (Canadian) RF-FTX Replacement filter cover assembly (6 pack) RA400Z Remote LED annunciator, fits U.S. single gang electrical box M02-04-01 Test magnet M02-09-00 Test magnet with telescoping handle System Sensor Sales and Service System Sensor Headquarters 3825 Ohio Avenue St. Charles, IL 60174 Ph: 800/SENSOR2 Fx: 630/377-6495 Documents-on-Demand 800/736-7672 x3 www.systemsensor.com System Sensor Canada Ph: 905.812.0767 Fx: 905.812.0771 System Sensor in China Ph: 86.29.524.6253 Fx: 86.29.524.6259 System Sensor – Far East Ph: 85.22.191.9003 Fx: 85.22.736.6580 System Sensor Europe Ph: 44.1403.276500 Fx: 44.1403.276501 System Sensor in Singapore Ph: 65.273.2230 Fx: 65.273.2610 System Sensor – Australia Ph: 613.54.281.142 Fx: 613.54.281.172 © 1999 System Sensor. The company reserves the right to change product specifications without notice. System Sensor – India Ph: 91.124.637.1770 x.2700 Fx: 91.124.637.3118 A05-985-01•7/99(10K)•#522