GT01 Series Gate Drive Transformer Features Applications • Smallest size available on the market • Voltage Regulator Modules • Designed for frequencies from 500 kHz to over 1 MHz • High Frequency AC/DC and DC/DC Converters • Flat top for pick and place applications • Pulse/Signal Transformers • Multiple turns ratios available Packaging Reel diameter: 13”, Reel width: 16mm, Pieces/reel: 2000 Mechanical 6 5.2 max 5 Recommended PCB layout 1.0 4 color dot for pin 1 Schematic N1 1 N2 3 N1 1 N2 2 6 4 6 5 N3 3 1.5 5.0 max 3.3 max XXX 1 1 2 3.0 3 3 2 1.4 Top View Top View Side View A 4 units: mm Electrical Specifications Part Number Turns Ratio Inductance1 DCR1 N1:N2:N3 (µH,min.) (mΩ,max.) Lkg. Ind. E-T Product5 Hi-Pot (nH) (Vµs) (Vdc) GT01-110-007 1:1 200 180:180 130 7.5 500 GT01-110-011 1:1 450 470:470 180 11.2 500 GT01-110-015 1:1 800 620:620 200 15.0 500 GT01-120-007 1:2 50 95:180 75 7.5 500 GT01-120-010 1:2 90 180:330 75 10.0 500 GT01-120-015 1:2 200 250:520 95 15.0 500 GT01-111-007 1:1:1 200 270:270:270 100 7.5 500 GT01-111-011 1:1:1 450 470:470:470 150 11.2 500 GT01-122-007 1:2:2 50 130:260:260 65 7.5 500 GT01-122-010 1:2:2 90 220:430:430 75 10.0 500 GT01-122-015 1:2:2 200 330:690:690 130 15.0 500 GT01-133-007 1:3:3 22 100:270:270 100 7.5 500 GT01-133-011 1:3:3 50 170:460:460 70 11.2 500 GT01-133-015 1:3:3 90 220:650:650 80 15.0 500 Specifications subject to change without notice. 800.729.2099 tel www.icecomponents.com 1. Tested at 100kHz, 0.1Vrms. 2. Electrical specifications at 25°C. 3. Operating range: -40°C to +130°C. 4. Meets UL 94V-0. 5. E-T product rating is for secondary (gate) windings and Note: 1.isWhite dot forupon 22.0 Va* flux us density based Yellow dot 15.0 VGauss * us at 25°C in a of for 2200 Pink dotbipolar for 11.0 Vdrive * us application. 2. marking 110 for turns ratio 1:1 marking 120 for turns ratio 1:2 marking 111 for turns ratio 1:1:1 marking 122 for turns ratio 1:2:2 marking 133 for turns ratio 1:3:3 81 (02/08) GT01-1