05002 DA05L thru DA24CM Only One Name Means ProTek’Tion™ STANDARD CAPACITANCE TVS ARRAY APPLICATIONS ✔ Low Frequency I/O Ports ✔ RS-232 & RS-423 Data Lines ✔ Power Bus Lines ✔ Monitoring & Industrial Signal and Data Ports ✔ Microprocessor Based Equipment IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 24A, 8/20µs Level 2 (Line-Ground) & Level 3 (Line-Line) 8 PIN DIP FEATURES ✔ 800 Watts Peak Pulse Power per Line (tp=8/20µs) ✔ Unidirectional & Bidirectional Configuration ✔ ESD Protection > 40 kilovolts ✔ Available in 5V, 12V, 15V & 24V ✔ Standard Dual-In-Line Package ✔ Protects 4 to 6 Lines MECHANICAL CHARACTERISTICS ✔ Molded 8 Pin Dual-In-Line (DIP) Package ✔ Weight 0.55 grams (Approximate) ✔ Flammability rating UL 94V-0 ✔ Packaging: 50 Pieces Per Tube ✔ Marking: Logo, Part Number, Date Code & Pin One Defined By Dot on Top of Package PIN CONFIGURATIONS UNIDIRECTIONAL BIDIRECTIONAL DAxL Series DAxxCL Series 8 7 6 5 8 7 6 5 1 2 3 4 1 2 3 4 DAxxCM Series DAxxM Series 05002.R6 10/03 8 7 6 5 8 7 6 5 1 2 3 4 1 2 3 4 1 www.protekdevices.com DA05L thru DA24CM DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 800 Watts Operating Temperature TJ -55°C to 150°C °C TSTG -55°C to 150°C °C IF 10 Amps PARAMETER Storage Temperature Forward Surge Rating (See Note 1) ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (See Notes 1 & 2) DA05L DA12L DA15L DA24L DA05M DA12M DA15M DA24M DA05CL DA12CL DA15CL DA24CL DA05CM DA12CM DA15CM DA24CM RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM CLAMPING VOLTAGE (See Fig. 2) VWM VOLTS @ 1mA V(BR) VOLTS @ IP = 1A VC VOLTS 5.0 12.0 15.0 24.0 5.0 12.0 15.0 24.0 5.0 12.0 15.0 24.0 5.0 12.0 15.0 24.0 6.0 13.3 16.7 26.7 6.0 13.3 16.7 26.7 6.0 13.3 16.7 26.7 6.0 13.3 16.7 26.7 12.5 26.0 33.0 52.1 12.5 26.0 33.0 52.1 12.5 26.0 33.0 52.1 12.5 26.0 33.0 52.1 MAXIMUM LEAKAGE CURRENT TYPICAL CAPACITANCE @8/20µs VC @ IPP @VWM ID µA @0V, 1 MHz CJ pF 24.6V @ 45A 32.9V @ 34A 37.7V @ 27A 48.5V @ 22A 24.6V @ 45A 32.9V @ 34A 37.7V @ 27A 48.5V @ 22A 24.6V @ 45A 32.9V @ 34A 37.7V @ 27A 48.5V @ 22A 24.6V @ 45A 32.9V @ 34A 37.7V @ 27A 48.5V @ 22A 200 2 2 2 200 2 2 2 200 2 2 2 200 2 2 2 880 440 400 275 880 440 400 275 500 385 300 200 500 385 300 200 Note 1: Unidirectional Only: VF = 1.5 Volts @ 10A, 300µs (square wave). Note 2: The “C” suffix specifies a bidirectional device, such as DA05CM or DA12CL. 05002.R6 10/03 2 www.protekdevices.com DA05L thru DA24CM GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - Watts 10,000 800W 8/20µs Waveform 1,000 100 10 0.1 10 100 td - Pulse Duration - µs 1,000 10,000 FIGURE 2 PULSE WAVE FORM 120 FIGURE 3 POWER DERATING CURVE 100 tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t I /2 PP 20 Peak Pulse Power 8/20µs 80 % Of Rated Power IPP - Peak Pulse Current - % of IPP 1 60 40 20 Average Power 0 0 0 05002.R6 10/03 5 10 15 t - Time - µs 20 25 0 30 3 25 50 75 100 125 TL - Lead Temperature - °C 150 www.protekdevices.com DA05L thru DA24CM PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE 8 PIN DIP A DIMENSIONS Orientation Dot (Pin #1) DIM B I 4 Places C F G J 4 Places H D 4 Places L K 8 Places E A B C D E F G H I J K L MILLIMETERS MIN MAX 6.10 7.37 0.25 0° 0.51 3.17 0.84 TYP 0.38 2.54 TYP INCHES MIN MAX 10.2 0.400 6.60 0.240 0.260 7.87 0.290 0.310 0.50 0.010 0.020 10° 0° 10° 0.020 5.08 0.200 0.125 1.78 0.070 0.84 TYP 0.033 TYP 0.033 TYP 0.53 0.015 0.021 2.54 TYP 0.100 TYP 0.100 TYP NOTES: 1. Dimensions are exclusive of mold flash and metal burrs. BULK ORDERING NOMENCLATURE: 1. No Suffix = Product Shipped in Tubes of 50 pcs per Tube. Outline & Dimensions: Rev 1 - 11/01, 06004 COPYRIGHT © ProTek Devices 2003 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05002.R6 10/03 4 www.protekdevices.com