FSP FSP400-70LQ Industrial level of switching power Datasheet

IPC PSU
FSP400-70LQ
DESCRIPTION
FSP400-70LQ is an industrial level of switching power
supply. The power supply comes to offer the total power
capacity up to 400 Watts, and uses unique active PFC
(Power Factor C orrection) circuit design with its high-load
electrical components, makes it to be perfectly used in an
industrial environment. In addition, with its full range of
input and output electrical features, the power supply is
ideally the best choice for server, workstation,
communication or any other automation applications to
use. The product also complies with the latest safety and
EMC standards, which is perfectly to meet various
regulations worldwide.
SAFETY STANDARD APPAOVAL
APPLICATION
For standard, advanced server, NAS and industrial power
system.
OUTPUT SPECIFICATION
Hold up Time:
FEATURES
80 Plus Gold
Low Ripple & Noise
Output over voltage protection
Short circuit protection on all outputs
Resettable power shut down
INTERNAL 4 cm fan
100% burn-in under high ambient temperature(50℃)
Vacuum-impregnated transformer
MTBF:100K hours at 25℃
100% Hi-pot tested
Line input fuse protection
Ouput Voltage
Regulation:
Output Rise Time:
W ATTAGE
Wattage:
400W
Ripple & Noise:
DIMENSION
Dimension:
190mm(L) x 81.5mm(W) x
40.5mm(H)
PRODUCT HIGHLIGHT
Efficiency Level:
Altitude:
PMBus:
80 Plus Gold
5000M
For standard, advanced server,
NAS and industrial power
system.
ENVIRONMENTAL SPECIFICATION
TEMP.Range:
Storage Temperature: 20°C to + 80℃
The power supply have a
minimum predicted
MTBF(MIL-HDBK-217) of
100,000 hours of continuous
operation at 25℃,
maximum-output load, and
nominal AC inout voltage
MTBF:
INPUT SPECIFICATION
Input Range:
Input Frequency:
Input Current:
115V/60Hz 16mSec.
Minimum@100% Load,
230V/50Hz 16mSec.
Minimum,@100% Load
+3.3Vdc output : +3.5 Vdc
minimum, + 4.8Vdc
maximum
+5Vdc output : +5.5 Vdc
minimum, + 7Vdc maximum
+12Vdc output : +13.4 Vdc
minimum, + 16Vdc
maximum
115V-rms/230V-rms 5V
20ms Maximum
115V-rms/230V-rms 12V
20ms Maximum
3.3V:50mV p-p
5V:50mV p-p
12V1:120mV p-p
12V2:120mV p-p
-12V:120mV p-p
5Vsb:50mV p-p
-5V:100mV p-p
90-264 Vac
47-63 Hz
115V@ 6.3 Amps-rms maximum
230V@ 3.0 Amps-rms maximum
GENERAL SPECIFICATION
Effciency:
Voltage
Regulation:
PWOK Delay Time:
92% 230VAC
+3.3V, +12V, +5V, +5SB: ±5%
-12V, -5V: ±10%
500ms > PWOK > 100ms
*Output Voltage and C urrent Rating
+3.3V
Ripple-Noise(R-P) mV
50mV
Regulation Load %
±5%
Output Max.(A)
16A
Output Min.(A)
0.3A
+5V
50mV
±5%
16A
0.3A
+12V1
120mV
±5%
18A
0.5A
+12V2
120mV
±5%
18A
0.5A
NOTES
5V, 3.3V, 12V, -12V Will have the regulation to 10% when all load take off.
The +3.3V and +5V total output shall not exceed 120 watts.
The total output shall not exceed 400 watts
MECHANICAL SPECIFICATION
This content is subject to change, please refer to specification for m ore detail.
FSP reserve the right to change the content without prior notice
-12V
120mV
±10%
0.5A
0A
-5V
100mV
±10%
0.2A
0A
+5Vsb
50mV
±5%
3A
0A
Similar pages