Fuseholders Special Types For ATO® Fuses In-Line Type SPECIFICATIONS: Electrical: Intended for use with 32 volts Autofuse® fuses rated to 20 or 30 amperes depending on wire size and terminal combinations. Mounting: Capable of snap-mounting to panel from rear. Fuseholders interlock for multiple mounting. Molded Parts: Black Thermoplastic (UL 94V2). Terminals: Brass. Tin-plated. Snap-lock into body. Ambient Temperature: – 40°C to +85°C. Wire: Stranded with PVC insulation, black #14 AWG for 155 300 Series and orange #10 AWG for 155 400 Series. PATENTED ORDERING INFORMATION: Catalog Number Assembled with 8" Wire Loop, Unassembled No Fuse 155 320U 155 300 (Terminals designed (#14 wire/ for #14 AWG terminals rated stranded wire and to 20A). marked “14”). 155 430U (Terminals designed for #10 AWG stranded wire and marked “10”). 155 400 (#10 wire/ terminals rated to 30A). Assembled with 8" Wire Loop and Fuse 155 303A 155 304A 155 305A 155 37.5A 155 310A 155 315A 155 320A 155 425A 155 430A Fuse Amperage Rating 3 4 5 7.5 10 15 20 25 30 UNASSEMBLED Typical Multiple Mounting (Fuseholders interlocked) Recommended Panel Mounting Hole (.04" / .078" thick panel) 10.54 (.415") 37.08 10.41 (.410") (1.46") 30.48 (1.20") 27.94 (1.10") 26.92 (1.06") 19.05 (.75") 24.64 (.970") .254 (.01") R. Max. Add .400" to width for each additional fuseholder 10.16 (.40") 2.5 (.098") For ATO® Fuses P.C. Board Mount Type 21.8 (.858") SPECIFICATIONS: Electrical: Intended for use with 32 volts ATO® fuses rated to 15 9.3 (.366") amperes. 22 (.866") Molded Parts: Black Thermoplastic Terminals: Copper Alloy, Tin Plated Ambient Temperature: – 40°C to +85°C. ORDERING INFORMATION: 4.5 (.177") Ref. Catalog Number: 04450715 9.3 (.366") 9 (.354") For MINI® Fuses In-Line Type — Easy Crimp Fuseholder SPECIFICATIONS: Terminals: Copper Alloy/Tin plated. Body: Black Thermoplastic. Operating Temperature: – 40°C to +105°C. FUSEHOLDERS 13 Use standard crimping tool and crimp the matted area to secure wire. (Possible crimp tool - Ideal #30-428 [Toothed Die slot] or equivalent). ORDERING INFORMATION: Catalog Number 153 002 153 003 Description 20A Max. Rating — Terminals will accept #16–22 AWG (1.0.33 mm2) stranded wire (use appropriate wire size based on fuse usage). For example — Use #16 AWG wire for 20A fuse. 30A Max. Rating — Terminals will accept #10–14 AWG (5.02.0 mm2) stranded wire (use appropriate wire size based on fuse usage). For example — Use #10 AWG wire for 30A fuse. Tool For Fuse Removal or Replacement; Part No. 097024. MATTED (CRIMP) AREA 17.02 (.67") 17.02 (.67") 11.43 (.45") END VIEW 6.35 (.25") 52.58 (2.07") Max SIDE VIEW * Please refer to Fuseology section for information on proper fuseholder de-rating. w w w. l i t t e l f u s e . c o m 479