PHILIPS BAP1321-03 Silicon pin diode Datasheet

DISCRETE SEMICONDUCTORS
DATA SHEET
BAP1321-03
Silicon PIN diode
Product specification
Supersedes data of 2001 May 11
2004 Feb 17
Philips Semiconductors
Product specification
Silicon PIN diode
BAP1321-03
FEATURES
PINNING
• High voltage, current controlled
PIN
DESCRIPTION
• RF resistor for RF attenuators and switches
1
cathode
• Low diode capacitance
2
anode
• Low diode forward resistance
• Very low series inductance
• For applications up to 3 GHz.
1
2
APPLICATIONS
sym006
Top view
• RF attenuators and switches.
Marking code: V8.
The marking bar indicates the cathode.
DESCRIPTION
Fig.1
Planar PIN diode in a SOD323 (SC-76) ultra small SMD
plastic package.
Simplified outline (SOD323; SC-76) and
symbol.
ORDERING INFORMATION
PACKAGE
TYPE
NUMBER
NAME
BAP1321-03
−
DESCRIPTION
VERSION
plastic surface mounted package; 2 leads
SOD323
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134).
SYMBOL
PARAMETER
CONDITIONS
MIN.
MAX.
UNIT
VR
continuous reverse voltage
−
60
V
IF
continuous forward current
−
100
mA
Ptot
total power dissipation
−
500
mW
Tstg
storage temperature
−65
+150
°C
Tj
junction temperature
−65
+150
°C
2004 Feb 17
Ts ≤ 90 °C
2
Philips Semiconductors
Product specification
Silicon PIN diode
BAP1321-03
CHARACTERISTICS
Tj = 25 °C unless otherwise specified.
SYMBOL
PARAMETER
CONDITIONS
TYP.
MAX.
UNIT
VF
forward voltage
IF = 50 mA
0.95
1.1
V
IR
reverse leakage current
VR = 60 V
−
100
nA
Cd
diode capacitance
VR = 0; f = 1 MHz
0.4
−
pF
rD
diode forward resistance
VR = 1 V; f = 1 MHz
0.35
0.45
pF
VR = 20 V; f = 1 MHz
0.25
0.32
pF
IF = 0.5 mA
3.4
5.0
Ω
IF = 1 mA
2.4
3.6
Ω
IF = 10 mA
1.2
1.8
Ω
f = 100 MHz; note 1
0.85
1.3
Ω
VR = 0; f = 900 MHz
16.6
−
dB
VR = 0; f = 1800 MHz
11.6
−
dB
VR = 0; f = 2450 MHz
9.2
−
dB
IF = 100 mA
|s21|2
|s21|2
|s21|2
|s21|2
|s21|2
isolation
insertion loss
insertion loss
insertion loss
insertion loss
IF = 0.5 mA; f = 900 MHz
0.26
−
dB
IF = 0.5 mA; f = 1800 MHz
0.35
−
dB
IF = 0.5 mA; f = 2450 MHz
0.44
−
dB
IF = 1 mA; f = 900 MHz
0.20
−
dB
IF = 1 mA; f = 1800 MHz
0.29
−
dB
IF = 1 mA; f = 2450 MHz
0.38
−
dB
IF = 10 mA; f = 900 MHz
0.13
−
dB
IF = 10 mA; f = 1800 MHz
0.22
−
dB
IF = 10 mA; f = 2450 MHz
0.32
−
dB
IF = 100 mA; f = 900 MHz
0.10
−
dB
IF = 100 mA; f = 1800 MHz
0.20
−
dB
IF = 100 mA; f = 2450 MHz
0.29
−
dB
τL
charge carrier life time
when switched from IF = 10 mA to IR = 6 mA;
RL = 100 Ω; measured at IR = 3 mA
0.5
−
µs
LS
series inductance
IF = 100 mA; f = 100 MHz
1.5
−
nH
Note
1. Guaranteed on AQL basis: inspection level S4, AQL 1.0.
THERMAL CHARACTERISTICS
SYMBOL
Rth(j-s)
2004 Feb 17
PARAMETER
thermal resistance from junction to soldering point
3
VALUE
UNIT
120
K/W
Philips Semiconductors
Product specification
Silicon PIN diode
BAP1321-03
GRAPHICAL DATA
MLD591
10
MLD592
500
Cd
handbook, halfpage
handbook, halfpage
rD
(Ω)
(fF)
400
300
1
200
100
10−1
10−1
1
10
IF (mA)
0
102
Fig.3
MLD593
0
21
(dB)
(1)
(2)
21
−10
−20
−0.6
−30
1
(1) IF = 100 mA.
