GSR62 series VCXO [ Voltage Controlled Crystal Oscillators ] 3.3 V SMD True Sine wave 6 pads 11.4 x 9.6 x 2.5 mm Applications : ● High purity and low total harmonic distortion. Ideal for audio applications General Specifications Paramenters Electrical Spec. Input Voltage ( V DD) 3.3 V ± 5 % Frequency Range 10.0 ~ 30.0 MHz Output Wave Form True Sine wave output Output Level 1.0 V p-p ( typical ) Frequency Deviation Range Standard : ± 80 ppm ( min. ) Initial Freq. Accuracy ( at 25 °C ) To tune to the nomial frequency with Vc = 1.65V ± 0.2V Control Voltage Center / Control Voltage Range 1.65 VDC / 0.3V to 3.0V Load 10 KΩ // 10 pF load Harmonics < - 25dBc (frequency dependent) Current Consumption ( typical ) 1.1 mA Input Impedance > 0.5 M Ω Modulation Bandwidth ( at -3 dB) 25 KHz ( min.) Voltage Control Range 0.0 V to VDD with control voltage center at 50% of V DD Start - Up Time (Ts) 2.0 m Sec.( typ.) Linearity ±10 % ( max.) Storage Temperature - 50°C to 100°C Aging ± 3 ppm per year (max.) Frequency Stability over Operating Temperature Range Frequency Stability (1) Codes ± 50 ppm ± 100 ppm Commercial ( -10°C to +70°C ) A B C Industrial ( -40°C to +85°C ) D E F Phase Noise ( typical ) [ 13.0 MHz at 3.3V ] Outline Dimensions ± 25 ppm Offset dBc / Hz 10 Hz 100 Hz -90 -123 If non-standard , please enter the desired stability after the " C " or " I " For example : " C20 " ±20 ppm over -10°C to +70°C ; " I20 " ± 20 ppm over -40°C to +85°C 1K Hz 10 KHz 100KHz 1 MHz 10 MHz -135 -140 -145 -147 -150 ( Unit : mm ) Mercury www .mercury-crystal.com ■Taiwan : (886)-2-2406-2779 / [email protected] ■U.S.A: (1)-909-466-0427 / [email protected] ■China : (86)-512-5763-8100 / [email protected]