DN Series Crystal Micro Miniature SM Crystal Frequency Range 12.000MHz to 40.000MHz RoHS Compliant ELECTRICAL CHARACTERISTICS Parameter Value Frequency Range Frequency Tolerance / Stability Operating Temperature Range Storage Temperature Range Aging at +25°C Shunt Capacitance Load Capacitance Equivalent Series Resistance (ESR) Mode of Operation Drive Level 12.000MHz to 40.000MHz (See Part Number Guide for Option) (See Part Number Guide for Option) -40°C to +85°C ±3 ppm / year max Less than 5pF (See Part Number Guide for Option) (See ESR Chart) (See ESR Chart) 1µW to 100µW ENVIRONMENTAL & MECHANICAL SPEC Shock Solderability Solvent Resistance Vibration Gross Leak Test Fine Leak Test MSL Reflow Conditions MIL-STD-883, Method 2002 Cond B MIL-STD-883, Method 2003 EQUIVALENT SERIES RESISTANCE CHART MIL-STD-202, Method 215 Frequency Range 12.000MHz to 16.000MHz 16.000MHz to 30.000MHZ 30.000MHz to 40.000MHz MIL-STD-883, Method 2007, Cond A MIL-STD-883, Method 1014, Cond C MIL-STD-883, Method 1014, Cond A2 Level 1 per IPC/JEDEC J-STD 20 260°C max 10 sec per IPC/JEDEC J-STD 20 ESR 60Ω max 50Ω max 40Ω max Mode / Cut Fund / AT Fund / AT Fund / AT PART NUMBER GUIDE MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Specifications subject to change without notice Page 1 of 2 Pb RoHS Free Revision: DN121113A Compliant DN Series Crystal 1. 2. 3. 4. 5. APPLICABLE STANDARDS / SPECIFICATIONS: ANSI Y14.5M, DIMENSIONS AND TOLERANCES. DIMENSIONS ARE MILLIMETERS [INCHES]. MILLIMETERS ARE THE CONTROLLING DIMENSIONS, INCHES ARE FOR REFERENCE ONLY. THE PIN NUMBERS ARE FOR REFERENCE ONLY AND ARE NOT TO BE MARKED ON THE UNIT. AN EXTERNAL BYPASS CAPACITOR IS RECOMMENDED. TOLERANCES ARE ±0.25 [.010] FOR TWO PLACE DECIMALS AND ±0.5 [.02] FOR ONE PLACE DECIMALS. DO NOT SCALE DRAWING Mechanical Dimensions Specifications subject to change without notice Page 2 of 2 Revision: DN121113A