(2) IF = 10 mA.
2
f (GHz)
−40
3
1
2
f (GHz)
3
Diode zero biased and inserted in series with a 50 Ω stripline circuit.
Tamb = 25 °C.
Insertion loss (|s21|2) of the diode as a
function of frequency; typical values.
2004 Feb 17
0
(3) IF = 1 mA.
(4) IF = 0.5 mA.
Diode inserted in series with a 50 Ω stripline circuit
and biased via the analyzer Tee network.
Tamb = 25 °C.
Fig.4
MLD594
(dB)
(4)
0
Diode capacitance as a function of reverse
voltage; typical values.
0
−0.4
−0.8
20
handbook, halfpage
s 2
(3)
−0.2
16
Tj = 25 °C; = 1 MHz.
Forward resistance as a function of
forward current; typical values.
handbook, halfpage
s 2
12
VR (V)
Tj = 25 °C; f = 100 MHz.
Fig.2
8
4
0
Fig.5
4
Isolation (|s21|2) of the diode as a function
of frequency; typical values.
Philips Semiconductors
Product specification
Silicon PIN diode
BAP1321-03
PACKAGE OUTLINE
Plastic surface mounted package; 2 leads
SOD323
A
D
E
X
v
HD
M
A
Q
1
2
bp
A
A1
(1)
c
Lp
detail X
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
A1
max
bp
c
D
E
HD
Lp
Q
v
mm
1.1
0.8
0.05
0.40
0.25
0.25
0.10
1.8
1.6
1.35
1.15
2.7
2.3
0.45
0.15
0.25
0.15
0.2
Note
1. The marking bar indicates the cathode
OUTLINE
VERSION
SOD323
2004 Feb 17
REFERENCES
IEC
JEDEC
JEITA
SC-76
5
EUROPEAN
PROJECTION
ISSUE DATE
99-09-13
03-12-17
Philips Semiconductors
Product specification
Silicon PIN diode
BAP1321-03
DATA SHEET STATUS
LEVEL
DATA SHEET
STATUS(1)
PRODUCT
STATUS(2)(3)
Development
DEFINITION
I
Objective data
II
Preliminary data Qualification
This data sheet contains data from the preliminary specification.
Supplementary data will be published at a later date. Philips
Semiconductors reserves the right to change the specification without
notice, in order to improve the design and supply the best possible
product.
III
Product data
This data sheet contains data from the product specification. Philips
Semiconductors reserves the right to make changes at any time in order
to improve the design, manufacturing and supply. Relevant changes will
be communicated via a Customer Product/Process Change Notification
(CPCN).
Production
This data sheet contains data from the objective specification for product
development. Philips Semiconductors reserves the right to change the
specification in any manner without notice.
Notes
1. Please consult the most recently issued data sheet before initiating or completing a design.
2. The product status of the device(s) described in this data sheet may have changed since this data sheet was
published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com.
3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
DEFINITIONS
DISCLAIMERS
Short-form specification  The data in a short-form
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
Life support applications  These products are not
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips
Semiconductors customers using or selling these products
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Limiting values definition  Limiting values given are in
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device
at these or at any other conditions above those given in the
Characteristics sections of the specification is not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Right to make changes  Philips Semiconductors
reserves the right to make changes in the products including circuits, standard cells, and/or software described or contained herein in order to improve design
and/or performance. When the product is in full production
(status ‘Production’), relevant changes will be
communicated via a Customer Product/Process Change
Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these
products, conveys no licence or title under any patent,
copyright, or mask work right to these products, and
makes no representations or warranties that these
products are free from patent, copyright, or mask work
right infringement, unless otherwise specified.
Application information  Applications that are
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make
no representation or warranty that such applications will be
suitable for the specified use without further testing or
modification.
2004 Feb 17
6
Philips Semiconductors – a worldwide company
Contact information
For additional information please visit http://www.semiconductors.philips.com.
Fax: +31 40 27 24825
For sales offices addresses send e-mail to: [email protected]
SCA76
© Koninklijke Philips Electronics N.V. 2004
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
R77/03/pp7
Date of release: 2004
Feb 17
Document order number:
9397 750 12637
Similar pages