Axial Lead and Cartridge Fuses Designed to IEC Standard 5 x 20 mm Time Lag Fuse (SIo-Blo ) ® Fuse 219 Series D ® ® V E • Designed to International (IEC) Standards for use globally. • Meets the IEC 60127-2, Sheet 6 specification for Time Lag Fuses. • Available in Cartridge and Axial Lead Format. • Available in ratings of 1.0 to 6.3 amperes. • Enhanced Breaking Capacity, medium I2t ELECTRICAL CHARACTERISTICS: % of Ampere Rating 150% 210% 275% 400% 1000% Opening Time 60 minutes, Minimum 2 minutes, Maximum 0.6 sec., Min.; 10 sec. Max .15 sec., Min.; 3 sec. Max 0.02 sec., Min.; 0.3 sec. Max. AGENCY APPROVALS: Sheet 6 IEC 60127: SEMKO, BSI, METI, CCC, K Mark and VDE approved 1A-6.3A. Recognized 1A to 6.3A under the components program of Underwriters Laboratories and recognized by CSA. METI A 1A to 6.3A. 219 000 Series 219 000 XE .65 (.026") INTERRUPTING RATINGS: 150 amperes @ 250VAC, unity power factor PACKAGING: For Axial Leads add packaging suffix XE. 5.2 (.205") ORDERING INFORMATION: Nominal Resistance Cold Ohms 0.055 0.042 0.032 0.029 0.022 0.017 0.013 0.010 0.0075 Nominal Melting I2t A2 Sec 3.33 5.80 10.61 14.80 23.85 39.20 70.95 114.0 204.0 22.5 MAX (.886) 40 (1.58) Average Time Current Curves 10000 11 AXIAL LEAD AND CARTRIDGE FUSES Nominal Voltage Rating 250 250 250 250 250 250 250 250 250 5.8 MAX (.228") 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A Ampere Rating 1 1.25 1.6 2 2.5 3.15 4 5 6.3 1000 100 TIME IN SECONDS Catalog Number 0219 001. 0219 1.25 0219 01.6 0219 002. 0219 02.5 0219 3.15 0219 004. 0219 005. 0219 06.3 20 (.787) 10 1 0.1 0.01 0.001 0.1 w w w. l i t t e l f u s e . c o m 1 10 CURRENT IN AMPERES 100 1000 419