Flat Cables 1.0mm High Density FLEX (300V, 105°C) Part Number (Details) Specifications Conductor Resistance: Insulation Resistance: Dielectric Strength: Flame Resistance: 237Ω/km max. 100MΩ min. (km) 2,000V AC / minute VW-1 DK 10 - 1.0 * Cable Series Number of Conductors: 10 to 68 Pitch:1.0mm Materials and Finish Insulation: PVC Conductor: 28 AWG (7/0.127mm) stranded copper wire Unmarked = 30.5 meters per Reel M = 1 meter (on request) Standard Cable Length see Part Number (Details) Features 1.0mm pitch flat cable designed for termination with a high density 2.0mm IDC connector UL Style No. 2651 Cable Dimensions Insulation Red Edge Conductor 1.0 0.90 (Number of conductors –1) x 1.0±0.4 Number of conductors x 1.0±0.4 Part Number DK10-1.0* DK12-1.0* DK14-1.0* DK15-1.0* DK16-1.0* DK20-1.0* DK25-1.0* DK26-1.0* Sockets and Connectors No. of Conductors 10 12 14 15 16 20 25 26 Part Number DK34-1.0* DK40-1.0* DK44-1.0* DK50-1.0* DK60-1.0* DK64-1.0* DK68-1.0* No. of Conductors 34 40 44 50 60 64 68 SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Trading Division Flat Cables 1.27mm High Density FLEX (300V, 105°C) Part Number (Details) Specifications Conductor Resistance: Insulation Resistance: Current Raring: Voltage Rating: Temperature Range: Dielectric Strength: Flame Resistance: 216Ω/km max. 100MΩ min. (km) 2A max. 300V -30°C to +105°C 2,000 V AC / minute VW-1 DK ** - * Cable Series Number of Conductors: 2 to 64 Unmarked = 100 meters per Reel M = 1 meter (on request) Materials and Finish Insulation: PVC, colour grey with a red edge Conductor: 28 AWG (7/0.127mm) stranded copper wire Standard Cable Length see Part Number (Details) Features 1.27mm pitch flat cable with 28AWG (7/0.127mm) conductors Ribbed on both sides enabling IDC termination on either side of the cable UL Style No. 2651, CSA, VDE 0811 Cable Dimensions Insulation Red Edge 0.93±0.05 1.27±0.05 0.2±0.05 Conductor (Number of conductors –1) x 1.27 ±0.4 Number of conductors x 1.27 ±0.4 SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Trading Division Sockets and Connectors