MBRB20100CT Preferred Device SWITCHMODE Power Rectifier D2PAK Surface Mount Power Package The D2PAK Power Rectifier is a state−of−the−art device that employs the use of the Schottky Barrier principle with a platinum barrier metal. http://onsemi.com Features • • • • • • • • • SCHOTTKY BARRIER RECTIFIER 20 AMPERES 100 VOLTS Package Designed for Power Surface Mount Applications Center−Tap Configuration Guardring for Stress Protection Low Forward Voltage 175°C Operating Junction Temperature Epoxy Meets UL 94 V−0 @ 0.125 in Short Heat Sink Tab Manufactured − Not Sheared! Similar in Size to Industry Standard TO−220 Package Pb−Free Packages are Available 1 4 3 Mechanical Characteristics • Case: Epoxy, Molded, Epoxy Meets UL 94 V−0 • Weight: 1.7 Grams (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal • • • Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds Device Meets MSL1 Requirements ESD Ratings: Machine Model, C >400 V Human Body Model, 3B >8000 V 4 1 D2PAK CASE 418B STYLE 3 3 MARKING DIAGRAM MAXIMUM RATINGS (Per Leg) Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Rating VRRM VRWM VR 100 V Average Rectified Forward Current (Rated VR, TC = 110°C) Total Device IF(AV) 10 20 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz, TC = 100°C) IFRM 20 A Non−Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) IFSM 150 A Peak Repetitive Reverse Surge Current (2.0 s, 1.0 kHz) IRRM 0.5 A Storage Temperature Range Tstg −65 to +175 °C Operating Junction Temperature (Note 1) TJ −65 to +175 °C Voltage Rate of Change (Rated VR) dv/dt 10,000 V/s Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dPD/dTJ < 1/RJA. Semiconductor Components Industries, LLC, 2006 February, 2006 − Rev. 6 1 AY WW B20100G AKA A Y WW B20100 G AKA = Assembly Location = Year = Work Week = Device Code = Pb−Free Package = Diode Polarity ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. Preferred devices are recommended choices for future use and best overall value. Publication Order Number: MBRB20100CT/D MBRB20100CT THERMAL CHARACTERISTICS (Per Leg) Characteristic Thermal Resistance, Junction−to−Case Junction−to−Ambient (Note 2) Symbol Value Unit RJC RJA 2.0 50 °C/W ELECTRICAL CHARACTERISTICS (Per Leg) Maximum Instantaneous Forward Voltage (Note 3) (iF = 10 Amp, TC = 125°C) (iF = 10 Amp, TC = 25°C) (iF = 20 Amp, TC = 125°C) (iF = 20 Amp, TC = 25°C) vF 0.75 0.85 0.85 0.95 V Maximum Instantaneous Reverse Current (Note 3) (Rated dc Voltage, TJ = 125°C) (Rated dc Voltage, TJ = 25°C) iR 6.0 0.1 mA 2. When mounted using minimum recommended pad size on FR−4 board. 3. Pulse Test: Pulse Width = 300 s, Duty Cycle ≤ 2.0%. ORDERING INFORMATION Package Shipping† MBRB20100CT D2PAK 50 Units / Rail MBRB20100CTG D2PAK 50 Units / Rail Device (Pb−Free) MBRB20100CTT4 MBRB20100CTT4G D2PAK 800 Units / Tape & Reel D2PAK (Pb−Free) 800 Units / Tape & Reel 50 TJ = 150°C I R, REVERSE CURRENT (mA) 125°C 20 150°C 10 100°C 5 TJ = 25°C 3 10 TJ = 125°C TJ = 100°C 1 0.1 1 0.01 0.5 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 TJ = 25°C 0 20 40 60 80 100 120 vF, INSTANTANEOUS VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 1. Typical Forward Voltage Per Diode Figure 2. Typical Reverse Current Per Diode 32 20 RATED VOLTAGE APPLIED 28 24 18 AVERAGE POWER (WATTS) I F(AV), AVERAGE FORWARD CURRENT (AMPS) i F, INSTANTANEOUS FORWARD CURRENT (AMPS) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. RJC = 2°C/W 20 16 SQUARE WAVE 12 8 DC 4 IPK/IAV = 5 TJ = 125°C 16 PI IPK/IAV = 10 14 12 IPK/IAV = 20 10 SQUARE WAVE 8 6 DC 4 2 0 80 90 100 110 120 130 140 TC, CASE TEMPERATURE (°C) 150 160 Figure 3. Typical Current Derating, Case, Per Leg 0 0 2 4 6 8 10 12 14 AVERAGE CURRENT (AMPS) 16 18 20 Figure 4. Average Power Dissipation & Average Current http://onsemi.com 2 MBRB20100CT PACKAGE DIMENSIONS D2PAK CASE 418B−04 ISSUE J NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 418B−01 THRU 418B−03 OBSOLETE, NEW STANDARD 418B−04. C E V W −B− 4 DIM A B C D E F G H J K L M N P R S V A 1 2 S 3 −T− SEATING PLANE K W J G D H 3 PL 0.13 (0.005) M T B M INCHES MIN MAX 0.340 0.380 0.380 0.405 0.160 0.190 0.020 0.035 0.045 0.055 0.310 0.350 0.100 BSC 0.080 0.110 0.018 0.025 0.090 0.110 0.052 0.072 0.280 0.320 0.197 REF 0.079 REF 0.039 REF 0.575 0.625 0.045 0.055 STYLE 3: PIN 1. ANODE 2. CATHODE 3. ANODE 4. CATHODE VARIABLE CONFIGURATION ZONE N R P U L L M M L M F F F VIEW W−W 1 VIEW W−W 2 VIEW W−W 3 SOLDERING FOOTPRINT* 8.38 0.33 1.016 0.04 10.66 0.42 5.08 0.20 3.05 0.12 17.02 0.67 SCALE 3:1 mm inches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 3 MILLIMETERS MIN MAX 8.64 9.65 9.65 10.29 4.06 4.83 0.51 0.89 1.14 1.40 7.87 8.89 2.54 BSC 2.03 2.79 0.46 0.64 2.29 2.79 1.32 1.83 7.11 8.13 5.00 REF 2.00 REF 0.99 REF 14.60 15.88 1.14 1.40 MBRB20100CT SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 4 For additional information, please contact your local Sales Representative. MBRB20100CT/D